Hardware compatibility list

Product version

For SAFEQ Cloud to send print job data to printers, a Document Output Service must be able to deliver data to the printers IP address on port 9100 or IPP (for more details see section Ports and Protocols in the documentation).

All devices (incl. devices not covered by the list) are compatible with YSoft SAFEQ offline accounting provided they support PCL, PostScript or HPGL print language.

Do you have any questions or feedback regarding the Hardware Compatibility List?

Devices list

Vendor Please select... Brother Konica Minolta HP Lexmark FUJIFILM BI Ricoh Epson Toshiba Fuji Xerox Olivetti Sharp Xerox Kyocera Mita Develop Fuji Xerox(JAPAN) Aurora Samsung Lanier Triumph Adler Canon Ricoh (Japan) Rex Rotary Muratec Sagemcom Infotec Utax Gestetner Oki	Model	Family	MFD Show compatible only	A3 Show compatible only	Color Show compatible only	Duplex Show compatible only	Smart cable Show compatible only	Online accounting Show compatible only	Online accounting driver Show compatible only	Pure Cloud Terminal Show compatible only	Print Show compatible only	Secondary Gateway Embedded Terminal Show compatible only	Online Accounting Driver Limitations Show compatible only	Payment system Show compatible only	USB Card Reader Show compatible only	Network Card Reader Show compatible only	LD License Show compatible only	Finishing Options Show compatible only	YSoft Universal Print Driver Show compatible only	SAFEQ 5 Embedded Terminal Show compatible only	SAFEQ 6 Embedded Terminal Show compatible only	Comment Show compatible only
Brother	MFC-L8390CDW	MFC	Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Brother	MFC-L8340CDW	MFC	Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Brother	HL-L8240CDW	HL	No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Brother	HL-L8230CDW	HL	No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Brother	MFC-6710DW	MFC	Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Brother	MFC-L5710DW	MFC	Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Brother	MFC-L5710DN	MFC	Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Brother	DCP-L5510DW	DCP	Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Brother	HL-L6410DN		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Brother	MFC-L6910DN		Yes	No	No	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Konica Minolta	361i	bizhub	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	C4001i	bizhub	Yes	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	C3351i	bizhub	Yes	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
HP	Color LaserJet Enterprise MFP58045		Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	MS622de		No	No	No	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No
FUJIFILM BI	Apeos 4830	Apeos	Yes	No	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI (Maintained) : t supported. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Payment System Login speed improvement with Payment System is planned for build 77 If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Ricoh	IM C2510		Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		No	No	No	No	No	No	No	Yes	General information This is SOP G3 device Tested device model: IM C4510 Tested FW version: 1.05.1 Ricoh Embedded Terminal t tested J/SDK 12.x required Ricoh SOP Embedded Terminal Requires SafeQ 6 build 83 and newer J/SDK not required Charging and quotas are not supported. Follow [Provide trusted security certificate to Ricoh MFDs] section of this page https://portal.ysoft.com/documentation-and-knowledge-base/documentation?page=Configuring_Ricoh_for_2nd_Gen._SOP_Embedded_Terminal.html
Ricoh	IM C2010		Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		No	Yes	No	No	No	No	No	Yes	General information This is SOP G3 device Tested device model: IM C4510 Tested FW version: 1.05.1 Ricoh Embedded Terminal t tested J/SDK 12.x required Ricoh SOP Embedded Terminal Requires SafeQ 6 build 83 and newer J/SDK not required Charging and quotas are not supported. Follow [Provide trusted security certificate to Ricoh MFDs] section of this page https://portal.ysoft.com/documentation-and-knowledge-base/documentation?page=Configuring_Ricoh_for_2nd_Gen._SOP_Embedded_Terminal.html
Ricoh	IM C6010		Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		No	Yes	No	No	No	No	No	Yes	General information This is SOP G3 device Tested device model: IM C4510 Tested FW version: 1.05.1 Ricoh Embedded Terminal t tested J/SDK 12.x required Ricoh SOP Embedded Terminal Requires SafeQ 6 build 83 and newer J/SDK not required Charging and quotas are not supported. Follow [Provide trusted security certificate to Ricoh MFDs] section of this page https://portal.ysoft.com/documentation-and-knowledge-base/documentation?page=Configuring_Ricoh_for_2nd_Gen._SOP_Embedded_Terminal.html
Ricoh	IM C5510		Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		No	Yes	No	No	No	No	No	Yes	General information This is SOP G3 device Tested device model: IM C4510 Tested FW version: 1.05.1 Ricoh Embedded Terminal t tested J/SDK 12.x required Ricoh SOP Embedded Terminal Requires SafeQ 6 build 83 and newer J/SDK not required Charging and quotas are not supported. Follow [Provide trusted security certificate to Ricoh MFDs] section of this page https://portal.ysoft.com/documentation-and-knowledge-base/documentation?page=Configuring_Ricoh_for_2nd_Gen._SOP_Embedded_Terminal.html
Ricoh	IM C4510		Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		No	Yes	No	No	No	No	No	Yes	General information This is SOP G3 device Tested device model: IM C4510 Tested FW version: 1.05.1 Ricoh Embedded Terminal t tested J/SDK 12.x required Ricoh SOP Embedded Terminal Requires SafeQ 6 build 83 and newer J/SDK not required Charging and quotas are not supported. Follow [Provide trusted security certificate to Ricoh MFDs] section of this page https://portal.ysoft.com/documentation-and-knowledge-base/documentation?page=Configuring_Ricoh_for_2nd_Gen._SOP_Embedded_Terminal.html
Ricoh	IM C3510		Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		No	Yes	No	No	No	No	No	Yes	General information This is SOP G3 device Tested device model: IM C4510 Tested FW version: 1.05.1 Ricoh Embedded Terminal t tested J/SDK 12.x required Ricoh SOP Embedded Terminal Requires SafeQ 6 build 83 and newer J/SDK not required Charging and quotas are not supported. Follow [Provide trusted security certificate to Ricoh MFDs] section of this page https://portal.ysoft.com/documentation-and-knowledge-base/documentation?page=Configuring_Ricoh_for_2nd_Gen._SOP_Embedded_Terminal.html
Ricoh	IM C3010		Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		No	Yes	No	No	No	No	No	Yes	General information This is SOP G3 device Tested device model: IM C4510 Tested FW version: 1.05.1 Ricoh Embedded Terminal t tested J/SDK 12.x required Ricoh SOP Embedded Terminal Requires SafeQ 6 build 83 and newer J/SDK not required Charging and quotas are not supported. Follow [Provide trusted security certificate to Ricoh MFDs] section of this page https://portal.ysoft.com/documentation-and-knowledge-base/documentation?page=Configuring_Ricoh_for_2nd_Gen._SOP_Embedded_Terminal.html
FUJIFILM BI	ApeosPort Print C3320SD	ApeosPort Print	No	No	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No
Lexmark	CS521dn		No	No	No	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	No
Lexmark	CS622de		No	No	Yes	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	No
FUJIFILM BI	ApeosPort Print C3830SD	ApeosPort Print	No	No	Yes	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	No	SafeQ 6 is still not supported SafeQ Cloud is supported This is a Lexmark OEM and to install SafeQ Cloud terminal, please follow the relevant section about Lexmark devices bellow. https://docs.ysoft.cloud/docs/lexmark https://docs.ysoft.cloud/docs/deploying-lexmark-embedded
FUJIFILM BI	ApeosPort C3320SD	ApeosPort	Yes	No	Yes	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	No	SafeQ 6 is still not supported SafeQ Cloud is supported This is a Lexmark OEM and to install SafeQ Cloud terminal, please follow the relevant section about Lexmark devices bellow. https://docs.ysoft.cloud/docs/lexmark https://docs.ysoft.cloud/docs/deploying-lexmark-embedded
FUJIFILM BI	ApeosPort C3830SD	ApeosPort	Yes	No	Yes	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	No	SafeQ 6 is still not supported SafeQ Cloud is supported This is a Lexmark OEM and to install SafeQ Cloud terminal, please follow the relevant section about Lexmark devices bellow. https://docs.ysoft.cloud/docs/lexmark https://docs.ysoft.cloud/docs/deploying-lexmark-embedded
Ricoh	IM 370F		Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		No	Yes	No	No	No	No	No	Yes	General information This is SOP G3 device Ricoh Embedded Terminal J/SDK 12.x required Ricoh SOP Embedded Terminal Requires SafeQ 6 build 83 and newer J/SDK not required Charging and quotas are not supported. Follow [Provide trusted security certificate to Ricoh MFDs] section of this page https://portal.ysoft.com/documentation-and-knowledge-base/documentation?page=Configuring_Ricoh_for_2nd_Gen._SOP_Embedded_Terminal.html
Ricoh	IM 460F		Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		No	Yes	No	No	No	No	No	Yes	General information This is SOP G3 device Ricoh Embedded Terminal J/SDK 12.x required Ricoh SOP Embedded Terminal Requires SafeQ 6 build 83 and newer J/SDK not required Charging and quotas are not supported. Follow [Provide trusted security certificate to Ricoh MFDs] section of this page https://portal.ysoft.com/documentation-and-knowledge-base/documentation?page=Configuring_Ricoh_for_2nd_Gen._SOP_Embedded_Terminal.html
Brother	ADS-4900W		No	No	No	No	No	No		No	No	No	Scanner Only	No	Yes	No	No	No	No	No	No	Scanner Only
Brother	ADS-4700W		No	No	No	No	No	No		No	No	No	Scanner Only	No	No	No	No	No	No	No	No
HP	Color LaserJet Managed 55040DN		No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	t tested - Embedded terminal should works based on used technology
HP	LaserJet 73030	GEMSTONE 2.0	Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices.
HP	LaserJet 73025	GEMSTONE 2.0	Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices.
HP	Color LaserJet E78528	GEMSTONE 2.0	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices.
HP	Color LaserJet E78523	GEMSTONE 2.0	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices.
HP	LaserJet Managed Flow MFP E731z	GEMSTONE 2.0	Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices.
HP	LaserJet Managed MFP E731dn	GEMSTONE 2.0	Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also fits for Color LaserJet Managed Flow MFP E731z
HP	LaserJet E73140	GEMSTONE 2.0	Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also known as HP Color LaserJet Managed MFP E731dn - Also fits for Flow version Color LaserJet Flow E73140 or Color LaserJet Managed Flow MFP E731z
HP	LaserJet E73135	GEMSTONE 2.0	Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also known as HP Color LaserJet Managed MFP E731dn - Also fits for Flow version Color LaserJet Flow E73135 or Color LaserJet Managed Flow MFP E731z
HP	LaserJet E73130	GEMSTONE 2.0	Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also known as HP Color LaserJet Managed MFP E731dn - Also fits for Flow version Color LaserJet Flow E73130 or Color LaserJet Managed Flow MFP E731z
HP	LaserJet Managed Flow MFP E826z	GEMSTONE 2.0	Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices.
HP	LaserJet Managed MFP E826dn	GEMSTONE 2.0	Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also fits for Color LaserJet Managed Flow MFP E826z
HP	LaserJet E82670	GEMSTONE 2.0	Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also known as HP Color LaserJet Managed MFP E826dn - Also fits for Flow version Color LaserJet Flow E82670 or Color LaserJet Managed Flow MFP E826z
HP	LaserJet E82660	GEMSTONE 2.0	Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also known as HP Color LaserJet Managed MFP E826dn - Also fits for Flow version Color LaserJet Flow E82660 or Color LaserJet Managed Flow MFP E826z
HP	LaserJet E82650	GEMSTONE 2.0	Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also known as HP Color LaserJet Managed MFP E826dn - Also fits for Flow version Color LaserJet Flow E82650 or Color LaserJet Managed Flow MFP E826z
HP	Color LaserJet Managed Flow MFP E786z	GEMSTONE 2.0	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices.
HP	Color LaserJet Managed MFP E786dn	GEMSTONE 2.0	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also fits for Flow version Color LaserJet Managed Flow MFP E786z
HP	Color LaserJet E78635	GEMSTONE 2.0	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also known as HP Color LaserJet Managed MFP E786dn - Also fits for Flow version Color LaserJet Flow E878635 or Color LaserJet Managed Flow MFP E786z
HP	Color LaserJet E78630	GEMSTONE 2.0	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also known as HP Color LaserJet Managed MFP E786dn - Also fits for Flow version Color LaserJet Flow E878630 or Color LaserJet Managed Flow MFP E786z
HP	Color LaserJet Managed Flow MFP E877z	GEMSTONE 2.0	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices.
HP	Color LaserJet Managed MFP E877dn	GEMSTONE 2.0	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also fits for Flow HP Color LaserJet Managed Flow MFP E877z
HP	Color LaserJet E87770	GEMSTONE 2.0	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	Yes	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also known as HP Color LaserJet Managed MFP E877dn - Also fits for Flow version Color LaserJet Flow E87770 or HP Color LaserJet Managed Flow MFP E877z
HP	Color LaserJet E87760	GEMSTONE 2.0	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	Yes	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also known as HP Color LaserJet Managed MFP E877dn - Also fits for Flow version Color LaserJet Flow E87760 or HP Color LaserJet Managed Flow MFP E877z
HP	Color LaserJet E87750	GEMSTONE 2.0	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	Yes	Yes	Yes	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also known as HP Color LaserJet Managed MFP E877dn - Also fits for Flow version Color LaserJet Flow E87750 or HP Color LaserJet Managed Flow MFP E877z
Epson	M15180		Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	Yes	Yes	Yes	Yes	It is not possible to access other menu once Print feature is blocked in Access Definition
Epson	ET-M16680		Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	Yes	Yes	Yes	Yes	It is not possible to access other menu once Print feature is blocked in Access Definition
Epson	L15180		Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	Yes	Yes	Yes	Yes	It is not possible to access other menu once Print feature is blocked in Access Definition
Epson	ET-16680		Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	Yes	Yes	Yes	Yes	It is not possible to access other menu once Print feature is blocked in Access Definition
Epson	WF-C5890		Yes	No	Yes	Yes	No	No		No	No	No		No	Yes	No	No	Yes	Yes	Yes	Yes	It is not possible to access other menu once Print feature is blocked in Access Definition
Epson	WF-M20590		Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	Yes	Yes	Yes	Yes	It is not possible to access other menu once Print feature is blocked in Access Definition
Epson	WF-M21000		Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	Yes	Yes	Yes	Yes	It is not possible to access other menu once Print feature is blocked in Access Definition
Epson	WF-C20750		Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	Yes	Yes	Yes	Yes	It is not possible to access other menu once Print feature is blocked in Access Definition
Epson	WF-C20600		Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	Yes	Yes	Yes	Yes	It is not possible to access other menu once Print feature is blocked in Access Definition
Epson	WF-C21000		Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	Yes	Yes	Yes	Yes	It is not possible to access other menu once Print feature is blocked in Access Definition
Epson	AM-C4000		Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	Yes	Yes	Yes	Yes	It is not possible to access other menu once Print feature is blocked in Access Definition
Epson	AM-C5000		Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	Yes	Yes	Yes	Yes	It is not possible to access other menu once Print feature is blocked in Access Definition
Epson	AM-C6000		Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	Yes	Yes	Yes	Yes	It is not possible to access other menu once Print feature is blocked in Access Definition
FUJIFILM BI	ApeosPrint C3060 S	ApeosPrint	No	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	No
FUJIFILM BI	ApeosPrint C3560 S	ApeosPrint	No	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device ApeosPrint C3560S, ApeosPrint C3060 S This model supports only Apeos IntegrationPlus 7(AIP7). General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI (Maintained) : t supported. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Printing The models supports only ART EX ( with optional PS3 - ApeosPrint C3560S only) Payment System After authentication, it can take 20 ~ 30 before a user lands on the home.(To be investigated)
FUJIFILM BI	Revoria Press SC170	Revoria Press	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device Press SC180, Revoria Press SC170 ESS: 1.0.1 General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI (Maintained) : t supported. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Payment System Login speed improvement with Payment System is planned for build 77 If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Revoria Press SC180	Revoria Press	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device Press SC180, Revoria Press SC170 ESS: 1.0.1 General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI (Maintained) : t supported. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Payment System Login speed improvement with Payment System is planned for build 77 If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
HP	Color LaserJet E78625	GEMSTONE 2.0	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also known as HP Color LaserJet Managed MFP E786dn - Also fits for Flow version Color LaserJet Flow E878625 or Color LaserJet Managed Flow MFP E786z
HP	Color LaserJet E87740	GEMSTONE 2.0	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	Yes	Yes	Yes	No	- t tested - Embedded terminal should works based on used technology - GEM 2.0 devices. - Also known as HP Color LaserJet Managed MFP E877dn - Also fits for Flow version Color LaserJet Flow E87740 or HP Color LaserJet Managed Flow MFP E877z
Toshiba	e-STUDIO338CS	e-STUDIO	Yes	No	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	The model is OEM of Lexmark cx 522ade Same prerequisites and limitations for Lexmark Embedded Terminal apply. Tested FW version: CXT2J.076.082
FUJIFILM BI	Apeos 5330	Apeos	Yes	No	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI (Maintained) : t supported. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Printing Japan model does not support PCL Payment System Login speed improvement with Payment System is planned for build 77 If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C3530	Apeos	Yes	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI (Maintained) : t supported. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Printing Japan model does not support PCL Payment System Login speed improvement with Payment System is planned for build 77 If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C4030	Apeos	Yes	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI (Maintained) : t supported. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Printing Japan model does not support PCL Payment System Login speed improvement with Payment System is planned for build 77 If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	ApeosPrint 4830	ApeosPrint	No	No	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device Apeos C4430 This model supports only Apeos IntegrationPlus 7(AIP7). System: 22.10.21 Controller ROM: 1.20.5 IOT ROM: 16.0.0 IOT2 ROM: 16.0.0 Panel ROM: 1.0.4 SJFI: 6.1.0 SSMI: 3.3.0 Contents: 6.11.3 Plugin: 6.11.2 Plugin platform: 3.1.0 General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI (Maintained) : t supported. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Payment System After authentication, it can take 20 ~ 30 before a user lands on the home.(To be investigated)
FUJIFILM BI	ApeosPrint C3530	ApeosPrint	No	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device Apeos C4430 This model supports only Apeos IntegrationPlus 7(AIP7). System: 22.10.21 Controller ROM: 1.20.5 IOT ROM: 16.0.0 IOT2 ROM: 16.0.0 Panel ROM: 1.0.4 SJFI: 6.1.0 SSMI: 3.3.0 Contents: 6.11.3 Plugin: 6.11.2 Plugin platform: 3.1.0 General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI (Maintained) : t supported. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Printing Japan model does not support PCL Payment System After authentication, it can take 20 ~ 30 before a user lands on the home.(To be investigated)
FUJIFILM BI	ApeosPrint C4030	ApeosPrint	No	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device Apeos C4430 This model supports only Apeos IntegrationPlus 7(AIP7). System: 22.10.21 Controller ROM: 1.20.5 IOT ROM: 16.0.0 IOT2 ROM: 16.0.0 Panel ROM: 1.0.4 SJFI: 6.1.0 SSMI: 3.3.0 Contents: 6.11.3 Plugin: 6.11.2 Plugin platform: 3.1.0 General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI (Maintained) : t supported. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Printing Japan models support ART EX only with PS3 as optional addon. Payment System After authentication, it can take 20 ~ 30 before a user lands on the home.(To be investigated)
FUJIFILM BI	ApeosPrint 3360 S	ApeosPrint	No	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	The model does not support Embedded Terminal technology LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages.
FUJIFILM BI	ApeosPrint 3960 S	ApeosPrint	No	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	The model does not support Embedded Terminal technology LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages.
FUJIFILM BI	ApeosPrint 4560 S	ApeosPrint	No	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	The model does not support Embedded Terminal technology LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages.
Fuji Xerox	ApeosPort-VII P4022 JM	ApeosPort-VII	No	No	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	No	Information about the tested device(AIP6) ApeosPort Print　C4570 System: 20.6.17 Controller ROM: 1.5.3 IOT ROM: 72.6.0 Panel ROM: 240.109.18 Boot ROM: 1.0.80 SJFI: 5.0.0 SSMI: 2.104.0 Contents: 4.9.5 Plugin: 4.9.3 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII 5022	ApeosPort-VII	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort Print　C4570 System: 20.6.17 Controller ROM: 1.5.3 IOT ROM: 72.6.0 Panel ROM: 240.109.18 Boot ROM: 1.0.80 SJFI: 5.0.0 SSMI: 2.104.0 Contents: 4.9.5 Plugin: 4.9.3 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C2570	Apeos	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos 5580	Apeos	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device Apeos 5580 This model supports only Apeos IntegrationPlus 7(AIP7). System: 22.6.10 Controller ROM: 1.0.7 IOT ROM: 56.7.0 SJFI: 6.1.0 SSMI: 3.2.0 Contents: 5.15.30 Plugin: 5.15.30 General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI (Maintained) : t supported. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Printing Japan model does not support PCL Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos 6580	Apeos	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device Apeos 5580 This model supports only Apeos IntegrationPlus 7(AIP7). System: 22.6.10 Controller ROM: 1.0.7 IOT ROM: 56.7.0 SJFI: 6.1.0 SSMI: 3.2.0 Contents: 5.15.30 Plugin: 5.15.30 General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI (Maintained) : t supported. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Printing Japan model does not support PCL Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos 7580	Apeos	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device Apeos 5580 This model supports only Apeos IntegrationPlus 7(AIP7). System: 22.6.10 Controller ROM: 1.0.7 IOT ROM: 56.7.0 SJFI: 6.1.0 SSMI: 3.2.0 Contents: 5.15.30 Plugin: 5.15.30 General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI (Maintained) : t supported. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Printing Japan model does not support PCL Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Olivetti	d-Color MF25		Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		No	No	No	No	No	No	No	No
Konica Minolta	AccurioPrint 2100		Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	Yes	Yes	No	Yes	Simplex PostScrips jobs are detected as duplex.
FUJIFILM BI	ApeosPrint C4570	ApeosPrint	No	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device ApeosPrint C5570 System: 22.6.10 Controller ROM: 1.0.7 IOT ROM: 56.7.0 Panel ROM: 0.0.2 SJFI: 6.1.0 SSMI: 3.2.0 Contents: 5.15.30 Plugin: 5.15.30 General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	ApeosPrint C5570	ApeosPrint	No	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device ApeosPrint C5570 System: 22.6.10 Controller ROM: 1.0.7 IOT ROM: 56.7.0 Panel ROM: 0.0.2 SJFI: 6.1.0 SSMI: 3.2.0 Contents: 5.15.30 Plugin: 5.15.30 General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Sharp	BP-70M90	CR5	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-70M75	CR5	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-50M65	CR5	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-50M55	CR5	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-50M45	CR5	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-50M36	CR5	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-50M31	CR5	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-50M26	CR5	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-55C26	CR5	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-50C65	CR5	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-50C55	CR5	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-50C45	CR5	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-50C36	CR5	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-50C31	CR5	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	Yes	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-50C26	CR5	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-70C65	CR5	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-70C55	CR5	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-70C45	CR5	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-70C36	CR5	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-70C31	CR5	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-60C45	CR5	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-60C31	CR5	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
Sharp	BP-60C36	CR5	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	There is a limitation that Sharp devices are not able to stop on zero when copying. It is necessary to manually cancel the job on the device.
HP	E78228dn		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	YSoft SafeQ 5 MU39 and later recommended YSoft SafeQ 6 MU19 and MU20 required EAP license FW bundle version 4.6.0.1 and later required for USB readers
Toshiba	e-STUDIO 478s		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 6528A	e-STUDIO	Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	No	No	Yes	Yes	Tested Controller ROM version TS20SD0W1720C General Job owner to be captured for accounting, "Confidentiality Setting" >> "Log Data Privacy Setting" >> Value "STORE" shall be configured. SafeQ5 For browser authentication, YSQL5-082-0000 is required and supported only with SDK 3.1 support. SafeQ6 When billing code is assigned to the user, login attempt by the 2nd user cannot logout the previously logged in user(1st user). 2nd user is logged out on selecting a billing code and needs to login once again.(Under RnD investigation)
Toshiba	e-STUDIO 5528A	e-STUDIO	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 4528A	e-STUDIO	Yes	Yes	No	Yes	No	No		No	No	No		No	Yes	No	No	No	No	Yes	Yes	Tested Controller ROM version TS20SD0W1720C General Job owner to be captured for accounting, "Confidentiality Setting" >> "Log Data Privacy Setting" >> Value "STORE" shall be configured. SafeQ5 For browser authentication, YSQL5-082-0000 is required and supported only with SDK 3.1 support. SafeQ6 When billing code is assigned to the user, login attempt by the 2nd user cannot logout the previously logged in user(1st user). 2nd user is logged out on selecting a billing code and needs to login once again.(Under RnD investigation)
Toshiba	e-STUDIO 3028A		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 2528A	e-STUDIO	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 2020AC		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 3025AC	e-STUDIO	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	Yes	Yes	Toshiba e-Studio 4525AC was tested with FW ver TS20SD0W1720 Job owner to be captured for accounting, "Confidentiality Setting" >> "Log Data Privacy Setting" >> Value "STORE" shall be configured. Browser based authentication that is compatible with SDK3.1 is not supported.
Toshiba	e-STUDIO 2520AC	e-STUDIO	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	Yes	Yes	Toshiba e-Studio 2520AC was tested with FW ver TS20SD0W1720 Job owner to be captured for accounting, "Confidentiality Setting" >> "Log Data Privacy Setting" >> Value "STORE" shall be configured.
Xerox	VersaLink C7130	VersaLink	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
Xerox	VersaLink C7125	VersaLink	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
Xerox	VersaLink C7120	VersaLink	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
Xerox	VersaLink B7135	VersaLink	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
Xerox	VersaLink B7130	VersaLink	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
Xerox	VersaLink B7125	VersaLink	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
Toshiba	e-STUDIO 6525AC	e-STUDIO	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	Yes	Yes	Toshiba e-Studio 6525AC was tested with FW ver TS20SD0W1721 Job owner to be captured for accounting, "Confidentiality Setting" >> "Log Data Privacy Setting" >> Value "STORE" shall be configured.
Toshiba	e-STUDIO 5525AC	e-STUDIO	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	Yes	Yes	Toshiba e-Studio 6525AC was tested with FW ver TS20SD0W1721 Job owner to be captured for accounting, "Confidentiality Setting" >> "Log Data Privacy Setting" >> Value "STORE" shall be configured. Browser based authentication that is compatible with SDK3.1 is not supported.
Toshiba	e-STUDIO 4525AC	e-STUDIO	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	Yes	Yes	Toshiba e-Studio 4525AC was tested with FW ver TS20SD0W1720 Job owner to be captured for accounting, "Confidentiality Setting" >> "Log Data Privacy Setting" >> Value "STORE" shall be configured. Browser based authentication that is compatible with SDK3.1 is not supported.
Toshiba	e-STUDIO 3525AC	e-STUDIO	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	Yes	Yes	Toshiba e-Studio 4525AC was tested with FW ver TS20SD0W1720 Job owner to be captured for accounting, "Confidentiality Setting" >> "Log Data Privacy Setting" >> Value "STORE" shall be configured. Browser based authentication that is compatible with SDK3.1 is not supported.
Toshiba	e-STUDIO 2525AC	e-STUDIO	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	Yes	Yes	Toshiba e-Studio 4525AC was tested with FW ver TS20SD0W1720 Job owner to be captured for accounting, "Confidentiality Setting" >> "Log Data Privacy Setting" >> Value "STORE" shall be configured. Browser based authentication that is compatible with SDK3.1 is not supported.
FUJIFILM BI	Apeos 1860	Apeos	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3060 System: 21.10.26 Controller ROM: 1.0.5 SJFI: 6.0.1 SSMI: 3.1.0 Contents: 5.5.25 Plugin: 5.5.24 Information about the tested device (AIP7) t yet tested Genera TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C2360	Apeos	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3060 System: 21.10.26 Controller ROM: 1.0.5 SJFI: 6.0.1 SSMI: 3.1.0 Contents: 5.5.25 Plugin: 5.5.24 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos 3570	Apeos	Yes	Yes	No	Yes	No	No		Yes	No	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device (AIP6) This model is certified based on Apeos C3570, C6580, ApeosPro C650 Apeos C3570 Apeos C6580 ApeosPro C650 System: 21.3.30 Controller ROM: 1.0.20 SJFI: 6.0.0 SSMI: 3.0.0 Contents: 5.0.7 Plugin: 5.0.8 System: 21.3.30 Controller ROM: 1.0.20 SJFI: 6.0.0 SSMI: 3.0.0 Contents: 5.1.7 Plugin: 5.1.8 System: 21.6.10 Controller ROM: 1.0.24 SJFI: 6.0.1 SSMI: 3.0.0 Contents: 5.2.10 Plugin: 5.2.11 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	ApeosPrint C5240	ApeosPrint	No	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) ApeosPrint C5240 System: 21.11.29 Controller ROM: 1.0.6 SJFI: 6.0.1 SSMI: 3.1.0 Contents: 5.8.25 Plugin: 5.8.23 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	ApeosPrint 6340	ApeosPrint	No	No	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	Yes	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3060 ApeosPrint C5240 System: 21.10.26 Controller ROM: 1.0.5 SJFI: 6.0.1 SSMI: 3.1.0 Contents: 5.5.25 Plugin: 5.5.24 System: 21.11.29 Controller ROM: 1.0.6 SJFI: 6.0.1 SSMI: 3.1.0 Contents: 5.8.25 Plugin: 5.8.23 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos 6340	Apeos	Yes	No	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3060 ApeosPrint C5240 System: 21.10.26 Controller ROM: 1.0.5 SJFI: 6.0.1 SSMI: 3.1.0 Contents: 5.5.25 Plugin: 5.5.24 System: 21.11.29 Controller ROM: 1.0.6 SJFI: 6.0.1 SSMI: 3.1.0 Contents: 5.8.25 Plugin: 5.8.23 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C5240	Apeos	Yes	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3060 ApeosPrint C5240 System: 21.10.26 Controller ROM: 1.0.5 SJFI: 6.0.1 SSMI: 3.1.0 Contents: 5.5.25 Plugin: 5.5.24 System: 21.11.29 Controller ROM: 1.0.6 SJFI: 6.0.1 SSMI: 3.1.0 Contents: 5.8.25 Plugin: 5.8.23 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos 2560	Apeos	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3060 System: 21.10.26 Controller ROM: 1.0.5 SJFI: 6.0.1 SSMI: 3.1.0 Contents: 5.5.25 Plugin: 5.5.24 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos 3060	Apeos	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3060 System: 21.10.26 Controller ROM: 1.0.5 SJFI: 6.0.1 SSMI: 3.1.0 Contents: 5.5.25 Plugin: 5.5.24 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos 3560	Apeos	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3060 System: 21.10.26 Controller ROM: 1.0.5 SJFI: 6.0.1 SSMI: 3.1.0 Contents: 5.5.25 Plugin: 5.5.24 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C2060	Apeos	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3060 System: 21.10.26 Controller ROM: 1.0.5 SJFI: 6.0.1 SSMI: 3.1.0 Contents: 5.5.25 Plugin: 5.5.24 Information about the tested device(AIP6) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C2560	Apeos	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3060 System: 21.10.26 Controller ROM: 1.0.5 SJFI: 6.0.1 SSMI: 3.1.0 Contents: 5.5.25 Plugin: 5.5.24 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C3060	Apeos	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3060 System: 21.10.26 Controller ROM: 1.0.5 SJFI: 6.0.1 SSMI: 3.1.0 Contents: 5.5.25 Plugin: 5.5.24 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
HP	LaserJet Enterprise MFP M480		Yes	No	Yes	Yes	No	No		No	No	No		Yes	No	No	No	No	No	No	Yes	IPP Accounting available with limitation LIMIT-177. Does not support Y Soft USB Card Readers due to bug in device. See following link for more information or contact HP: https://jetadvantage.zendesk.com/hc/en-us/community/posts/4411066461587-USB-Card-Reader-not-working
HP	LaserJet MFP E47528		Yes	No	Yes	Yes	No	No		No	No	No		Yes	No	No	No	No	No	No	Yes	IPP Accounting available with limitation LIMIT-177. Does not support Y Soft USB Card Readers due to bug in device. See following link for more information or contact HP: https://jetadvantage.zendesk.com/hc/en-us/community/posts/4411066461587-USB-Card-Reader-not-working
HP	LaserJet Enterprise MFP M430		Yes	No	No	Yes	No	No		No	No	No		Yes	No	No	No	No	No	No	Yes	IPP Accounting available with limitation LIMIT-177. Does not support Y Soft USB Card Readers due to bug in device. See following link for more information or contact HP: https://jetadvantage.zendesk.com/hc/en-us/community/posts/4411066461587-USB-Card-Reader-not-working
Konica Minolta	AccurioPress C7090	AccurioPress	Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	Yes	No
FUJIFILM BI	Revoria Press E1100	Revoria Press	Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) This model is certified based on Apeos C3570, C6580, ApeosPro C650 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Revoria Press E1110	Revoria Press	Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) This model is certified based on Apeos C3570, C6580, ApeosPro C650 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Revoria Press E1125	Revoria Press	Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) This model is certified based on Apeos C3570, C6580, ApeosPro C650 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Revoria Press E1136	Revoria Press	Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) This model is certified based on Apeos C3570, C6580, ApeosPro C650 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos 4570	Apeos	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device (AIP6) This model is certified based on Apeos C3570, C6580, ApeosPro C650 Apeos C3570 Apeos C6580 ApeosPro C650 System: 21.3.30 Controller ROM: 1.0.20 SJFI: 6.0.0 SSMI: 3.0.0 Contents: 5.0.7 Plugin: 5.0.8 System: 21.3.30 Controller ROM: 1.0.20 SJFI: 6.0.0 SSMI: 3.0.0 Contents: 5.1.7 Plugin: 5.1.8 System: 21.6.10 Controller ROM: 1.0.24 SJFI: 6.0.1 SSMI: 3.0.0 Contents: 5.2.10 Plugin: 5.2.11 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos 5570	Apeos	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device (AIP6) This model is certified based on Apeos C3570, C6580, ApeosPro C650 Apeos C3570 Apeos C6580 ApeosPro C650 System: 21.3.30 Controller ROM: 1.0.20 SJFI: 6.0.0 SSMI: 3.0.0 Contents: 5.0.7 Plugin: 5.0.8 System: 21.3.30 Controller ROM: 1.0.20 SJFI: 6.0.0 SSMI: 3.0.0 Contents: 5.1.7 Plugin: 5.1.8 System: 21.6.10 Controller ROM: 1.0.24 SJFI: 6.0.1 SSMI: 3.0.0 Contents: 5.2.10 Plugin: 5.2.11 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	ApeosPro C650	ApeosPro	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) ApeosPro C650 System: 21.6.10 Controller ROM: 1.0.24 SJFI: 6.0.1 SSMI: 3.0.0 Contents: 5.2.10 Plugin: 5.2.11 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	ApeosPro C750	ApeosPro	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) ApeosPro C650 System: 21.6.10 Controller ROM: 1.0.24 SJFI: 6.0.1 SSMI: 3.0.0 Contents: 5.2.10 Plugin: 5.2.11 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	ApeosPro C810	ApeosPro	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) ApeosPro C650 System: 21.6.10 Controller ROM: 1.0.24 SJFI: 6.0.1 SSMI: 3.0.0 Contents: 5.2.10 Plugin: 5.2.11 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C3070	Apeos	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3570 System: 21.3.30 Controller ROM: 1.0.20 SJFI: 6.0.0 SSMI: 3.0.0 Contents: 5.0.7 Plugin: 5.0.8 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C3570	Apeos	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3570 System: 21.3.30 Controller ROM: 1.0.20 SJFI: 6.0.0 SSMI: 3.0.0 Contents: 5.0.7 Plugin: 5.0.8 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C4570	Apeos	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3570 System: 21.3.30 Controller ROM: 1.0.20 SJFI: 6.0.0 SSMI: 3.0.0 Contents: 5.0.7 Plugin: 5.0.8 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Printing Japan model does not support PCL Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C5570	Apeos	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3570 System: 21.3.30 Controller ROM: 1.0.20 SJFI: 6.0.0 SSMI: 3.0.0 Contents: 5.0.7 Plugin: 5.0.8 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Printing Japan model does not support PCL Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C6570	Apeos	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3570 System: 21.3.30 Controller ROM: 1.0.20 SJFI: 6.0.0 SSMI: 3.0.0 Contents: 5.0.7 Plugin: 5.0.8 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C7070	Apeos	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C3570 System: 21.3.30 Controller ROM: 1.0.20 SJFI: 6.0.0 SSMI: 3.0.0 Contents: 5.0.7 Plugin: 5.0.8 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. LIMIT-177 Online accounting via IPP may incorrectly account jobs with duplex and blank pages. Printing Japan model does not support PCL Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C7580	Apeos	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C6580 System: 21.3.30 Controller ROM: 1.0.20 SJFI: 6.0.0 SSMI: 3.0.0 Contents: 5.1.7 Plugin: 5.1.8 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C8180	Apeos	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C6580 System: 21.3.30 Controller ROM: 1.0.20 SJFI: 6.0.0 SSMI: 3.0.0 Contents: 5.1.7 Plugin: 5.1.8 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
FUJIFILM BI	Apeos C6580	Apeos	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device(AIP6) Apeos C6580 System: 21.3.30 Controller ROM: 1.0.20 SJFI: 6.0.0 SSMI: 3.0.0 Contents: 5.1.7 Plugin: 5.1.8 Information about the tested device (AIP7) t yet tested General SafeQ5 t supported SafeQ6 TE using AIP6 - FUJIFILM BI : Supported from build 63 and newer. Global model does not support this option. TE using AIP6 - FUJIFILM BI (Maintained) : Supported from build 76 and newer. Should choose FUJIFILM BI(Maintained) when installing Terminal Embedded. Global model does not support this option. TE using AIP7 - FUJIFILM BI (Active) : Supported from build 76 and newer. Should choose FUJIFILM BI (Active) when installing Terminal Embedded. Installation Global model Make sure to select FUJIFILM BI (Active) for installation. thing needs to be changed about Web Browser application version. Global model does not have a configuration option to change Browser application version and it supports only v5 Web browser. APAC model TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Kyocera Mita	ECOSYS P3055dn		No	No	No	Yes	No	No		No	No	No		Yes	No	No	No	No	No	No	No	IPP Accounting available with limitation LIMIT-177
HP	LaserJet MFP E42540		Yes	No	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	IPP Accounting available with limitation LIMIT-177. Does not support Y Soft USB Card Readers due to bug in device. See following link for more information or contact HP: https://jetadvantage.zendesk.com/hc/en-us/community/posts/4411066461587-USB-Card-Reader-not-working
Fuji Xerox	Versant 170i Press	Versant	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device Versant 180i Press System: 20.4.3 Controller ROM: 1.1.2 SJFI: 3.6.1 SSMI: 1.22.23 Plugin: 4.7.2 General EPA interface is no longer supported by Fuji Xerox for the model, so EPA card reader is out of support. SafeQ 5 is not tested. Installation and uninstallation SafeQ6 XCP Terminal requires SafeQ6 MU29 or newer. Common Install XCP Terminal requires the manual steps bellow. Login to the device as System Administrator Go to “System” -> “Plug-in Settings” Toggle “Signature Verification when Adding/Updating” to disabled. Print job accounting requires following setting Copying For XCP terminal to restrict Full Color copy by SafeQ user Access Right, the setting bellow shall be applied to the device. Log in to the device as Administrator -> Device -> Authentication/Accounting -> Authentication/Security Settings -> Authentication -> Access Control -> Feature access -> Color Copying (change it to Locked) -> Press hardware Home button and reboot the device. Scanning Scan to 1/2 color using Scan workflow generates BW scan because 1/2 colors scan is not supported by the device. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	Versant 180i Press	Versant	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	Information about the tested device Versant 180i Press System: 20.4.3 Controller ROM: 1.1.2 SJFI: 3.6.1 SSMI: 1.22.23 Plugin: 4.7.2 General EPA interface is no longer supported by Fuji Xerox for the model, so EPA card reader is out of support. SafeQ 5 is not tested. Installation and uninstallation SafeQ6 XCP Terminal requires SafeQ6 MU29 or newer. Common Install XCP Terminal requires the manual steps bellow. Login to the device as System Administrator Go to “System” -> “Plug-in Settings” Toggle “Signature Verification when Adding/Updating” to disabled. Print job accounting requires following setting Copying For XCP terminal to restrict Full Color copy by SafeQ user Access Right, the setting bellow shall be applied to the device. Log in to the device as Administrator -> Device -> Authentication/Accounting -> Authentication/Security Settings -> Authentication -> Access Control -> Feature access -> Color Copying (change it to Locked) -> Press hardware Home button and reboot the device. Scanning Scan to 1/2 color using Scan workflow generates BW scan because 1/2 colors scan is not supported by the device. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode.
Fuji Xerox	ApeosPort C2560	ApeosPort	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII P5021	ApeosPort-VII	No	No	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort Print　C4570 System: 20.6.17 Controller ROM: 1.5.3 IOT ROM: 72.6.0 Panel ROM: 240.109.18 Boot ROM: 1.0.80 SJFI: 5.0.0 SSMI: 2.104.0 Contents: 4.9.5 Plugin: 4.9.3 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Konica Minolta	C4080	AccurioPrint, AccurioPress	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	Yes	- Payment System not yet tested. Please contact CSS for more information with reference to CSSHCLEMB-257. - USB reader not supported - contact KM for more details - Backend TCP/LPR not supported. IPP/IPPS backend supported - use IPP Queue name "http://CONTROLLER_IP/ipp" for print jobs to be delivered to controller for printing. - Basic and Advanced finishing options not supported. - Fiery not supported, Konica Minolta controller supported.
Konica Minolta	C4070	AccurioPrint, AccurioPress	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	Yes	- Payment System not yet tested. Please contact CSS for more information with reference to CSSHCLEMB-257. - USB reader not supported - contact KM for more details - Backend TCP/LPR not supported. IPP/IPPS backend supported - use IPP Queue name "http://CONTROLLER_IP/ipp" for print jobs to be delivered to controller for printing. - Basic and Advanced finishing options not supported. - Fiery not supported, Konica Minolta controller supported.
Konica Minolta	C4065	AccurioPrint, AccurioPress	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	Yes	- Payment System not yet tested. Please contact CSS for more information with reference to CSSHCLEMB-257. - USB reader not supported - contact KM for more details - Backend TCP/LPR not supported. IPP/IPPS backend supported - use IPP Queue name "http://CONTROLLER_IP/ipp" for print jobs to be delivered to controller for printing. - Basic and Advanced finishing options not supported. - Fiery not supported, Konica Minolta controller supported.
Ricoh	IM 6000		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Ricoh SOP Embedded terminal: - Java J/SDK not required
Ricoh	IM 5000		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Ricoh SOP Embedded terminal: - Java J/SDK not required
Ricoh	IM 4000		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Ricoh SOP Embedded terminal: - Java J/SDK not required
Ricoh	IM 3500		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Ricoh SOP Embedded terminal: - Java J/SDK not required
Ricoh	IM 3000		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Ricoh SOP Embedded terminal: - Java J/SDK not required
Ricoh	IM 2500		Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	Ricoh SOP Embedded terminal: - Java J/SDK not required
Ricoh	IM C530F/FB		Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Ricoh SOP Embedded terminal: - Java J/SDK not required
Sharp	MX-B467F		Yes	No	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Using Sharp-eSF Embedded terminal type available from YSoft SafeQ 6 Build 48.
Ricoh	Pro C5310s		Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	Yes	Ricoh SOP based terminal. YSoft SafeQ 6 Build 55 and newer recommended.
Ricoh	Pro C5300s		Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	Yes	Ricoh SOP based terminal. YSoft SafeQ 6 Build 55 and newer recommended.
Ricoh	P 801		No	No	No	Yes	No	No		No	No	No		No	No	No	Yes	No	No	No	No	LD device from YSoft SafeQ 6 Build 55
Ricoh	P 501		No	No	No	Yes	No	No		No	No	No		No	No	No	Yes	No	No	No	No	LD device from YSoft SafeQ 6 Build 55
Ricoh	P 502		No	No	No	Yes	No	No		No	No	No		No	No	No	Yes	No	No	No	No	LD device from YSoft SafeQ 6 Build 55
Develop	ineo 658e		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
Develop	ineo 558e		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
Develop	ineo 458e		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
Develop	ineo 308e		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Olivetti	d-Color MF559		Yes	Yes	Yes	Yes	No	No		Yes	No	No		Yes	Yes	No	No	No	No	Yes	Yes	SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Olivetti	d-Color MF459		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Olivetti	d-Color MF369		Yes	Yes	Yes	Yes	No	No		Yes	No	No		Yes	Yes	No	No	No	No	Yes	Yes	SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Olivetti	d-Color MF4003		Yes	No	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Common Limitations: MFD's new UI(Basic UI) mode has a bug in controlling access right for 1/2 colors copy. Despite no-access right for color, 1/2 colors copy can be initiated which however ends up in the error when the MFD tries to start copying. Classic UI does not have this issue.
Olivetti	d-Color MF25		Yes	No	Yes	Yes	No	No		Yes	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Common Limitations: MFD's new UI(Basic UI) mode has a bug in controlling access right for 1/2 colors copy. Despite no-access right for color, 1/2 colors copy can be initiated which however ends up in the error when the MFD tries to start copying. Classic UI does not have this issue.
Olivetti	d-Color P3302		No	No	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Device has limited OpenAPI - Application icon is not visible, can be added manually via web interface of the device. Minimum required firmware: GC1-73 Scan application is not supported.
Olivetti	d-Color MF754		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Olivetti	d-Color MF554		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Olivetti	d-Color MF654		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Olivetti	d-Color MF3300		Yes	No	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Olivetti	d-Color MF3800		Yes	No	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Olivetti	d-color MF759		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Olivetti	d-Color MF3302		Yes	No	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Common for SafeQ5 and SafeQ6(MFD limitation with the tested FW version) MFD's new UI(Basic UI) mode has a bug in controlling access right for 1/2 colors copy. Despite no-access right for color, 1/2 colors copy can be initiated which however ends up in the error when the MFD tries to start copying. This bug will be fixed by IT6v2.0 mass-production FW that is scheduled for release in early October. Classic UI does not have this issue. When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0 which are not enabled by default on the device. To use TLS1.1 or TLS1.2, set kmOpenApiVersion to 4-13a(default of SafeQ6). When using SafeQ6 Gen2 terminal, certificate validation shall be disabled in the MFD or the MFD loops the certificate validation message on the browser on logout attempt. Or the solution is to create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Termianl server default certificate does not have SAN value and cannot be trusted so the behavior above occurs. SafeQ5 (Native TE only) Auto logout by user defined timeout does not work. (Browser TE) Auto logout by user defined time out only logges out a user from the SQ application. A user needs to press MFD's logout button to logout. System Auto Reset shall be used instead for auto logout. Logout by card requires DIP SW value change. SafeQ6 (Native TE only) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) Certificate validation shall be disabled or the MFD loops showing certificate validation message and behaves strangely when trying to logout. Registering a certificate from the MFD's browser cannot register the cert. Uploading a cert from the administration web also does not solve this behavior Logout by card requires DIP SW value change.
Develop	ineo+ 3320i		Yes	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Common for SafeQ5 and SafeQ6(MFD limitation with the tested FW version) MFD's new UI(Basic UI) mode has a bug in controlling access right for 1/2 colors copy. Despite no-access right for color, 1/2 colors copy can be initiated which however ends up in the error when the MFD tries to start copying. This bug will be fixed by IT6v2.0 mass-production FW that is scheduled for release in early October. Classic UI does not have this issue. When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0 which are not enabled by default on the device. To use TLS1.1 or TLS1.2, set kmOpenApiVersion to 4-13a(default of SafeQ6). When using SafeQ6 Gen2 terminal, certificate validation shall be disabled in the MFD or the MFD loops the certificate validation message on the browser on logout attempt. Or the solution is to create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Termianl server default certificate does not have SAN value and cannot be trusted so the behavior above occurs. SafeQ5 (Native TE only) Auto logout by user defined timeout does not work. (Browser TE) Auto logout by user defined time out only logges out a user from the SQ application. A user needs to press MFD's logout button to logout. System Auto Reset shall be used instead for auto logout. Logout by card requires DIP SW value change. SafeQ6 (Native TE only) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) Certificate validation shall be disabled or the MFD loops showing certificate validation message and behaves strangely when trying to logout. Registering a certificate from the MFD's browser cannot register the cert. Uploading a cert from the administration web also does not solve this behavior Logout by card requires DIP SW value change.
Develop	ineo 4752		Yes	No	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
Develop	ineo 4052		Yes	No	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
HP	Color LaserJet Managed MFP E77422		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	YSoft SafeQ 5 MU39 and later recommended YSoft SafeQ 6 MU19 and MU20 required EAP license FW bundle version 4.6.0.1 and later required for USB readers
HP	LaserJet Managed MFP E72425		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	YSoft SafeQ 5 MU39 and later recommended YSoft SafeQ 6 MU19 and MU20 required EAP license FW bundle version 4.6.0.1 and later required for USB readers
HP	E78330	E783xx series	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	E78325	E783xx series	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	E78323	E783xx series	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	MP C6503		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Ricoh SOP Embedded terminal: - J/SDK is optional.
Ricoh	MP 6503		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Ricoh SOP Embedded terminal: - J/SDK is optional.
Ricoh	MP 7503		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Ricoh SOP Embedded terminal: - J/SDK is optional.
Ricoh	MP 9003		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Ricoh SOP Embedded terminal: - J/SDK is optional.
Ricoh	IM 600		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Ricoh Embedded terminal: - not supported Ricoh SOP Embedded terminal: - J/SDK not required
Ricoh	IM 550		Yes	No	No	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No	Ricoh Embedded terminal: - not supported Ricoh SOP Embedded terminal: - J/SDK not required
Ricoh	IM 2702		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Ricoh Embedded terminal: - not supported Ricoh SOP Embedded terminal: - J/SDK not required
Ricoh	IM C6500		Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	Yes	Ricoh Embedded Terminal J/SDK 12.x required not tested Ricoh SOP Embedded Terminal Tested FW version: 1.03(System/Copy), 1.03:02(Engine) SafeQ 6 build 46 to 48 requires the EAP license “YSQL6-083-0000”. General availability is from build 49. Web API token in Build 46 has only limited validity (2 months), after 2 months a new token with 2 years validity has to be obtained (or update to a newer Build has to be performed). Charging and quotas are not supported. J/SDK not required
Ricoh	IM C8000		Yes	Yes	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	Yes	Ricoh Embedded Terminal J/SDK 12.x required not tested Ricoh SOP Embedded Terminal Tested FW version: 1.03(System/Copy), 1.03:02(Engine) SafeQ 6 build 46 to 48 requires the EAP license “YSQL6-083-0000”. General availability is from build 49. Web API token in Build 46 has only limited validity (2 months), after 2 months a new token with 2 years validity has to be obtained (or update to a newer Build has to be performed). Charging and quotas are not supported. J/SDK not required
Sharp	BP-30C25		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Konica Minolta	AccurioPrint C750i	AccurioPrint	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Embedded terminal with EFI controller is not supported.
Develop	ineo+ 750i		Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
Lexmark	XM7355		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Sharp	MX-6070V		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
Sharp	MX-5070V		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
Sharp	MX-B707F		Yes	No	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Using Sharp-eSF Embedded terminal type available from YSoft SafeQ 6 Build 48.
Sharp	MX-B557F		Yes	No	No	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	No	Using Sharp-eSF Embedded terminal type available from YSoft SafeQ 6 Build 48.
Lexmark	XM7370		Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	XC8160		Yes	No	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No
Lexmark	CX860		Yes	No	Yes	Yes	No	No		No	No	No		No	Yes	No	No	No	No	No	No
Sharp	MX-C607F		Yes	No	Yes	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	No	Using Sharp-eSF Embedded terminal type available from YSoft SafeQ 6 Build 48.
Sharp	MX-C557F		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Using Sharp-eSF Embedded terminal type available from YSoft SafeQ 6 Build 48.
Sharp	MX-C507F		Yes	No	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Using Sharp-eSF Embedded terminal type available from YSoft SafeQ 6 Build 48.
Sharp	MX-C407F		Yes	No	Yes	No	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Using Sharp-eSF Embedded terminal type available from YSoft SafeQ 6 Build 48.
Sharp	MX-C357F		Yes	No	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Using Sharp-eSF Embedded terminal type available from YSoft SafeQ 6 Build 48.
Sharp	MX-M905		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Sharp	MX-7090		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	External controller not supported. Display resolution needs to be switched to Wide-XGA.
Sharp	MX-8090		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	External controller not supported. Display resolution needs to be switched to Wide-XGA.
Epson	WF-C879R		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	Epson Open Platform firware required for Embedded terminal.
Epson	WF-C878R		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	Epson Open Platform firware required for Embedded terminal.
Xerox	AltaLink C8170	AltaLink	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 Build 46 and later recommended. Xerox Firmware version 113.XXX.000.35300 and above is recommended.
Xerox	AltaLink C8155	AltaLink	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 Build 46 and later recommended. Xerox Firmware version 113.XXX.000.35300 and above is recommended.
Xerox	AltaLink C8145	AltaLink	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 Build 46 and later recommended. Xerox Firmware version 113.XXX.000.35300 and above is recommended.
Xerox	AltaLink C8135	AltaLink	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 Build 46 and later recommended. Xerox Firmware version 113.XXX.000.35300 and above is recommended.
Xerox	AltaLink C8130	AltaLink	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 Build 46 and later recommended. Xerox Firmware version 113.XXX.000.35300 and above is recommended.
Xerox	AltaLink B8170	AltaLink	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 Build 46 and later recommended. Xerox Firmware version 113.XXX.000.35300 and above is recommended.
Xerox	AltaLink B8155	AltaLink	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 Build 46 and later recommended. Xerox Firmware version 113.XXX.000.35300 and above is recommended.
Xerox	AltaLink B8145	AltaLink	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 Build 46 and later recommended. Xerox Firmware version 113.XXX.000.35300 and above is recommended.
Lexmark	XM5370		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	XM5365		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	XM9165		Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes
Lexmark	XM9155		Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes
Lexmark	XM9145		Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes
Sharp	MX-B356W		Yes	No	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Scan jobs are always rotated by 90°.
Sharp	MX-B456W		Yes	No	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Scan jobs are always rotated by 90°.
HP	LaserJet Pro M404		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-VII C3322	ApeosPort-VII	Yes	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII C4422	ApeosPort-VII	Yes	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort 1860	ApeosPort	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort C2360	ApeosPort	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort 3570	ApeosPort	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort 4570	ApeosPort	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort 5570	ApeosPort	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort C2570	ApeosPort	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 Information about the tested device(AIP7) t yet tested General SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 TE using AIP6(MU29 ~ MU75) - XCP Terminal requires SafeQ6 MU29 or newer. TE using AIP6(MU76 and newer) - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. TE using AIP7(MU76 and newer) - Should choose FUJIFILM BI (Active) when installing Terminal Embedded. TE using AIP7(MU76 and newer) - Requires latest FW that supoprts AIP7 loaded to MFP. Only XCP Platform version 2.2.0 and higher supported. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) TE using AIP6 - Make sure that the embedded browser version is set to v4. (Admin login > Apps > Web Browser Setup). TE using AIP7 - Make sure that the embedded browser version is set to v5. (Admin login > Apps > Web Browser Setup). Common If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstallation (FUJIFILM BI (Active) - TE using AIP7) After uninstallation, manually disabling Custom Authentication is required (current limitation). (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Authentication When installing a terminal with authentication method without card swipe (PIN, Username and password), disable and disconnect the card reader else authentication becomes slow. (Admin login > Permissions > Authentication/Accounting Settings > Advanced Settings > Use of IC Card : Off) Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Scan control by Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	P475 AP	DocuPrint	No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-VII P4022	ApeosPort-VII	No	No	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort Print　C4570 System: 20.6.17 Controller ROM: 1.5.3 IOT ROM: 72.6.0 Panel ROM: 240.109.18 Boot ROM: 1.0.80 SJFI: 5.0.0 SSMI: 2.104.0 Contents: 4.9.5 Plugin: 4.9.3 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort 2560	ApeosPort	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort 3060	ApeosPort	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort 3560	ApeosPort	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort C2060	ApeosPort	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort C3060	ApeosPort	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort C3070	ApeosPort	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort Ｃ3570	ApeosPort	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort C4570	ApeosPort	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort C5570	ApeosPort	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort C6570	ApeosPort	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort C7070	ApeosPort	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII 4021	ApeosPort-VII	Yes	No	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII 5021	ApeosPort-VII	Yes	No	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII C3321	ApeosPort-VII	Yes	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII C4421	ApeosPort-VII	Yes	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort C7070 System: 20.4.3 Controller ROM: 1.0.2 SJFI: 5.0.0 SSMI: 2.104.0 Plugin: 4.7.2 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Ricoh	MP CW2201		Yes	Yes	Yes	No	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Due device limitation only offline accounting can be used.
HP	M507dn		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Device does not have touch display - Embedded terminal is not supported.
HP	M507x		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	CX825		Yes	No	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes
Lexmark	MS521		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	LaserJet Managed MFP E62665		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	LaserJet Managed MFP E62655		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Develop	Ineo+ 650i		Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	firmware GC1-25 or newer recommended
Develop	ineo+ 550i		Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	firmware GC1-25 or newer recommended
Develop	Ineo+ 450i		Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	firmware GC1-75 or newer recommended
Xerox	C9070	PrimeLink	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Xerox	C9065	PrimeLink	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Ricoh	IM C400		Yes	No	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x required Ricoh SOP Embedded terminal: - Java J/SDK not required
Ricoh	IM C300		Yes	No	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x required Ricoh SOP Embedded terminal: - Java J/SDK not required
HP	M776		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes
HP	M528		Yes	No	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes
Sharp	MX-M6051		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Sharp	MX-M5051		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Sharp	MX-M4051		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Sharp	MX-M3551		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Sharp	MX-M3051		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Sharp	MX-M2651		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Lexmark	CX522		Yes	No	Yes	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	No
Sharp	MX-7580N		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card not supported.
Sharp	MX-6580N		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card not supported.
Sharp	MX-4051		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card not supported.
Sharp	MX-3551		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card not supported.
Sharp	MX-3051		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card not supported.
Sharp	MX-2651		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card not supported.
Lexmark	XM1242		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Limited solutions device - does not support Embedded terminal application.
Brother	ADS-3600W		No	No	No	No	No	No		No	No	No	Scanner Only	No	Yes	No	No	No	No	No	Yes	Single function scanner - SafeQ Print application is not supported. Firmware: P1907111512/M1512081018 and newer. YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Brother	ADS-2800W		No	No	No	No	No	No		No	No	No	Scanner only	No	Yes	No	No	No	No	No	Yes	Single function scanner - SafeQ Print application is not supported. Firmware: P1907111512/M1512081018 and newer. YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Sharp	MX-4061		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card not supported.
Sharp	MX-3561		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card not supported.
Sharp	MX-3061		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card not supported.
Epson	WF-M5799	WorkForce Pro	Yes	No	Yes	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	Epson Open Platform firware required for Embedded terminal.
HP	P77960	PageWide	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	Firmware bundle 4.8.1 and later required.
HP	P77950	PageWide	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	Firmware bundle 4.8.1 and later required.
HP	P77940	PageWide	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	Firmware bundle 4.8.1 and later required.
Fuji Xerox	ApeosPort-VII C5588	ApeosPort-VII	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VII C2273(APAC model): Controller ROM: 1.1.13 SJFI: 4.21.0 SSMI: 2.101.0 Plugin: 3.0.5 XCP: 2.1.0 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII C6688	ApeosPort-VII	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VII C2273(APAC model): Controller ROM: 1.1.13 SJFI: 4.21.0 SSMI: 2.101.0 Plugin: 3.0.5 XCP: 2.1.0 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII C7788	ApeosPort-VII	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VII C2273(APAC model): Controller ROM: 1.1.13 SJFI: 4.21.0 SSMI: 2.101.0 Plugin: 3.0.5 XCP: 2.1.0 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Sharp	MX-6071		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card not supported.
Sharp	MX-5071		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card not supported.
Sharp	MX-4071		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card not supported.
Sharp	MX-3571		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card not supported.
Sharp	MX-3071		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card not supported.
Sharp	MX-C304W		Yes	No	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card is not supported. Scan jobs are always rotated by 90°.
Sharp	MX-C303W		Yes	No	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 6 Build 37 and later recommended YSoft SafeQ 5 MU72 and later recommended Logout by card is not supported. Scan jobs are always rotated by 90°.
Lexmark	XM1246		Yes	No	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes
Lexmark	CX924	CX920	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes
Lexmark	CX923	CX920	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes
Lexmark	CX922	CX920	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes
Lexmark	CX921	CX920	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes
Lexmark	XC9265	CX920	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes
Lexmark	XC9255	CX920	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes
Lexmark	XC9245	CX920	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes
Lexmark	XC9235	CX920	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes
Lexmark	XC4240		Yes	No	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	firmware FW5.3.23 and later recommended
Lexmark	CX622		Yes	No	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	firmware FW5.3.23 and later recommended
Lexmark	CX625		Yes	No	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	firmware FW5.3.23 and later recommended
HP	HP LaserJet Managed E60155dn		No	No	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	Printer only, Scan application not supported. Firmware bundle 4.6.0.1 and later required for USB reader support. 4.3 inch display required.
Konica Minolta	Workplace Hub	Workplace Hub	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		No	Yes	No	No	No	No	Yes	Yes	Tested Workplace Hub FW version Workplace Hub Firmware version: 1.9 Workplace Hub general limitation AuthenticationCache is not supported KioskMode is not supported MyPanel is not supported: Shortcut configuration by SafeQ is not supported. TLS1.1/TLS1.2 only are supported Logout by card is not supported Change to the panel (e.g Enabling/Disabling Workplace Hub internal PublicUser, Uninstall/Reinstall auth application) may not propagate the change to the panel display immediately until the display is refreshed. A Workplace Hub user can have 1 card only: SafeQ user can have multiple card, but because Workplace Hub can have only 1 card. If a different card shall be registered, existing card shall be removed from a user in Workplace Hub. For 1st time login by PIN, Username/Password, a user shall link them with Workplace Hub internal user by entering user name and password. If Embedded Terminal is reinstalled, this needs to be done again. For 1st time login by card, a user shall link them with Workplace Hub internal user by entering user name and password. Workplace Hub SW Keybord does not support Japanese. MFD setup before Terminal installation (SafeQ5 GEN1/SafeQ6 GEN2) When using Browser Terminal, it is recommended to disable Certificate Validation by MFD if Workplace Hub. This can be done by accessing to Page Scope Web Connection at https://[machine IP address]/wcd/top.xml and navigate to "Security -> Certificate Verification Settings". Authentication (SafeQ6 GEN2) Pressing key board “return key” does not action login for the authentication method “Username/Password”. (GEN2 Terminal defect - fix TBA) (SafeQ5 Native/GEN1, SafeQ6 Native) Pressing key board “return key” does not action login for the authentication method “PIN”, “Username/Password”. (To be confirmed as specification by Konica MInolta) To logout from Workplace Hub, a user shall navigate back to the Workplace Hub home menu and tap “logout”. Unlike bizhub model, there is no hardware logout button. (SafeQ5 Native/SafeQ6 Native) SafeQ user defined timeout is not supported. Use system auto reset timer of the MFD instead. (SafeQ5 GEN1/SafeQ6 GEN2) SafeQ user defined timeout only terminates SafeQ print/scan applications. Interface Unlike bizhub, user cannot change user language before login. User can change own language after login. MFD default language can only be changed by Workplace Hub administrator. (SafeQ5 Native/GEN1, SafeQ6 Native) Unlike bizhub models, user cannot change SafeQ application(authentication, print, scan interface) language before login. Also changing SafeQ application interface language is not supported by FW v1.9(Improvement is planned for FW v2.0) Print (SafeQ6 GEN2) Print All does not work if any Workplace Hub is integrated with the AD and any user is not assigned with e-mail address. (Improvement by Konica Minolta TBD) Scan (SafeQ5 GEN1/SafeQ6 GEN2) Attempting to scan to “JPEG in BW” using SafeQ Scan Workflow does not start scanning because it is unsupported combination by Workplace Hub Payment System Payment System integration is not certified yet for Workplace Hub because of the first limitation bellow. Workplace Hub tries to authenticate the print job 2 times due to which the print is deleted as error if a job owner’s balance is less than double of the print job’s price. (Improvement is planned for FW v2.0) If the user presses “logout” on consuming all the balance and logout from Workplace Hub, “Access Denied. Insufficient permissions. Please Contact your Workplace Hub Admin” message is displayed if Workplace Hub internal Public User is not enabled (Improvement in later FW version TBD) Other (Improvement in later FW version TBD) If the user attempts to run SafeQ print/scan application while they are still running, application loading spinner is displayed for a long time. This may happen in following situations: The user pressed "home" button and attempts to enter SafeQ print application while printing is ongoing. The user pressed "home" button and attempts to enter SafeQ scan application while scanning is ongoing. The user pressed "home" button and quickly attempts to enter SafeQ print/scan application while they are still up.
Ricoh	MP C501		Yes	No	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Brother	MFC-L6970DW		Yes	No	No	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Brother	MFC-L9577CDW		Yes	No	Yes	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
HP	LaserJet Managed E52645		Yes	No	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	- YSoft SafeQ 6 MU19 and MU20 require EAP license. - FW bundle version 4.6.0.1 and later required for USB readers. - After Embedded Terminal installation print application should be hidden from the device web.
Brother	MFC-8540DN		Yes	No	No	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP. Brother Enhanced PCL driver recommended.
HP	Color LaserJet M682		Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	Color LaserJet M681		Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	LaserJet Managed E50145dn		No	No	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	* FW bundle version 4.6.0.1 and later required for USB readers
Brother	HL-J6100DW		No	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 and newer Requires EAP license Brother Enhanced PCL driver recommended.
Brother	HL-J6000DW		No	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP. Brother Enhanced PCL driver recommended.
Brother	MFC-J5945DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP. Brother Enhanced PCL driver recommended.
Brother	MFC-J6945DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP. Brother Enhanced PCL driver recommended.
Brother	HL-L8360CDW		No	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	Tested model FW: Main Firmware Version: 1.34 Sub1 Firmware Version: 1.14 Supported from MU27 with EAP license YSQL6-047-0000. Build 34 Summer 2019 and newer does not require EAP license YSQL6-047-0000. Rule Base Engine limitations RBE action "Watermark" work only with YSF Universal Print Driver or Brother Enhanced Generic PCL Driver on the model. RBE action "Duplex" work only with YSF Universal Print Driver or Brother Enhanced Generic PCL Driver on the model RBE action “Number of Copies” causes infinite print on the model on the model.
Brother	DCP-L6600DW		Yes	No	No	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 and newer Requires EAP license
Brother	MFC-L5750		Yes	No	No	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP. Requires EAP license
Brother	MFC-L6800DW		Yes	No	No	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Brother	MFC-L6000DW		Yes	No	No	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Brother	MFC-L6950DW		Yes	No	No	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Brother	MFC-L9670DW		Yes	No	No	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Brother	HL-L6300DW/T		No	No	No	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Brother	HL-L6400DW/T		No	No	No	Yes	No	No		No	No	Yes		No	Yes	No	Yes	No	No	No	Yes	“/T” of HL-L6400DW/T stands for the Tower Tray. Tested model FW: Main Firmware Version: 1.80 Sub1 Firmware Version: 1.53 Supported from MU27 with EAP license YSQL6-047-0000. Build 34 Summer 2019 and newer does not require EAP license YSQL6-047-0000. Rule Base Engine limitations RBE action "Watermark" work only with YSF Universal Print Driver or Brother Enhanced Generic PCL Driver on the model. RBE action "Duplex" work only with YSF Universal Print Driver or Brother Enhanced Generic PCL Driver on the model RBE action “Number of Copies” causes infinite print on the model on the model.
Brother	HL-L6450DN		No	No	No	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Brother	MFC-L8690CDW		Yes	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP. Firmware from April 2019 and later required.
Brother	MFC-L8900CDW		Yes	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Fuji Xerox	C9070	PrimeLink	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device PrimeLink C9065: Controller ROM: 1.0.11 SJFI: 4.20.0 SSMI: 2.100.0 Plugin: 2.4.2 General SafeQ5 XCP Terminal requires FW version supporting XCP 1.2+. SafeQ6 XCP Terminal (Generation 2) requires FW version supporting XCP1.4+. Common USB Card reader can be used in combination with XCP plugin terminal. EPA Card reader can be used in combination with native terminal with Authentication Agent. Installation and uninstallation SafeQ5 XCP Terminal not tested yet SafeQ6 XCP Terminal requires combination of SafeQ6 MU29 or newer. XCP Terminal uninstallation with FW1.1.101 requires the manual steps bellow. This will be solved with the next release firmware. For details, please contact Fuji Xerox. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Interface Common Billing code application footer "My billing codes for Copy, Scan and FAX" too long and cannot be displayed in full. Fix is planned in later MU. Print SafeQ6 Attempt to auto fix incompatible Duplex job to Simplex job does not release the print job. (“ showIncompatibleJobs=true” and the system tag “duplex unchecked”). Fix is planned in MU31 Scanning SafeQ5 Workflow scan does not support XDW format. SafeQ6 Workflow scan does not support XPS and XDW format. Common Scan to 1/2 color using Scan workflow generates BW scan because 1/2 colors scan is not supported by the device. Scan to JPEG and TIFF fails with the error 018-571. Under investigation by Fuji Xerox. Payment System (XCP plugin terminal) Stop on Zero with the Payment System does not work. Debts is registered. This will be solved with the next release FW. For details, please contact Fuji Xerox. When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	C9065	PrimeLink	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device PrimeLink C9065: Controller ROM: 1.0.11 SJFI: 4.20.0 SSMI: 2.100.0 Plugin: 2.4.2 General SafeQ5 XCP Terminal requires FW version supporting XCP 1.2+. SafeQ6 XCP Terminal (Generation 2) requires FW version supporting XCP1.4+. Common USB Card reader can be used in combination with XCP plugin terminal. EPA Card reader can be used in combination with native terminal with Authentication Agent. Installation and uninstallation SafeQ5 XCP Terminal not tested yet SafeQ6 XCP Terminal requires combination of SafeQ6 MU29 or newer. XCP Terminal uninstallation with FW1.1.101 requires the manual steps bellow. This will be solved with the next release firmware. For details, please contact Fuji Xerox. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Interface Common Billing code application footer "My billing codes for Copy, Scan and FAX" too long and cannot be displayed in full. Fix is planned in later MU. Print SafeQ6 Attempt to auto fix incompatible Duplex job to Simplex job does not release the print job. (“ showIncompatibleJobs=true” and the system tag “duplex unchecked”). Fix is planned in MU31 Scanning SafeQ5 Workflow scan does not support XDW format. SafeQ6 Workflow scan does not support XPS and XDW format. Common Scan to 1/2 color using Scan workflow generates BW scan because 1/2 colors scan is not supported by the device. Scan to JPEG and TIFF fails with the error 018-571. Under investigation by Fuji Xerox. Payment System (XCP plugin terminal) Stop on Zero with the Payment System does not work. Debts is registered. This will be solved with the next release FW. For details, please contact Fuji Xerox. When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
HP	LaserJet Managed E50045		No	No	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes
Fuji Xerox	ApeosPort-VII C5573	ApeosPort-VII	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VII C2273(APAC model): Controller ROM: 1.1.13 SJFI: 4.21.0 SSMI: 2.101.0 Plugin: 3.0.5 XCP: 2.1.0 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII C7773	ApeosPort-VII	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VII C2273(APAC model): Controller ROM: 1.1.13 SJFI: 4.21.0 SSMI: 2.101.0 Plugin: 3.0.5 XCP: 2.1.0 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII C6673	ApeosPort-VII	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VII C2273(APAC model): Controller ROM: 1.1.13 SJFI: 4.21.0 SSMI: 2.101.0 Plugin: 3.0.5 XCP: 2.1.0 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII C4473	ApeosPort-VII	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VII C2273(APAC model): Controller ROM: 1.1.13 SJFI: 4.21.0 SSMI: 2.101.0 Plugin: 3.0.5 XCP: 2.1.0 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII C3373	ApeosPort-VII	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VII C2273(APAC model): Controller ROM: 1.1.13 SJFI: 4.21.0 SSMI: 2.101.0 Plugin: 3.0.5 XCP: 2.1.0 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII C3372	ApeosPort-VII	Yes	Yes	Yes	No	No	No		Yes	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VII C2273(APAC model): Controller ROM: 1.1.13 SJFI: 4.21.0 SSMI: 2.101.0 Plugin: 3.0.5 XCP: 2.1.0 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII C2273	ApeosPort-VII	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Information about the tested device ApeosPort-VII C2273(APAC model): Controller ROM: 1.1.13 SJFI: 4.21.0 SSMI: 2.101.0 Plugin: 3.0.5 XCP: 2.1.0 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. SafeQ Cloud Only ApeosPort-VII Gen2 installed with AIP7 FW with XCP 2.0.0+ and EWB v5.x is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Sharp	MX-M6070N	B-PHOENIX	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Sharp	MX-M6050N	B-GRIFFIN	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Sharp	MX-M5050N	B-GRIFFIN	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Sharp	MX-M4070N	B-PHOENIX	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Sharp	MX-M4050N	B-GRIFFIN	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Sharp	MX-M3570N	B-PHOENIX	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Sharp	MX-M3550N	B-GRIFFIN	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Sharp	MX-M3070N	B-PHOENIX	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Sharp	MX-M3050N	B-GRIFFIN	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Ricoh	IM C2500		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x required Ricoh SOP Embedded terminal: - Java J/SDK not required
Ricoh	IM C2000		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x required Ricoh SOP Embedded terminal: - Java J/SDK not required
Ricoh	IM C6000		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x required Ricoh SOP Embedded terminal: - Java J/SDK not required
Ricoh	IM C5500		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x required Ricoh SOP Embedded terminal: - Java J/SDK not required
Ricoh	IM C4500		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x required Ricoh SOP Embedded terminal: - Java J/SDK not required
Ricoh	IM C3500		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x required Ricoh SOP Embedded terminal: - Java J/SDK not required
Ricoh	IM C3000		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x required Ricoh SOP Embedded terminal: - Java J/SDK not required
Lexmark	MX826		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	MX822		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	MX722		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	MX721		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	MX522		Yes	No	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes
Lexmark	MX521		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Limited solutions device - does not support Embedded terminal application.
Lexmark	MX622		Yes	No	No	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No
Konica Minolta	6120	AccurioPress	Yes	Yes	No	Yes	Yes	No		No	Yes	Yes		No	No	No	No	No	No	No	No
Konica Minolta	6136	AccurioPress	Yes	Yes	No	Yes	Yes	No		No	Yes	Yes		No	No	No	No	No	No	No	No
HP	N9120 fn2	ScanJet	No	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU19 and MU20 require EAP license. FW bundle version 4.6.0.1 and later required for USB readers. After Embedded Terminal installation print application should be hidden from the device web.
HP	Digital Sender Flow 8500 fn2	Digital Sender Flow	No	No	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU19 and MU20 require EAP license. FW bundle version 4.6.0.1 and later required for USB readers. After Embedded Terminal installation print application should be hidden from the device web. scanServerType SafeQ property has to be "WebDAV, FTP".
Ricoh	MP C8003		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	No	Ricoh Embedded terminal SDK 11.x HDD required. Display: WVGA (800x480) Scanning into 1/2 colors and grayscale are not supported by the device.- 1/2 colors: Documents are scanned in Full color Grayscale: Documents are scanned in BW multiple PDF: Documents are scanned in separate PDF files. Ricoh SOP Embedded terminal J/SDK is optional.
Xerox	VersaLink C9000	VersaLink	No	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended SafeQ Scan application not supported
Xerox	VersaLink C8000	VersaLink	No	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	No	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended SafeQ Scan application not supported
Epson	WF-C579R	WorkForce Pro	Yes	No	Yes	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	Epson Open Platform firware required for Embedded terminal.
HP	PageWide Flow MFP 785 series	MFP 780 series	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	PageWide MFP 780 series	MFP 780 series	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	SP C360		Yes	No	Yes	Yes	No	No	RICOH-MFP-COL-A4-C360-PRTONLY2	No	No	No	RICOH-MFP-COL-A4-C360-PRTONLY2 Limitations: If device runs out of paper during print/copy, jobs are accounted after the paper is refilled. Only print counters are checked. Copies are ignored. Suitable for direct queues.	No	No	No	No	No	No	No	No
Epson	WF-C8690		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	Epson Open Platform firware required for Embedded terminal.
Fuji Xerox(JAPAN)	Versant™ 180 Press	Production	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	No	No	No	No	No	Yes	Yes	A device with an ptional print controllers - GX, GXI, EX, EX-i, FreeFlow are not suported. XCP Terminal with USB card reader is not supported. NON-XCP terminal with EPA reader should be used.
HP	LaserJet E52545		Yes	No	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	No	Yes
Xerox	WorkCentre EC7836	WorkCentre	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	Yes	No	No	No	Yes	Yes	SafeQ 6 with Payment supported by devices with EIP 2 and higher SafeQ 5 with Payment supported by devices with EIP 2 and higher The embedded terminal does not support color restrictions for copy jobs.
Xerox	WorkCentre EC7856	WorkCentre	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	Yes	No	No	No	Yes	Yes	SafeQ 6 with Payment supported by devices with EIP 2 and higher SafeQ 5 with Payment supported by devices with EIP 2 and higher The embedded terminal does not support color restrictions for copy jobs.
Konica Minolta	AccurioPrint C759	AccurioPrint	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	t possible to integrate with Embedded terminal.
Sharp	MX-B355W	Nano IT	Yes	No	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes	Scan jobs are always rotated by 90°.
Sharp	MX-B455W	Nano IT	Yes	No	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Scan jobs are always rotated by 90°.
Sharp	MX-2630N		Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
HP	PageWide P57750	PageWide Pro	Yes	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Does not support Embedded technology for SafeQ Embedded terminal.
HP	LaserJet Pro M426	LaserJet Pro	Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Does not support Embedded technology for SafeQ Embedded terminal.
HP	PageWide P77760		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Does not support Embedded technology for SafeQ Embedded terminal.
HP	PageWide P77750		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Does not support Embedded technology for SafeQ Embedded terminal.
HP	PageWide P77740		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Does not support Embedded technology for SafeQ Embedded terminal.
Xerox	Phaser 6510		No	No	Yes	Yes	No	No		No	Yes	Yes		No	No	No	Yes	No	No	No	No	LD device from YSoft SafeQ 6 MU22.
Fuji Xerox	DocuPrint P365d	DocuPrint	No	No	No	No	No	No		No	No	No	LD device from YSoft SafeQ 6 MU22.	No	No	No	Yes	No	No	No	No	LD device from YSoft SafeQ 6 MU22.
Epson	WF-C5790	WorkForce Pro	Yes	No	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No	Epson Open Platform firware required for Embedded terminal.
Epson	WF-C869R	WorkForce Pro	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No	Epson Open Platform firware required for Embedded terminal.
Epson	WF-6590	WorkForce Pro	Yes	No	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No	Epson Open Platform firware required for Embedded terminal.
HP	LaserJet E72535	E725xx	Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 5 MU39 and later recommended YSoft SafeQ 6 MU19 and MU20 required EAP license FW bundle version 4.6.0.1 and later required for USB readers
HP	LaserJet Managed MFP E72530	E725xx	Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 5 MU39 and later recommended YSoft SafeQ 6 MU19 and MU20 required EAP license FW bundle version 4.6.0.1 and later required for USB readers
HP	LaserJet E72525	E725xx	Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 5 MU39 and later recommended YSoft SafeQ 6 MU19 and MU20 required EAP license FW bundle version 4.6.0.1 and later required for USB readers
Konica Minolta	bizhub 308e	bizhub	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Authentication cache not working.
Konica Minolta	bizhub 368e	bizhub	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes	SafeQ4 tested with FWG00-W4 (SafeQ6 GEN2) Authentication cache not supported. (SafeQ5 GEN1/SafeQ6 GEN2) Attempting to scan to “JPEG in BW” using SafeQ Scan Workflow does not start scanning because it is unsupported combination by bizhub.
Konica Minolta	bizhub 458e	bizhub	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Firmware of tested device: GC2-09 SafeQ4 tested with FWG00-W4 (SafeQ6 GEN2) Authentication cache not supported. (SafeQ5 GEN1/SafeQ6 GEN2) Attempting to scan to “JPEG in BW” using SafeQ Scan Workflow does not start scanning because it is unsupported combination by bizhub.
Konica Minolta	bizhub 558e	bizhub	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Firmware of tested device: GC2-09 SafeQ4 tested with FWG00-W4 Authentication cache not working. (SafeQ5 GEN1/SafeQ6 GEN2) Attempting to scan to “JPEG in BW” using SafeQ Scan Workflow does not start scanning because it is unsupported combination by bizhub.
Konica Minolta	bizhub 658e	bizhub	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Firmware of tested device: GC2-09 SafeQ4 tested with FWG00-W4 Authentication cache not working. (SafeQ5 GEN1/SafeQ6 GEN2) Attempting to scan to “JPEG in BW” using SafeQ Scan Workflow does not start scanning because it is unsupported combination by bizhub.
HP	LaserJet Managed E82560	E825xx series	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	Yes	No	YSoft SafeQ 5 MU39 and later recommended YSoft SafeQ 6 MU19 and MU20 required EAP license FW bundle version 4.6.0.1 and later required for USB readers
HP	LaserJet Managed E82540	E825xx series	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	Yes	No	FW bundle version 4.6.0.1 and later required for USB readers YSoft SafeQ 5 MU39 and later recommended
HP	LaserJet Managed E82550	E825xx series	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	Yes	No	FW bundle version 4.6.0.1 and later required for USB readers YSoft SafeQ 5 MU39 and later recommended
Konica Minolta	C759	bizhub	Yes	Yes	Yes	Yes	Yes	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Firmware: G00-09
Konica Minolta	C659	bizhub	Yes	Yes	Yes	Yes	Yes	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Firmware: G00-09
Aurora	ADC225		Yes	Yes	Yes	Yes	No	No		No	No	No	req. SAFEQ-46592	Yes	Yes	No	No	No	No	Yes	Yes	Tested Controler ROM version for SafeQ5: A90G0Y0-8100-G00-03 Authentication cache not yest tested for SafeQ 6.
Aurora	ADC265		Yes	Yes	Yes	Yes	No	No		No	No	No	req. SAFEQ-46592	Yes	Yes	No	No	No	No	Yes	Yes	Tested Controler ROM version for SafeQ5: A90G0Y0-8100-G00-03 Authentication cache not yest tested for SafeQ 6.
HP	Color LaserJet Managed MFP E87660		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	* YSoft SafeQ 5 MU39 and later recommended * YSoft SafeQ 6 MU19 and MU20 require EAP license. * FW bundle version 4.6.0.1 and later required for USB readers
HP	Color LaserJet Managed MFP E87650		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	* YSoft SafeQ 5 MU39 and later recommended * YSoft SafeQ 6 MU19 and MU20 require EAP license. * FW bundle version 4.6.0.1 and later required for USB readers
HP	Color LaserJet Managed MFP E87640		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	* YSoft SafeQ 5 MU39 and later recommended * YSoft SafeQ 6 MU19 and MU20 require EAP license. * FW bundle version 4.6.0.1 and later required for USB readers
Develop	ineo+ 2060		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Recommended firmware: GM9-21 and newer System auto reset is disabled by default, please contact your distributor for service menu configuration. Authentication cache not yest tested for SafeQ 6 With internal controller IC-603. Firmware GM9-21 and later supports Billing codes and Card self assignment. RBE and Finishing options are not supported.
Develop	ineo+ 2060L		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Recommended firmware: GM9-21 and newer System auto reset is disabled by default, please contact your distributor for service menu configuration. Authentication cache not yest tested for SafeQ 6 With internal controller IC-603. Firmware GM9-21 and later supports Billing codes and Card self assignment. RBE and Finishing options are not supported.
Lexmark	MX912		Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes
Lexmark	MX911		Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes
Lexmark	MX910		Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes
Samsung	C4060FX		Yes	No	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	No	Safeq 5 MU 44 required
Fuji Xerox	Versant™ 180 Press	Production	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	No	No	No	No	No	Yes	Yes	Tested FW Versant 180(Tested for n-XCP with EPA reader only): Controller ROM: 1.3.13 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal Generation 1/2 and USB card reader are not suported on Versant models. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported. A device with an optional print controllers - GX, GXI, EX, EX-i, FreeFlow are not suported.
Ricoh	MP 6055		Yes	Yes	No	Yes	Yes	No	RICOH-MFP-BW-A3-255	No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Fuji Xerox	ApeosPort-VI C2271	ApeosPort-VI	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VI C2271(APAC model): Controller ROM: 1.1.11 SJFI: 3.10.0 SSMI: 1.26.1 Plugin: 1.1.5 General USB Card reader can be used in combination with XCP plugin terminal. EPA Card reader can be used in combination with native terminal with Authentication Agent. EPA interface has not been supported from ApeosPort-VI(2016) for 3rd party partners by Fuji Xerox. The device has EPA connector on the back panel, however the EPA interface operation is not guarantee by Fuji Xerox. So correct functioning of the EPA card reader is not guaranteed. Copying For XCP terminal to restrict Full Color copy by SafeQ user Access Right, the setting bellow shall be applied to the device. Log in to the device as Administrator -> tools -> Authentication/Security Settings -> Authentication -> Access Control -> Feature access -> Color Copying (change it to Locked) -> Save -> Navigate out of all settings and reboot the device. Scanning SafeQ5 Workflow scan does not support XDW format. SafeQ6 Workflow scan does not support XPS and XDW format. Common Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black). Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Xerox	VersaLink C7000	VersaLink	No	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended SafeQ Scan application not supported
Xerox	VersaLink B615	VersaLink	Yes	No	No	Yes	Yes	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended
Xerox	VersaLink B605	VersaLink	Yes	No	No	Yes	Yes	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended
Xerox	VersaLink C605	VersaLink	Yes	No	Yes	Yes	Yes	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended
Xerox	VersaLink C505	VersaLink	Yes	No	Yes	Yes	Yes	No		No	Yes	Yes		Yes	Yes	No	Yes	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended LD device from YSoft SafeQ 6 Build 47
Xerox	VersaLink C500	VersaLink	No	No	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended SafeQ Scan application not supported
Ricoh	MP 402		Yes	No	No	Yes	No	No		No	No	No	request SAFEQ-45141, SAFEQ-42947	Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Fuji Xerox(JAPAN)	ApeosPort-VI C2271	ApeosPort-VI	Yes	Yes	Yes	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VI C3371 Controller ROM: 1.0.19 SJFI: 3.9.0 SSMI: 1.26.0 Plugin: 1.1.2 Plugin platform: 2.0.0 General USB Card reader can be used in combination with XCP plugin terminal. EPA Card reader can be used in combination with native terminal with Authentication Agent. EPA interface has not been supported from ApeosPort-VI(2016) for 3rd party partners by Fuji Xerox. The device has EPA connector on the back panel, however the EPA interface operation is not guarantee by Fuji Xerox. So correct functioning of the EPA card reader is not guaranteed. Copying For XCP terminal to restrict Full Color copy by SafeQ user Access Right, the setting bellow shall be applied to the device. Log in to the device as Administrator -> tools -> Authentication/Security Settings -> Authentication -> Access Control -> Feature access -> Color Copying (change it to Locked) -> Save -> Navigate out of all settings and reboot the device. Scanning SafeQ5 Workflow scan does not support XDW format. SafeQ6 Workflow scan does not support XPS and XDW format. Common Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black). Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Sharp	MX-5500N	C-Dragon	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes	Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Sharp	MX-M450U with MX-NBX3	Jupiter 2	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No	t tested yet
Sharp	MX-M350U	Jupiter 2	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No	t tested yet
Sharp	MX-M450N	Jupiter 2	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No	t tested yet
Sharp	MX-M350N	Jupiter 2	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No	t tested yet
Sharp	MX-B382	B-Frontier 2	Yes	No	No	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No	OSA 3.5
Develop	ineo+ 286		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No
Develop	ineo+ 256		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No
Develop	Ineo 213		Yes	Yes	No	Yes	Yes	No		No	Yes	Yes		No	No	No	No	No	No	No	No
Develop	Ineo 163		Yes	Yes	No	Yes	Yes	No		No	Yes	Yes		No	No	No	No	No	No	No	No
Lanier	1013		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	CLP 4626		No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	LP 4140		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	LP 4228		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	LP 4128		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	LP 4045		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	LP 4030		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	LP 4024		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	LP 4022		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DC 2532		Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DC 2525		Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DCC 2520		Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DC 2150		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DC 2140		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DC 2130		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DC 2025		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DC 2020		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Canon	LBP6670dn	i-SENSYS	No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	CLC5151		No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	CLC4040		No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	W7200		No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	PC-700		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	MF9280Cdn	i-SENSYS	Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iR ADVC7270	Image Runner	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iR ADV C7260	Image Runner	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iR 6275i	Image Runner	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iR 6265i	Image Runner	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iR 6255i	Image Runner	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	MF8040Cn	i-SENSYS	Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	MF4580dn	i-SENSYS	Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	MF4570dn	i-SENSYS	Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	LBP3000	i-SENSYS	No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	LBP6780x	i-SENSYS	No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	LBP6750dn	i-SENSYS	No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	LBP6680x	i-SENSYS	No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	LBP6650dn	i-SENSYS	No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	LBP6300dn	i-SENSYS	No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	LBP7210Cdn	i-SENSYS	No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	LBP7200Cdn	i-SENSYS	No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iR 600V	Image Runner	Yes	Yes	No	Yes	No	No		No	No	No	Request: YSOFT-2014-17610	No	No	No	No	No	No	No	No
Canon	iR 600	Image Runner	Yes	Yes	No	Yes	No	No		No	No	No	Request: YSOFT-2014-17610	No	No	No	No	No	No	No	No
Canon	iR 60	Image Runner	Yes	Yes	No	Yes	No	No		No	No	No	Request: YSOFT-2014-17610	No	No	No	No	No	No	No	No
Canon	iR 550	Image Runner	Yes	Yes	No	Yes	No	No		No	No	No	Request: YSOFT-2014-17610	No	No	No	No	No	No	No	No
Canon	iR 2320	Image Runner	Yes	Yes	No	Yes	No	No		No	No	No	Request: YSOFT-2013-7303 Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2318	Image Runner	Yes	Yes	No	Yes	No	No		No	No	No	Request: YSOFT-2013-7303 Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2030	Image Runner	Yes	Yes	No	Yes	No	No		No	No	No	Request: YSOFT-2013-7303 Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2025	Image Runner	Yes	Yes	No	Yes	No	No		No	No	No	Request: YSOFT-2013-7303 Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2022	Image Runner	Yes	Yes	No	Yes	No	No		No	No	No	Request: YSOFT-2013-7303 Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2020	Image Runner	Yes	Yes	No	Yes	No	No		No	No	No	Request: YSOFT-2013-7303 Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2018	Image Runner	Yes	Yes	No	Yes	No	No		No	No	No	Request: YSOFT-2013-7303 Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2016	Image Runner	Yes	Yes	No	Yes	No	No		No	No	No	Request: YSOFT-2013-7303 Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	i-SENSYS MF5880dn	i-SENSYS	Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	i-SENSYS MF4690PL	i-SENSYS	Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iRC 5185i	Image Runner	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iRC 5180i	Image Runner	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iRC 4580i	Image Runner	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iRC 4080i	Image Runner	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iRC 1028i	Image Runner	Yes	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iR ADV C7065	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	blocking cable requires addtional Canon Kit A1 with 9PIN DSUB connector
Canon	iRC 3480	Image Runner	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iRC 3380	Image Runner	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iRC 3080	Image Runner	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iRC 2880	Image Runner	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iRC 2550	Image Runner	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iRC 2380	Image Runner	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Canon	iR 3035	Image Runner	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C711		No	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C320		No	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C420		No	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C411-ME		No	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C411		No	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX3500		No	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX400		No	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX2500		No	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX3000		No	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C730L		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C731M		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C731		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C730M		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C730		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C831		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C830		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C721M		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C721		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C720		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 821M		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C821		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 820M		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP C820		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 810-ME		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 811M		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 811		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 810M		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 810		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX9800M		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX9800		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX8800M		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX8800		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX7500		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO 9000M		No	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX9000		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX6100D		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX6600		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX6100		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX8200-ME		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX7200		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX8200M		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO CX8200		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO Color 6500		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO Color 6000		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO Color 7100		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO Color 8100		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO Color 8000		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 4310		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 4300		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 4210		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 4010		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX96e		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 4000		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX86S		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX85S		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 8300		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 6330		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 6320		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 6310		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 8200		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 6220		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 6210		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 6120		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 6110		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 6100		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 9100Pro		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO SP 8100		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX860e		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX660S		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX760		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO Pro100		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX850		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX750		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX650S		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX920		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX730N		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX630N		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX630		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX720N		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX620N		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	IPSiO NX620		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	Preter300		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	Preter350		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	Preter355		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	Preter600		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	Preter650		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio C 2800		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio C 2850		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	C3100		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	C3100P - V		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio C 3100FP - V		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio C 4000		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio C 4050		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio C 4055		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	C3105		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio C 3105P - V		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio C 5100		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio C 5105		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 135		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 165		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 220		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 221		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 250		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 270		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 271		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 300		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 352		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 353		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 450		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 451		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 452		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 453		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 600		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 601		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 602		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 603		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 750		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 751		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 752		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 753		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 900Pro		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 1050Pro		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo C246		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo C355it		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo C355		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo C380		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 455		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo C455itPro		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo C600		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo C600Pro		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio MP 6000	imagio MP 7500/6000	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	VM TYPE 1
Ricoh (Japan)	imagio MP 7500	imagio MP 7500/6000	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	VM TYPE 1
Ricoh (Japan)	imagio MP 8000	imagio MP 8000	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	VM TYPE 1
Ricoh (Japan)	imagio MP 1300	imagio MP 1600/1300	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio MP 1600	imagio MP 1600/1300	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio MP 6001GP	imagio MP 6001GP	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Unknown
Ricoh (Japan)	imagio MP 6002GP	imagio MP 9002/9002T/7502/6002/6002GP	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Unknown
Ricoh (Japan)	imagio MP 6002	imagio MP 9002/9002T/7502/6002/6002GP	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Unknown
Ricoh (Japan)	imagio MP 7502	imagio MP 9002/9002T/7502/6002/6002GP	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Unknown
Ricoh (Japan)	imagio MP 9002T	imagio MP 9002/9002T/7502/6002/6002GP	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Unknown
Ricoh (Japan)	imagio MP 9002	imagio MP 9002/9002T/7502/6002/6002GP	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Unknown
Ricoh (Japan)	imagio MP W4000	imagio MP W4000	No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio MP W4001	imagio MP W4001	No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio MP W2401	imagio MP W3601/W2401	No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio MP W3601	imagio MP W3601/W2401	No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio MP 3353	imagio MP 2553/3353	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio MP 2553	imagio MP 2553/3353	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio MP C1803	imagio MP C1803	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio MP C2503	imagio MP C2503	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio MP C6003	imagio MP C3003/C3503/ C4503/C5503/ C6003	Yes	Yes	Yes	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	No
Ricoh (Japan)	imagio MP C5503	imagio MP C3003/C3503/ C4503/C5503/ C6003	Yes	Yes	Yes	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	No
Ricoh (Japan)	imagio MP C4503	imagio MP C3003/C3503/ C4503/C5503/ C6003	Yes	Yes	Yes	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	No
Ricoh (Japan)	imagio MP C3503	imagio MP C3003/C3503/ C4503/C5503/ C6003	Yes	Yes	Yes	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	No
Ricoh (Japan)	imagio MP C3003	imagio MP C3003/C3503/ C4503/C5503/ C6003	Yes	Yes	Yes	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	No
Ricoh (Japan)	imagio MP C1500	imagio MP C1500	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Unknown
Ricoh (Japan)	imagio MP C1800 SP	imagio MP C1800/C1800 SP	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Unknown
Ricoh (Japan)	imagio MP C1800	imagio MP C1800/C1800 SP	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Unknown
Ricoh (Japan)	imagio MP C2500	imagioMP C4500/C4500it/C3500/C3500it/C3000/C2500	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	VM TYPE 1
Ricoh (Japan)	imagio MP C3000	imagio MP C4500/C4500it/C3500/C3500it/C3000/C2500	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	VM TYPE 1
Ricoh (Japan)	imagio MP C3500it	imagio MP C4500/C4500it/C3500/C3500it/C3000/C2500	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	VM TYPE 1
Ricoh (Japan)	imagio MP C3500	imagio MP C4500/C4500it/C3500/C3500it/C3000/C2500	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	VM TYPE 1
Ricoh (Japan)	imagio MP C4500it	imagio MP C4500/C4500it/C3500/C3500it/C3000/C2500	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	VM TYPE 1
Ricoh (Japan)	imagio MP C4500	imagio MP C4500/C4500it/C3500/C3500it/C3000/C2500	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	VM TYPE 1
Ricoh (Japan)	imagio MP C4500 CP	imagio MP C4500 CP	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Unknown
Ricoh (Japan)	imagio MP C4001it	imagio MP C5001it/C4001it	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Unknown
Ricoh (Japan)	imagio MP C5001A	imagio MP C5001it/C4001it	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Unknown
Ricoh (Japan)	imagio MP C5001it	imagio MP C5001it/C4001it	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Unknown
Fuji Xerox	Color 560	Production Printer	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	No	No	No	No	No	Yes	No	Terminal Embedded was tested with optional print controller (internal Fiery) Fiery do not block Server - Printer printing Printing via fiery is feasible however fiery doesnt parsing username to Printer;therefore SafeQ only able to capture job name (username: unknown) FW: Controller ROM:1.145.9 IOT ROM:64.24.0 Finisher C ROM:18.32.0 SSMI:1.15.101 SJFI:3.0.17 IIT:6.18.0
Fuji Xerox	3035	DocuWide	Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	202	DocuPrint	No	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	3105	DocuPrint	No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	CP305d	DocuPrint	No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre 900	Docu Centre	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre 1100	Docu Centre	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre 236	Docu Centre	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre 286	Docu Centre	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre 336	Docu Centre	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre C250	Docu Centre	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre C360	Docu Centre	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre C450	Docu Centre	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre 1085	Docu Centre	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre 1055	Docu Centre	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	Versant™ 80 Press	Production	Yes	Yes	Yes	Yes	No	No	FUJI-XEROX-MFP-COL-PRODUCTION-BETA	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	Yes	Tested FW Versant 180(Tested for n-XCP with EPA reader only): Controller ROM: 1.3.13 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal Generation 1/2 and USB card reader are not suported on Versant models. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported. A device with an ptional print controllers - GX, GXI, EX, EX-i, FreeFlow are not suported.
Fuji Xerox	Color C70	Production	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Terminal Embedded was tested without using an optional print controller ( Linkage of Fiery with MFP removed )
Fuji Xerox	Color C60	Production	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Terminal Embedded was tested without using an optional print controller ( Linkage of Fiery with MFP removed )
Fuji Xerox	ApeosPort-V 3065	ApeosPort-V	Yes	Yes	No	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Tested FW 3060: Controller ROM: 1.1.8 SJFI: 3.10.0 SSMI: 1.25.4 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is suported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V 3060	ApeosPort-V	Yes	Yes	No	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Tested FW 3060: Controller ROM: 1.1.8 SJFI: 3.10.0 SSMI: 1.25.4 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is suported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V 2060	ApeosPort-V	Yes	Yes	No	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Tested FW 3060: Controller ROM: 1.1.8 SJFI: 3.10.0 SSMI: 1.25.4 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is suported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V C7785	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C5580 Controller ROM: 1.3.7 SJFI: Version 3.5.0 SSMI: Version 1.21.0 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V C6685	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C5580 Controller ROM: 1.3.7 SJFI: Version 3.5.0 SSMI: Version 1.21.0 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V C5585	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C5580 Controller ROM: 1.3.7 SJFI: Version 3.5.0 SSMI: Version 1.21.0 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Rex Rotary	MP 2550	Russian-C5c	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	SDK/J 4.0.x F Display: WVGA (800x480)
Rex Rotary	MP 2352SP		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Muratec	MFX 3091	Oki MB 471	Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Muratec	MFX C2700	Oki MC 561	Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Muratec	MFX 4580N	KM BH 364e KM BH 454e	Yes	Yes	No	Yes	No	No	MINOLTA-MFP-BW-A3-XXXE	No	No	No	Recommended driver:MINOLTA-MFP-BW-A3-XXXE Limitations:There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy.Duplex print is accounted according to parser from job information.	Yes	Yes	No	No	No	No	Yes	No
Muratec	MFX 3680N	KM BH 364e KM BH 454e	Yes	Yes	No	Yes	No	No	MINOLTA-MFP-BW-A3-XXXE	No	No	No	Recommended driver:MINOLTA-MFP-BW-A3-XXXE Limitations:There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy.Duplex print is accounted according to parser from job information.	Yes	Yes	No	No	No	No	Yes	No
Muratec	MFX C5580N	KM BH C224e - BH C554e	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations:There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy.Duplex print is accounted according to parser from job information.Each 2color print is accounted as a color print.Each single color or 2color copy is accounted as a color copy.	Yes	Yes	No	No	No	No	Yes	No	Browser with/without MyPanel: HDD: 250GB, Memory: 4GB (extended memory UK-204), LK-101v3 iOption License Kit Recommended latest firmware (above G20-58). USB print without re-authentication when using IC card authentication is supported only with OpenAPI 4.0
Muratec	MFX C4580N	KM BH C224e - BH C554e	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations:There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy.Duplex print is accounted according to parser from job information.Each 2color print is accounted as a color print.Each single color or 2color copy is accounted as a color copy.	Yes	Yes	No	No	No	No	Yes	No	Browser with/without MyPanel: HDD: 250GB, Memory: 4GB (extended memory UK-204), LK-101v3 iOption License Kit Recommended latest firmware (above G20-58). USB print without re-authentication when using IC card authentication is supported only with OpenAPI 4.0
Muratec	MFX C3680N	KM BH C224e - BH C554e	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations:There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy.Duplex print is accounted according to parser from job information.Each 2color print is accounted as a color print.Each single color or 2color copy is accounted as a color copy.	Yes	Yes	No	No	No	No	Yes	No	Browser with/without MyPanel: HDD: 250GB, Memory: 4GB (extended memory UK-204), LK-101v3 iOption License Kit Recommended latest firmware (above G20-58). USB print without re-authentication when using IC card authentication is supported only with OpenAPI 4.0
Muratec	MFX C2880N	KM BH C224e - BH C554e	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations:There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy.Duplex print is accounted according to parser from job information.Each 2color print is accounted as a color print.Each single color or 2color copy is accounted as a color copy.	Yes	Yes	No	No	No	No	Yes	No	Browser with/without MyPanel: HDD: 250GB, Memory: 4GB (extended memory UK-204), LK-101v3 iOption License Kit Recommended latest firmware (above G20-58). USB print without re-authentication when using IC card authentication is supported only with OpenAPI 4.0
Muratec	MFX C2280N	KM BH C224e - BH C554e	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations:There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy.Duplex print is accounted according to parser from job information.Each 2color print is accounted as a color print.Each single color or 2color copy is accounted as a color copy.	Yes	Yes	No	No	No	No	Yes	No	Browser with/without MyPanel: HDD: 250GB, Memory: 4GB (extended memory UK-204), LK-101v3 iOption License Kit Recommended latest firmware (above G20-58). USB print without re-authentication when using IC card authentication is supported only with OpenAPI 4.0
Muratec	MFX 3530	KM BH25e	Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Embedded terminal not supported.
Fuji Xerox(JAPAN)	3100	DocuPrint	No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	3000	DocuPrint	No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	7000	DocuCentre-II	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	6000	DocuCentre-II	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	5000	DocuCentre-II	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	4000	DocuCentre-II	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	3000	DocuCentre-II	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	ApeosPort-II 7000	ApeosPort-II	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	ApeosPort-II 6000	ApeosPort-II	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	ApeosPort-II 5000	ApeosPort-II	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	ApeosPort-II 4000	ApeosPort-II	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	ApeosPort-II 3000	ApeosPort-II	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	7000	DocuCenter-III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-APIII-4000-JP	No	No	No	Recommended driver: FUJI-XEROX-MFP-BW-A3-APIII-4000-JP Limitations: Each A3 page is accounted as A4 page. / Scan to USB is not accounted. For Preview, Rule-base print, use PCL/Postscript driver. Default ART-EX driver is not supported.	No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	6000	DocuCenter-III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-APIII-4000-JP	No	No	No	Recommended driver: FUJI-XEROX-MFP-BW-A3-APIII-4000-JP Limitations: Each A3 page is accounted as A4 page. / Scan to USB is not accounted. For Preview, Rule-base print, use PCL/Postscript driver. Default ART-EX driver is not supported.	No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	5000	DocuCenter-III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-APIII-4000-JP	No	No	No	Recommended driver: FUJI-XEROX-MFP-BW-A3-APIII-4000-JP Limitations: Each A3 page is accounted as A4 page. / Scan to USB is not accounted. For Preview, Rule-base print, use PCL/Postscript driver. Default ART-EX driver is not supported.	No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	4000	DocuCenter-III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-APIII-4000-JP	No	No	No	Recommended driver: FUJI-XEROX-MFP-BW-A3-APIII-4000-JP Limitations: Each A3 page is accounted as A4 page. / Scan to USB is not accounted. For Preview, Rule-base print, use PCL/Postscript driver. Default ART-EX driver is not supported.	No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	3010	DocuCenter-III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-APIII-4000-JP	No	No	No	Recommended driver: FUJI-XEROX-MFP-BW-A3-APIII-4000-JP Limitations: Each A3 page is accounted as A4 page. / Scan to USB is not accounted. For Preview, Rule-base print, use PCL/Postscript driver. Default ART-EX driver is not supported.	No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	3000	DocuCenter-III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-APIII-4000-JP	No	No	No	Recommended driver: FUJI-XEROX-MFP-BW-A3-APIII-4000-JP Limitations: Each A3 page is accounted as A4 page. / Scan to USB is not accounted. For Preview, Rule-base print, use PCL/Postscript driver. Default ART-EX driver is not supported.	No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	2000	DocuCenter-III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-APIII-4000-JP	No	No	No	Recommended driver: FUJI-XEROX-MFP-BW-A3-APIII-4000-JP Limitations: Each A3 page is accounted as A4 page. / Scan to USB is not accounted. For Preview, Rule-base print, use PCL/Postscript driver. Default ART-EX driver is not supported.	No	No	No	No	No	No	No	No
Fuji Xerox(JAPAN)	Versant™ 80 Press	Production	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	No	No	No	No	No	Yes	Yes	A device with an ptional print controllers - GX, GXI, EX, EX-i, FreeFlow are not suported. XCP Terminal with USB card reader is not supported. NON-XCP terminal with EPA reader should be used.
Fuji Xerox(JAPAN)	ApeosPort-V C7776	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C2276: Controller ROM: 1.2.2 SJFI: 3.10.0 SSMI: 1.25.4 Contents: 2.0.12 Plugin: 1.0.6 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox(JAPAN)	ApeosPort-V C6676	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C2276: Controller ROM: 1.2.2 SJFI: 3.10.0 SSMI: 1.25.4 Contents: 2.0.12 Plugin: 1.0.6 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox(JAPAN)	ApeosPort-V C5576	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C2276: Controller ROM: 1.2.2 SJFI: 3.10.0 SSMI: 1.25.4 Contents: 2.0.12 Plugin: 1.0.6 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox(JAPAN)	ApeosPort-V C4476	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C2276: Controller ROM: 1.2.2 SJFI: 3.10.0 SSMI: 1.25.4 Contents: 2.0.12 Plugin: 1.0.6 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox(JAPAN)	ApeosPort-V C3376	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C2276: Controller ROM: 1.2.2 SJFI: 3.10.0 SSMI: 1.25.4 Contents: 2.0.12 Plugin: 1.0.6 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox(JAPAN)	ApeosPort-V C2276	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C2276: Controller ROM: 1.2.2 SJFI: 3.10.0 SSMI: 1.25.4 Contents: 2.0.12 Plugin: 1.0.6 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Sagemcom	MF9545		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Sagemcom	MF9535		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Sagemcom	MF9327		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Sagemcom	MF9323		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 242		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 212		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 182		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 211		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 181		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 245		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 225		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 195		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Infotec	IS 2445		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	TaskAlfa 820		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	TaskAlfa 205c		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	KM-C2630D	Mirage	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	KM-C2630	Mirage	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 7550ci	Mercury	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 6550ci	Mercury	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 8000i	Zeus	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 6500i	Zeus	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	FS-C8650DN	Venus Printer	No	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	FS-C8600DN	Venus Printer	No	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	FS-C8500DN	Saturn Printer	No	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	FS-C8026	Magic	No	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	FS-C5400DN	Treasure	No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	FS-C5350DN	Cassiopeia 30	No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	FS-C5300N	Cassiopeia	No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	FS-C5200N	Cassiopeia	No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	FS-C5100N	Cassiopeia	No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	FS-9520DN	Hornet 2	No	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	FS-9120DN	Hornet 2	No	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	KM-1118MFP	Discovery MFP	Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	FS-C2126MFP+	Gemini L	Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	FS-C2026MFP+	Gemini L	Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 750c	Broad Peak	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 650c	Broad Peak	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 550c	Broad Peak	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 265ci	Black Gemini	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 820	Harrier 1.5	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 620	Harrier 1.5	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 180	Orion GDI	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	KM-5530	Eagle	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	KM-4530	Eagle	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	KM-7530	Pegasus 3	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	KM-6330	Pegasus 2	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	KM-6230	Pegasus 1	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	KM-1635	Atlantis GDI	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	KM-1620	Atlantis Copier	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 306i	Matsuri HyPAS	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 256i	Matsuri HyPAS	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	FS-6530MFP	Matsuri HyPAS	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Kyocera Mita	FS-6525MFP	Matsuri HyPAS	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Utax	LP 3151		No	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Utax	LP 3140		No	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Utax	LP 3228		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Utax	LP 3128		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Utax	3045		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Utax	LP 3030		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Utax	LP 3024		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Utax	LP 3022		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Utax	CDC 1532		Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Utax	CDC 1525		Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Utax	CDC 1520		Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Utax	CD 1050		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Utax	CD 1040		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Utax	CD 1030		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Utax	CD 1025		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Utax	CD 1020		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Sharp	MX-M1205	Hercules 2.5	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	No	MX-AMX2 and/or MX-AMX3 modules for OSA support required.See YSoft SafeQ documentation for more details.Title: YSoft SafeQ Embedded Terminal for Sharp OSA
Sharp	MX-M1055	Hercules 2.5	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	No	MX-AMX2 and/or MX-AMX3 modules for OSA support required.See YSoft SafeQ documentation for more details.Title: YSoft SafeQ Embedded Terminal for Sharp OSA
Sharp	MX-M356N	va E	Yes	Yes	No	Yes	No	No	SAFEQ-36250	No	Yes	Yes		Yes	No	No	No	No	No	Yes	No
Sharp	MX-M316N	va E	Yes	Yes	No	Yes	No	No	SAFEQ-36250	No	Yes	Yes		Yes	No	No	No	No	No	Yes	No
Sharp	MX-M266N	va E	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	No	No	No	No	No	Yes	No
Sharp	AR-6020N		Yes	Yes	No	Yes	No	No		No	Yes	Yes	Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL or Post Script print language. Blocking cable support is being confirmed.	No	No	No	No	No	No	No	No
Sharp	MX-7500N	Polaris Pro	Yes	Yes	Yes	Yes	Yes	No		No	Yes	Yes		No	No	Yes	No	No	No	No	No	OSA 4+
Sharp	MX-6500N	Polaris Pro	Yes	Yes	Yes	Yes	Yes	No		No	Yes	Yes		No	No	Yes	No	No	No	No	No	OSA 4+
Sharp	AR-5618N		Yes	Yes	No	Yes	No	No		No	Yes	Yes	Only offline accounting can be used for this device at the moment. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Sharp	AR-5520N		No	No	No	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No
Sharp	MX-7000N	C-Dragon	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No
Sharp	MX-6200N	C-Dragon	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No
Sharp	MX-5000		No	No	No	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No
Sharp	AR-5516N	Pegasus III	No	No	No	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No
Olivetti	d-Color MF284		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Olivetti	d-Color MF254		Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	Yes	Yes	Yes	Yes	To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
Olivetti	PG L 450		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Olivetti	PG L 230		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Olivetti	PG L 2028SP		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Olivetti	PG L 2028		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Olivetti	800		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Olivetti	D-Copia 600		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Olivetti	D-Copia 25		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Olivetti	D-Copia 20		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	IPSiO SP C711		No	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	Aficio SP C320DN		No	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	Aficio SP C831DN		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	Aficio SP C830DN		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	Aficio SP C730DN		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	Aficio SP C821DN		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	Aficio SP C820DN		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	Aficio SP 8300DN		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	Aficio AP610N		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	Aficio AP2610N		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	Aficio AP2610		No	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	Aficio MPC401		Yes	No	Yes	Yes	Yes	No		No	No	No	Beta driver is available for certification. Offline accounting is supported. * All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	Yes	Yes	No	No	No	No	Yes	Yes	SDK 12.x HDD required. Display: WVGA (800x480) Embedded Terminal for SafeQ 5 is supported from Maintenance Update 12.Embedded Terminal for SafeQ 4 is supported from Service Release 44 USB card reader setting: Open [User Tools/Counter/Enquiry] > [System Settings] > [General Features] > [Program/Change USB Device List]. Change Device vendor ID and product ID of the USB device.YSoft Card readers:Vendor ID: 0x214cProduct ID: 0x0202Please note that the Vendor ID and Product ID have to be set just for device1 or for device2 (not for both at same time).
Ricoh	Pro 8100EX		Yes	Yes	No	Yes	No	No		No	No	No	Online accounting driver was not requested yet. Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
Ricoh	Aficio MP C4051		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	Aficio MP 5001		Yes	Yes	No	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	No	SDK/J 4.0.x F HDD required. Display: WVGA (800x480)
Ricoh	Aficio MP 4001		Yes	Yes	No	Yes	Yes	No		No	No	No		Yes	Yes	No	No	No	No	Yes	No	SDK/J 4.0.x F HDD required. Display: WVGA (800x480)
Ricoh	Aficio Color 4506 (E-310 v1.0)		Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	Aficio Color 3506		Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh	Aficio MP 171SPF		Yes	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Gestetner	MP 2550	Russian-C5c	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	SDK/J 4.0.x F Display: WVGA (800x480)
Gestetner	MP 2352SP		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
HP	Laserjet Pro 200 M276	LaserJet	Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	LaserJet Pro MFP M126 series		Yes	No	No	Yes	No	No		No	No	No	Request: SAFEQ-35466 Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
HP	T2500	DesignJet	Yes	Yes	Yes	Yes	No	No		No	No	No	Request: SAFEQ-33643Beta driver available for certifiation: OFFLINE-PLOTTER Limitations:Accounting method of this driver is similar to Offline accounting method in SafeQ.Driver uses coverage accounting to account paper formats larger than A3 in multiples of A4.A2/A1/A0 accounted as 4/8/16x A4.Jobs are accounted according to information from parser (Jobs that are cancelled on device during print are accounted).Print driver (not SafeQ accouting driver) have to support PCL, HPGL or PostScript print language.Enable rendering jobs as high-resolution (150 DPI) images to use this driver.Copy and scan jobs are not accounted.	No	No	No	No	No	No	No	No
HP	Color LaserJet CP1518ni	LaserJet	No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	Color LaserJet CP1515n	LaserJet	No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	Color LaserJet Enterprise MFP M680z	LaserJet	Yes	Yes	Yes	Yes	Yes	No		No	No	No	Request: YSOFT-2014-21841, YSOFT-2014-22409 Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language. Blocking interface limitations:Only copy function can be blocked via FIH port.	Yes	Yes	No	No	No	No	No	Yes
HP	Color LaserJet Enterprise MFP M680f	LaserJet	Yes	Yes	Yes	Yes	Yes	No		No	No	No	Request: YSOFT-2014-21841, YSOFT-2014-22409 Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language. Blocking interface limitations:Only copy function can be blocked via FIH port.	Yes	Yes	No	No	No	No	No	Yes
HP	Color LaserJet Enterprise MFP M680dn	LaserJet	Yes	Yes	Yes	Yes	Yes	No		No	No	No	Request: YSOFT-2014-21841, YSOFT-2014-22409 Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language. Blocking interface limitations:Only copy function can be blocked via FIH port.	Yes	Yes	No	No	No	No	No	Yes
HP	Officejet Pro 276dw	OfficeJet	Yes	No	Yes	Yes	No	No		No	No	No	Request: YSOFT-2014-18718 Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
HP	Officejet Pro 251dw	OfficeJet	No	No	Yes	Yes	No	No		No	No	No	Request: YSOFT-2014-18717 Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
HP	Officejet Pro 8600	OfficeJet	Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	Color LaserJet CM1312	OfficeJet	Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	LaserJet Pro P1606dn		No	No	No	Yes	No	No		No	No	No	Device is not compatible with SafeQ online accouting method. Only offline accounting is possible. Job sent via Host-Based Driver are not accepted by SafeQ.Only exception (working set up) is Host-Based Driver installed on Windows 7 OS. Jobs are accepted by SafeQ when job is sent via Advanced TCP/IP Port instead of Standard TCP/IP Port.Advanced TCP/IP Port is avialable after installation of HP print driver for Windows.	No	No	No	No	No	No	No	No
HP	Color LaserJet CM6049		Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
HP	LaserJetP2035n		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	LaserJet M4349		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
HP	LaserJet2420dn		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	Color LaserJet 2605		No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	Color LaserJet2600n		No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
HP	Officejet Pro X551dw		No	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Oki	C841dn		No	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Oki	C811dn		No	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Oki	B841dn		No	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Oki	B801n		No	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Oki	MC560		Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Oki	C5550MFP		Yes	No	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Oki	C941dn		No	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Oki	B4545		Yes	No	No	Yes	No	No		No	No	No	Online accounting driver for this device cannot be created. Reason:Device does not change statuses. Result:Offline accounting only.	No	No	No	No	No	No	No	No
Xerox	WorkCentre 5024	WorkCentre	Yes	Yes	No	Yes	No	No	SAFEQ-32340	No	Yes	Yes		No	No	No	No	No	No	No	No
Xerox	WorkCentre 5022	WorkCentre	Yes	Yes	No	Yes	No	No	SAFEQ-32340	No	Yes	Yes		No	No	No	No	No	No	No	No
Xerox	6015NI	WorkCentre	Yes	No	Yes	Yes	Yes	No		No	Yes	Yes	Due to problems with SNMP communication on this device, online accounting is not possible. Offline accounting is not possible due to incompatible print language (HBPL).	No	No	No	No	No	No	No	No	Firmware 201305012030 External Mounting KIts: YSQM0-003-0000 for laying on table/ YSQM0-004-0000 for wall mounting Printer Specifications
Xerox	6700DN	Phaser	No	No	Yes	Yes	No	No		No	Yes	Yes	Device no longer supported, firmware fix not possible.	No	No	No	No	No	No	No	No
Xerox	DocuColor 2240		Yes	Yes	Yes	Yes	Yes	No		No	Yes	Yes		No	No	No	No	No	No	No	No	External Mounting KIts: YSQM0-007-0000 on device mounting /YSQM0-003-0000 for laying on table/ YSQM0-004-0000 for wall mounting Printer Specifications
Xerox	DocuColor 252		Yes	Yes	Yes	Yes	Yes	No		No	Yes	Yes		No	No	No	No	No	No	No	No	External Mounting KIts: YSQM0-007-0000 on device mounting /YSQM0-003-0000 for laying on table/ YSQM0-004-0000 for wall mounting Printer Specifications
Xerox	DocuColor 240		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No	External Mounting KIts: YSQM0-007-0000 on device mounting/YSQM0-003-0000 for laying on table/ YSQM0-004-0000 for wall mounting Printer Specifications
Xerox	Color EX700		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No	External Mounting KIts: YSQM0-003-0000 for laying on table/ YSQM0-004-0000 for wall mounting Printer Specifications
Xerox	Color 560 with EFI Fiery Integrated Controller		Yes	Yes	Yes	Yes	Yes	No		No	Yes	Yes		No	No	No	No	No	No	No	No	Firmware 55.40.21 External Mounting KIts: YSQM0-007-0000 on device mounting /YSQM0-003-0000 for laying on table/ YSQM0-004-0000 for wall mounting Printer Specifications FDI could be external Bear Kit or internal FDI build in device
Xerox	Color 550 with EFI Fiery Integrated Controller		Yes	Yes	Yes	Yes	Yes	No		No	Yes	Yes		No	No	No	No	No	No	No	No	Firmware 55.40.21 External Mounting KIts: YSQM0-007-0000 on device mounting /YSQM0-003-0000 for laying on table/ YSQM0-004-0000 for wall mounting Printer Specifications FDI could be external Bear Kit or internal FDI build in device
Xerox	Phaser 7800		No	Yes	Yes	Yes	Yes	No		No	Yes	Yes		No	No	No	No	No	No	No	No	External Mounting KIts: YSQM0-007-0000 on device mounting YSQM0-003-0000 for laying on table/ YSQM0-004-0000 for wall mounting Printer Specifications Device limitations prohibits use of online accounting. Only offline accounting possible.
Xerox	WorkCentre 7775	WC 77xx	Yes	Yes	Yes	Yes	Yes	No		No	Yes	Yes		No	Yes	Yes	No	No	No	Yes	No	Firmware 061.090.223.21400 required. External Mounting KIts: YSQM0-007-0000 on device mounting /YSQM0-003-0000 for laying on table/ YSQM0-004-0000 for wall mounting Printer Specifications SafeQ 5 with Payment not supported due to EIP version, which does not support payment functionality Firmware 061.090.223.214000 or later SafeQ 4 or SafeQ 5 is required for YSoft USB Card Reader support. FDI could be external Bear Kit or internal FDI build in device The embedded terminal does not support color restrictions for copy jobs
Xerox	WorkCentre 7765	WC 77xx	Yes	Yes	Yes	Yes	Yes	No		No	Yes	Yes		No	Yes	Yes	No	No	No	Yes	No	Firmware 061.090.223.21400 required. External Mounting KIts: YSQM0-007-0000 on device mounting /YSQM0-003-0000 for laying on table/ YSQM0-004-0000 for wall mounting Printer Specifications SafeQ 5 with Payment not supported due to EIP version, which does not support payment functionality Firmware 061.090.223.214000 or later SafeQ 4 or SafeQ 5 is required for YSoft USB Card Reader support. FDI could be external Bear Kit or internal FDI build in device The embedded terminal does not support color restrictions for copy jobs
Xerox	WorkCentre 7755	WC 77xx	Yes	Yes	Yes	Yes	Yes	No		No	Yes	Yes		No	Yes	Yes	No	No	No	Yes	No	Firmware 061.090.223.21400 required. External Mounting KIts: YSQM0-007-0000 on device mounting /YSQM0-003-0000 for laying on table/ YSQM0-004-0000 for wall mounting Printer Specifications SafeQ 5 with Payment not supported due to EIP version, which does not support payment functionality Firmware 061.090.223.214000 or later SafeQ 4 or SafeQ 5 is required for YSoft USB Card Reader support. FDI could be external Bear Kit or internal FDI build in device The embedded terminal does not support color restrictions for copy jobs
Lexmark	xs796		Yes	No	Yes	Yes	No	No	SAFEQ-29619	No	No	No		No	No	No	No	No	No	No	No
Lexmark	W840		No	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	X854		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	X852		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	X850		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	X342n		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	X340		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	X646		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	X642		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	X945		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	X940		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	C792		No	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	C748		No	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	C746		No	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	C546		No	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	C544		No	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	C543		No	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	C540		No	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Lexmark	C935		Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Samsung	SL-M4072FD		Yes	No	No	Yes	No	No		No	No	No	Request: YSOFT-2014-24822 Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
Samsung	SL-K7600GX	MX7 Series	Yes	Yes	No	Yes	No	No		No	No	No	Request: SAFEQ-38370( SL-K7400LX ) / SAFEQ-32827( SL-K7600LX )/SAFEQ-38189( SL-K7600LX ) Offline accounting is supported. * All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
Samsung	SL-K7600LX	MX7 Series	Yes	Yes	No	Yes	No	No		No	No	No	Request: SAFEQ-38370( SL-K7400LX ) / SAFEQ-32827( SL-K7600LX )/SAFEQ-38189( SL-K7600LX ) Offline accounting is supported. * All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
Samsung	SL-K7500LX	MX7 Series	Yes	Yes	No	Yes	No	No		No	No	No	Request: SAFEQ-38370( SL-K7400LX ) / SAFEQ-32827( SL-K7600LX )/SAFEQ-38189( SL-K7600LX ) Offline accounting is supported. * All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
Samsung	SL-K7500GX	MX7 Series	Yes	Yes	No	Yes	No	No		No	No	No	Request: SAFEQ-38370( SL-K7400LX ) / SAFEQ-32827( SL-K7600LX )/SAFEQ-38189( SL-K7600LX ) Offline accounting is supported. * All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
Samsung	SL-K7400LX	MX7 Series	Yes	Yes	No	Yes	No	No		No	No	No	Request: SAFEQ-38370( SL-K7400LX ) / SAFEQ-32827( SL-K7600LX )/SAFEQ-38189( SL-K7600LX ) Offline accounting is supported. * All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
Samsung	SL-C2670FW		Yes	No	Yes	Yes	No	No		No	No	No	Request: SAFEQ-33638 Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
Samsung	Printer Xpress C1810W		No	No	Yes	Yes	No	No		No	No	No	Request: SAFEQ-34343 Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
Samsung	SCX-6555	Rushmore (SuperUI)	Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Embedded terminal is not supported.
Samsung	SCX-8248	Cosmos-R	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Embedded terminal is not supported.
Samsung	SCX-8238	Cosmos-R	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Embedded terminal is not supported.
Samsung	CLX-9358	Cosmos-R	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Embedded terminal is not supported.
Samsung	CLX-9258	Cosmos-R	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Embedded terminal is not supported.
Samsung	CLX-9352NA	Cosmos-R	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Embedded terminal is not supported.
Samsung	CLX-9252NA	Cosmos-R	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Embedded terminal is not supported.
Samsung	X4300	Polaris-N	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	No	XOA-E required. Supported since SafeQ5 CU2
Samsung	X4250	Polaris-N	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	No	XOA-E required. Supported since SafeQ5 CU2
Samsung	X4220	Polaris-N	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	No	XOA-E required. Supported since SafeQ5 CU2
Samsung	K4250LX	Polaris-N	Yes	Yes	No	Yes	No	No		No	No	No	Request: SAFEQ-38824 (Embedded Terminal) Request: SAFEQ-38138(Online driver)	Yes	Yes	No	No	No	No	Yes	No	XOA-E required. Supported since SafeQ5 CU2 System Firmware Version: V5.C6.16 Main Firmware Version: V11.01.08.16_08-18-2015 XOA Framework Version: V1.29.0_01-07-2014 XOA Web Version: 1.4.3 Settings : Paper Substitution on Enabled.
Samsung	K4300LX	Polaris-N	Yes	Yes	No	Yes	No	No		No	No	No	Request: SAFEQ-38824 (Embedded Terminal) Request: SAFEQ-38138(Online driver)	Yes	Yes	No	No	No	No	Yes	No	XOA-E required. Supported since SafeQ5 CU2 System Firmware Version: V5.C6.16 Main Firmware Version: V11.01.08.16_08-18-2015 XOA Framework Version: V1.29.0_01-07-2014 XOA Web Version: 1.4.3 Settings : Paper Substitution on Enabled.
Samsung	K4350LX	Polaris-N	Yes	Yes	No	Yes	No	No		No	No	No	Request: Request: SAFEQ-38138(Online driver)	Yes	Yes	No	No	No	No	Yes	No	XOA-E required. Supported since SafeQ5 CU2 System Firmware Version: V5.C6.16 Main Firmware Version: V11.01.08.16_08-18-2015 XOA Framework Version: V1.29.0_01-07-2014 XOA Web Version: 1.4.3 Settings : Paper Substitution on Enabled.
Samsung	SMART MultiXpress K4250RX		Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Samsung	CLX-9306	Polaris	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	No	XOA-E required. Supported since SafeQ5 CU2
Samsung	CLX-9256	Polaris	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	No	XOA-E required. Supported since SafeQ5 CU2
Samsung	CLX-9206	Polaris	Yes	Yes	Yes	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	No	XOA-E required. Supported since SafeQ5 CU2
Samsung	Multi Xpress CLX-9350 Series		Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Samsung	Multi Xpress CLX-9250		Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Samsung	SCX-5637FR		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No	Device has no possibility for copy panel blocking. Only offline accounting is possible.
Samsung	ML-6515ND		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Samsung	ML-5515ND		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Epson	WorkForce AL-M300DN Series		No	No	No	Yes	No	No		No	Yes	Yes	Request: SAFEQ-33949 Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
Epson	AcuLaser C1100		No	No	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No
Epson	WorkForce AL-MX300DNF		Yes	No	No	Yes	No	No		No	Yes	Yes	Request: YSOFT-2014-23339 Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
Epson	WorkForce AL-M400DN		No	No	No	Yes	No	No		No	Yes	Yes	Request: YSOFT-2014-16455 Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
Epson	EPL-N4000+		No	No	No	Yes	No	No		No	Yes	Yes	Request: YSOFT-2014-15787 Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
Epson	EPL-N3000		No	No	No	Yes	No	No		No	Yes	Yes	Request: YSOFT-2014-15787 Offline accounting is supported.* All devices (incl. devices not covered by the list) are compatible with YSoft SafeQ offline accounting provided they support PCL, Post Script or HPGL print language.	No	No	No	No	No	No	No	No
Epson	WF-M5190	WorkForce Pro	No	No	No	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No
Epson	WorkForcePro WP-4595DNF		Yes	No	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No	no blocking available
Epson	WorkForcePro WP-4525		Yes	No	Yes	Yes	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No	no blocking available
Konica Minolta	Bizhub 602	bizhub	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Konica Minolta	Bizhub 502	bizhub	Yes	Yes	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Konica Minolta	KIP 700M	KIP	No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No	Can be used only with Off-line (parser) accounting
Konica Minolta	Fiery IC-413		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Konica Minolta	Fiery IC-412		No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Konica Minolta	C65hc	bizhub	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Konica Minolta	PRO C6501	bizhub	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Konica Minolta	PRO C6500	bizhub	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Konica Minolta	PRO C5501	bizhub	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Konica Minolta	PRO C5500	bizhub	Yes	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Aurora	AD 400 MNF		Yes	No	No	No	No	No		No	Yes	Yes		No	No	No	No	No	No	No	No
Konica Minolta	950i	bizhub	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	850i	bizhub	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Xerox	B415	VersaLink	Yes	No	No	Yes	No	No		No	Yes	Yes		Yes	No	No	No	No	No	No	Yes
Xerox	C625	VersaLink	Yes	No	Yes	Yes	No	No		No	Yes	Yes		Yes	No	No	No	Yes	Yes	No	Yes
Xerox	C620	VersaLink	No	No	Yes	Yes	No	No		No	Yes	Yes		Yes	No	No	No	Yes	Yes	No	Yes	EIP settings must be manually configured. Tested on SafeQ 6 Build 91. Tested function Print only.
IBM	Color LaserJet Enterprise X654		No	No	Yes	Yes	No	No		No	Yes	Yes		Yes	No	No	No	Yes	Yes	No	Yes	Workpath Gen 2 terminal is not supported due to 4.3" display limitation
HP	Color LaserJet Enterprise 6701		No	No	Yes	Yes	No	No		No	Yes	Yes		Yes	No	No	No	Yes	Yes	No	Yes	Workpath Gen 2 terminal is not supported due to 4.3" display limitation
HP	Color LaserJet Enterprise 5700		No	No	Yes	Yes	No	No		No	Yes	Yes		Yes	No	No	No	Yes	Yes	No	Yes	Workpath Gen 2 terminal is not supported due to 4.3" display limitation
HP	Color LaserJet Enterprise 6700		No	No	Yes	Yes	No	No		No	Yes	Yes		Yes	No	No	No	Yes	Yes	No	Yes	Workpath Gen 2 terminal is not supported due to 4.3" display limitation.
HP	Color LaserJet Enterprise MFP 6801		Yes	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	No	No	No	Yes	Yes	No	Yes
HP	Color LaserJet Enterprise MFP X677		Yes	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	No	No	No	Yes	Yes	No	Yes
HP	Color LaserJet Enterprise MFP 6800		Yes	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	No	No	No	Yes	Yes	No	Yes
HP	Color LaserJet Enterprise MFP 5800		Yes	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	No	No	No	Yes	Yes	No	Yes
Xerox	VersaLink B620		No	No	Yes	Yes	No	No		No	Yes	Yes		No	Yes	No	No	Yes	Yes	No	Yes	EIP settings must be manually configured. Tested on 121.026.003.25010.
Xerox	VersaLink C415		Yes	No	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	Yes	No	No	No	Yes	LD device since SAFEQ 6 Build 93. EIP settings must be manually configured. Tested on 120.028.023.30800 with patch 1468406v2.
Xerox	VersaLink B625		Yes	No	No	Yes	No	No		No	Yes	Yes		No	Yes	No	No	Yes	Yes	No	Yes	EIP settings must be manually configured. Tested on 118.024.002.27804.
Xerox	AltaLink C8270	C8130/C8135/C8145/C8155/C8170	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		No	Yes	No	No	Yes	Yes	No	Yes	EIP settings must be manually configured. Tested on 120.040.104.05200.
Konica Minolta	751i	bizhub	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	651i	bizhub	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	551i	bizhub	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	451i	bizhub	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	301i	bizhub	Yes	Yes	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	C751i	bizhub	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	C651i	bizhub	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	C551i	bizhub	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	C451i	bizhub	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	C361i	bizhub	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	C301i	bizhub	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	C251i	bizhub	Yes	Yes	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	4751i	bizhub	Yes	No	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	4701i	bizhub	Yes	No	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	4051i	bizhub	Yes	No	No	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	C4051i	bizhub	Yes	No	Yes	Yes	No	No		Yes	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	C3301i	bizhub	No	No	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	Yes	Yes	Yes	Yes
Konica Minolta	C3321i	bizhub	Yes	No	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes
Fuji Xerox	ApeosPort-VII CP4422	ApeosPort-VII	No	No	Yes	Yes	No	No	FUJI-XEROX-PRN-COL-A4-DUP	Yes	Yes	Yes	There is a 3 seconds timeout after print.	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort Print　C4570 System: 20.6.17 Controller ROM: 1.5.3 IOT ROM: 72.6.0 Panel ROM: 240.109.18 Boot ROM: 1.0.80 SJFI: 5.0.0 SSMI: 2.104.0 Contents: 4.9.5 Plugin: 4.9.3 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Brother	MFC-L9670CDN		Yes	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-L9635CDN		Yes	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-L9630CDN		Yes	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	Ysoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Brother	MFC-L9610CDN		Yes	No	No	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-L6902DW		Yes	No	No	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-L5755DW		Yes	No	No	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-L5750DW		Yes	No	No	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-L5702DW		Yes	No	No	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-L5700DW		Yes	No	No	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J7600CDW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J7500CDW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J6999CDW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J6997CDW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J6957DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J6955DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J6935DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J6930DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J6730DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J6580CDW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J6535DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J6530DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J5955DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J5930DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J5830DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J5730DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J5335DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J5330DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J3930DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J3530DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J2730DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-J2330DW		No	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-EX670W		Yes	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	MFC-EX670		Yes	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	HL-L9470CDN		No	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	HL-L9430CDN		No	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	HL-L9410CDN		No	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	HL-L8360CDWT		No	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	HL-L6402DW		No	No	No	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	HL-L6400DWT		No	No	No	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	HL-J7010CDW		No	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	HL-J6010DW		No	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	HL-J6000CDW		No	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No	Printer Only
Brother	HL-EX470W		No	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	DCP-L5652DN		Yes	No	No	Yes	No	No		No	No	Yes		No	No	No	No	No	No	No	No
Brother	DCP-L5602DN		Yes	No	No	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	DCP-L5600DN		Yes	No	No	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Brother	DCP-L5502DN		Yes	No	No	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	No
Fuji Xerox	ApeosPort-VI C2271	ApeosPort-VI	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VI C2271(APAC model): Controller ROM: 1.1.11 SJFI: 3.10.0 SSMI: 1.26.1 Plugin: 1.1.5 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort Print C3570	ApeosPort Print	No	Yes	Yes	Yes	No	No	FUJI-XEROX-PRN-COL-A4-DUP	Yes	Yes	Yes	There is a 3 seconds timeout after print. ApeosPort Print C4570 does not have the Large paper size counter and A3 is accounted as A4.	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort Print　C4570 System: 20.6.17 Controller ROM: 1.5.3 IOT ROM: 72.6.0 Panel ROM: 240.109.18 Boot ROM: 1.0.80 SJFI: 5.0.0 SSMI: 2.104.0 Contents: 4.9.5 Plugin: 4.9.3 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Konica Minolta	267	bizhub	Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Recommended latest firmware (above G00-24). To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
HP	Color LaserJet Enterprise MFP M578		Yes	No	Yes	Yes	Yes	No	HP-MFP-COL-A4-M475	No	No	No	Recommended driver: HP-MFP-COL-A4-M475 Limitations: Counters for copy and print are shared. When the device runs out of paper during print/copy, jobs are accounted after the paper is refilled. There is a 5 seconds timeout after copy. Blocking interface limitations: Only copy function can be blocked via FIH port.	Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 5 MU39 and later recommended YSoft SafeQ 6 MU19 and later recommended USB reader currently supported with firmware bundle 4.6.0.1 and later
Konica Minolta	4700i	bizhub	No	No	No	Yes	Yes	No	MINOLTA-PRN-BW-A4-4700i	Yes	Yes	Yes	There is a 3 seconds timeout after print.	Yes	Yes	No	Yes	No	No	Yes	Yes	Tested ROM version ACTA0Y0-F000-GX1-19(00) General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Native Terminal) "Card and PIN or Username/password" authentication method shows duplicate instruction on the interface when the device is set in European languages (Defect SBT-2134). (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value. LD device from YSoft SafeQ 6 Build 55
Konica Minolta	C226i	bizhub	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	Yes	Yes	Yes	MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	No	No	Yes	Yes	Tested ROM version C287i Japan model - SafeQ6: ACM10Y0-0100-G00-18 C257i EU model - SafeQ5: ACM10Y0-0100-G00-16 General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. (Browser Terminal) The print job preview is not loaded in the job detail information page, the preview layout is randomly broken, connection with the server fails after job preview dispaly attemp and the browser is closed. To workaround "connection failure", "preview-enabled" shall be disabled. Or use the NATIVE OpenAPI Terminal(LIMIT-500) SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Native Terminal) "Card and PIN or Username/password" authentication method shows duplicate instruction on the interface when the device is set in European languages (Defect SBT-2134). (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Konica Minolta	C266i	bizhub	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	Yes	Yes	Yes	MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	No	No	Yes	Yes	Tested ROM version C287i Japan model - SafeQ6: ACM10Y0-0100-G00-18 C257i EU model - SafeQ5: ACM10Y0-0100-G00-16 General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. (Browser Terminal) The print job preview is not loaded in the job detail information page, the preview layout is randomly broken, connection with the server fails after job preview dispaly attemp and the browser is closed. To workaround "connection failure", "preview-enabled" shall be disabled. Or use the NATIVE OpenAPI Terminal(LIMIT-500) SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Native Terminal) "Card and PIN or Username/password" authentication method shows duplicate instruction on the interface when the device is set in European languages (Defect SBT-2134). (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Konica Minolta	C286i	bizhub	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	No	No	MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	No	No	Yes	Yes	Tested ROM version C287i Japan model - SafeQ6: ACM10Y0-0100-G00-18 C257i EU model - SafeQ5: ACM10Y0-0100-G00-16 General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. (Browser Terminal) The print job preview is not loaded in the job detail information page, the preview layout is randomly broken, connection with the server fails after job preview dispaly attemp and the browser is closed. To workaround "connection failure", "preview-enabled" shall be disabled. Or use the NATIVE OpenAPI Terminal(LIMIT-500) SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Native Terminal) "Card and PIN or Username/password" authentication method shows duplicate instruction on the interface when the device is set in European languages (Defect SBT-2134). (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Konica Minolta	C227i	bizhub	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	Yes	Yes	Yes	MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	No	No	Yes	Yes	Tested ROM version C287i Japan model - SafeQ6: ACM10Y0-0100-G00-18 C257i EU model - SafeQ5: ACM10Y0-0100-G00-16 General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. (Browser Terminal) The print job preview is not loaded in the job detail information page, the preview layout is randomly broken, connection with the server fails after job preview dispaly attemp and the browser is closed. To workaround "connection failure", "preview-enabled" shall be disabled. Or use the NATIVE OpenAPI Terminal(LIMIT-500) SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Native Terminal) "Card and PIN or Username/password" authentication method shows duplicate instruction on the interface when the device is set in European languages (Defect SBT-2134). (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Konica Minolta	C257i	bizhub	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	Yes	Yes	Yes	MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	No	No	Yes	Yes	Tested ROM version C287i Japan model - SafeQ6: ACM10Y0-0100-G00-18 C257i EU model - SafeQ5: ACM10Y0-0100-G00-16 General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. (Browser Terminal) The print job preview is not loaded in the job detail information page, the preview layout is randomly broken, connection with the server fails after job preview dispaly attemp and the browser is closed. To workaround "connection failure", "preview-enabled" shall be disabled. Or use the NATIVE OpenAPI Terminal(LIMIT-500) SafeQ6 (Native TE only) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Native TE) "Card and PIN or Username/password" authentication method shows duplicate instruction on the interface when the device is set in European languages (Defect SBT-2134). (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Konica Minolta	C287i	bizhub	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	Yes	Yes	Yes	MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	No	No	Yes	Yes	Tested ROM version C287i Japan model - SafeQ6: ACM10Y0-0100-G00-18 C257i EU model - SafeQ5: ACM10Y0-0100-G00-16 General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. (Browser Terminal) The print job preview is not loaded in the job detail information page, the preview layout is randomly broken, connection with the server fails after job preview dispaly attemp and the browser is closed. To workaround "connection failure", "preview-enabled" shall be disabled. Or use the NATIVE OpenAPI Terminal(LIMIT-500) SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Native Terminal) "Card and PIN or Username/password" authentication method shows duplicate instruction on the interface when the device is set in European languages (Defect SBT-2134). (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Konica Minolta	4750i	bizhub	Yes	No	No	Yes	Yes	No	MINOLTA-MFP-BW-A4-DUP-BIZHUB-4752	Yes	No	No	There is 3 second timeout after copy and print.	Yes	Yes	No	Yes	No	No	Yes	Yes	Tested ROM version ACT-90Y0-F000-GX1-19(00) General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Native Terminal) "Card and PIN or Username/password" authentication method shows duplicate instruction on the interface when the device is set in European languages (Defect SBT-2134). (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value. LD device from YSoft SafeQ 6 Build 55
Konica Minolta	4050i	bizhub	Yes	No	No	Yes	Yes	No	MINOLTA-MFP-BW-A4-DUP-BIZHUB-4752	Yes	Yes	Yes	There is 3 second timeout after copy and print.	Yes	Yes	No	Yes	No	No	Yes	Yes	Tested ROM version ACT-90Y0-F000-GX1-19(00) General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Native Terminal) "Card and PIN or Username/password" authentication method shows duplicate instruction on the interface when the device is set in European languages (Defect SBT-2134). (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value. LD device from YSoft SafeQ 6 Build 55
Konica Minolta	300i	bizhub	Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE-V3 / MINOLTA-MFP-BW-A3-XXXE-V3-M1	Yes	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-BW-A3-XXXE-V3-M1 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested ROM version SafeQ5: (360i) AC770Y-F000-G00-31 SafeQ6: (450i) AC770Y0-F000-G00-D0 General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Konica Minolta	360i	bizhub	Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE-V3 / MINOLTA-MFP-BW-A3-XXXE-V3-M1	Yes	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-BW-A3-XXXE-V3-M1 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested ROM version SafeQ5: (360i) AC770Y-F000-G00-31 SafeQ6: (450i) AC770Y0-F000-G00-D0 General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Konica Minolta	450i	bizhub	Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE-V3 / MINOLTA-MFP-BW-A3-XXXE-V3-M1	Yes	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-BW-A3-XXXE-V3-M1 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested ROM version SafeQ5: (360i) AC770Y-F000-G00-31 SafeQ6: (450i) AC770Y0-F000-G00-D0 General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Konica Minolta	C750i	bizhub	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	Yes	Yes	Yes	MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested　ROM version SAFEQ5: G00-35 SAFEQ6: G00-34 / G00-35 General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Konica Minolta	550i	bizhub	Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE-V3 / MINOLTA-MFP-BW-A3-XXXE-V3-M1	Yes	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-BW-A3-XXXE-V3-M1 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Controler ROM version AC740Y0-0100-G00-31 General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Konica Minolta	650i	bizhub	Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE-V3 / MINOLTA-MFP-BW-A3-XXXE-V3-M1	Yes	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-BW-A3-XXXE-V3-M1 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Controler ROM version AC740Y0-0100-G00-31 General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Konica Minolta	750i	bizhub	Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE-V3 / MINOLTA-MFP-BW-A3-XXXE-V3-M1	Yes	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-BW-A3-XXXE-V3-M1 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested ROM version ACV70Y0-F000-G00-35 General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Toshiba	e-STUDIO 300AC	e-STUDIO	Yes	No	Yes	Yes	No	No	TOSHIBA-MFP-COL-A4-ALLFORMATS-GENERIC	No	No	No	Scan counter starts from 1. ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Two color print/copy is accounted as full-color. Duplex print is detected from parser information. Duplex copy in NUP is accounted as simplex.	No	Yes	No	No	No	No	Yes	No	Tested FW version: Copier Firmware: TP01HD0W1505 Copier Main ROM: 440M-03 Copier Scanner ROM: 440S-05 New authentication/browser based authentication is officially supported only for SDK3.1 Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails.
Toshiba	e-STUDIO 330AC	e-STUDIO	Yes	No	Yes	Yes	No	No	TOSHIBA-MFP-COL-A4-ALLFORMATS-GENERIC	No	No	No	Scan counter starts from 1. ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Two color print/copy is accounted as full-color. Duplex print is detected from parser information. Duplex copy in NUP is accounted as simplex.	No	Yes	No	No	No	No	Yes	Yes	Tested FW version: Copier Firmware: TP01HD0W1505 Copier Main ROM: 440M-03 Copier Scanner ROM: 440S-05 SafeQ6: build 50 or newer required. With older versions, "dsSslEnabled" needs to be disabled which brings no encryption to the printer - server communication. SafeQ5: New broswer authenticatioin screen does not work. "dsSslEnabled" needs to be disabled as a workaround which brings no encryption to the printer - server communication. New authentication/browser based authentication is officially supported only for SDK3.1 Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails.
Toshiba	e-STUDIO 400AC	e-STUDIO	Yes	No	Yes	Yes	Yes	No	TOSHIBA-MFP-COL-A4-ALLFORMATS-GENERIC	No	No	No	Scan counter starts from 1. ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Two color print/copy is accounted as full-color. Duplex print is detected from parser information. Duplex copy in NUP is accounted as simplex.	No	Yes	No	No	No	No	Yes	Yes	Tested FW version: Copier Firmware: TP01HD0W1505 Copier Main ROM: 440M-03 Copier Scanner ROM: 440S-05 SafeQ6: build 50 or newer required. With older versions, "dsSslEnabled" needs to be disabled which brings no encryption to the printer - server communication. SafeQ5: New broswer authenticatioin screen does not work. "dsSslEnabled" needs to be disabled as a workaround which brings no encryption to the printer - server communication. New authentication/browser based authentication is officially supported only for SDK3.1 Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails.
Fuji Xerox	M385 z	DocuPrint	Yes	No	No	Yes	No	No	FUJI-XEROX-MFP-BW-DPM385	No	No	No	Status detection based on display messages is supported for English only.	No	No	No	No	No	No	No	No
Fuji Xerox	P388 dw	DocuPrint	No	No	No	Yes	No	No	FUJI-XEROX-PRN-BW-DPP375	No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	P385 dw	DocuPrint	No	No	No	Yes	No	No	FUJI-XEROX-PRN-BW-DPP375	No	No	No		No	No	No	No	No	No	No	No
Lexmark	XC4150		Yes	No	Yes	Yes	No	No	LEXMARK-MFP-COL-A3-X9xxde	No	No	No	Recommended driver: LEXMARK-MFP-COL-A3-X9xxde Limitations: Duplex print is detected from print job. Duplex copy is accounted as simplex copy. A3 print/copy is accounted as A4 print/copy. Device does not send accounting information during sleep mode. Status detection is supported for following device language settings: English	Yes	Yes	No	No	No	No	Yes	Yes
Lexmark	XC4140		Yes	No	Yes	Yes	No	No	LEXMARK-MFP-COL-A3-X9xxde	No	No	No	Recommended driver: LEXMARK-MFP-COL-A3-X9xxde Limitations: Duplex print is detected from print job. Duplex copy is accounted as simplex copy. A3 print/copy is accounted as A4 print/copy. Device does not send accounting information during sleep mode. Status detection is supported for following device language settings: English	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort Print C4570	ApeosPort Print	No	Yes	Yes	Yes	No	No	FUJI-XEROX-PRN-COL-A4-DUP	Yes	Yes	Yes	There is a 3 seconds timeout after print. ApeosPort Print C4570 does not have the Large paper size counter and A3 is accounted as A4.	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort Print　C4570 System: 20.6.17 Controller ROM: 1.5.3 IOT ROM: 72.6.0 Panel ROM: 240.109.18 Boot ROM: 1.0.80 SJFI: 5.0.0 SSMI: 2.104.0 Contents: 4.9.5 Plugin: 4.9.3 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	CP475 AP	DocuPrint	No	No	Yes	Yes	No	No	FUJI-XEROX-PRN-COL-A4-DUP	No	No	No	There is a 3 seconds timeout after print.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-VII CP3322	ApeosPort-VII	No	No	Yes	Yes	No	No	FUJI-XEROX-PRN-COL-A4-DUP	Yes	Yes	Yes	There is a 3 seconds timeout after print.	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort Print　C4570 System: 20.6.17 Controller ROM: 1.5.3 IOT ROM: 72.6.0 Panel ROM: 240.109.18 Boot ROM: 1.0.80 SJFI: 5.0.0 SSMI: 2.104.0 Contents: 4.9.5 Plugin: 4.9.3 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VII CP4421	ApeosPort-VII	No	No	Yes	Yes	No	No	FUJI-XEROX-PRN-COL-A4-DUP	Yes	Yes	Yes	There is a 3 seconds timeout after print.	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort Print　C4570 System: 20.6.17 Controller ROM: 1.5.3 IOT ROM: 72.6.0 Panel ROM: 240.109.18 Boot ROM: 1.0.80 SJFI: 5.0.0 SSMI: 2.104.0 Contents: 4.9.5 Plugin: 4.9.3 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort Print C5570	ApeosPort Print	No	Yes	Yes	Yes	No	No	FUJI-XEROX-PRN-COL-A4-DUP	Yes	Yes	Yes	There is a 3 seconds timeout after print. ApeosPort Print C4570 does not have the Large paper size counter and A3 is accounted as A4.	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device(AIP6) ApeosPort Print　C4570 System: 20.6.17 Controller ROM: 1.5.3 IOT ROM: 72.6.0 Panel ROM: 240.109.18 Boot ROM: 1.0.80 SJFI: 5.0.0 SSMI: 2.104.0 Contents: 4.9.5 Plugin: 4.9.3 General XCP Terminal requires FW1.1.101 or newer. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX(Maintained) when installing Terminal Embedded. SafeQ Cloud Only ApeosPort-VII Generation 2 installed with AIP7 FW with XCP v2.2.0+ and EWB v5 is supported. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Uninstall XCP Terminal requires FW1.1.13. Older FW requires the manual steps bellow. Open CentreWare Internet Services. Go to "Properties" Tab -> Security -> Authentication Configuration -> Login Type. Set to " Login Required". Apply -> Reboot After rebooting, Delete a device on SafeQ 6 Management Interface. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Konica Minolta	C650i	bizhub	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Controler ROM version AA7N0Y0-0100-G00-2B(00) General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Konica Minolta	C550i	bizhub	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Controler ROM version AA7N0Y0-0100-G00-2B(00) General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Konica Minolta	C450i	bizhub	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Controler ROM version AA7N0Y0-0100-G00-2B(00) General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Toshiba	e-STUDIO 2822AF	e-STUDIO	Yes	Yes	No	Yes	Yes	No	TOSHIBA-MFP-BW-A3-1CLICK-NODUP, TOSHIBA-MFP-BW-A3-2CLICK-NODUP	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copyis accounted as simplex. Driver can be set for offline copy accounting. There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. TOSHIBA-MFP-BW-A3-1CLICK-NODUP This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-2CLICK-NODUP This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 2822AM	e-STUDIO	Yes	No	Yes	Yes	Yes	No	TOSHIBA-MFP-BW-A3-1CLICK-NODUP, TOSHIBA-MFP-BW-A3-2CLICK-NODUP	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copyis accounted as simplex. Driver can be set for offline copy accounting. There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. TOSHIBA-MFP-BW-A3-1CLICK-NODUP This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-2CLICK-NODUP This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	No	No
Aurora	AD400MNF		Yes	No	No	Yes	No	No	BROTHER-MFP-BW-A4-8500	No	No	No	Recommended driver: BROTHER-MFP-BW-A4-8500 Limitations: Status detection during scan is not supported.	No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 Build 41 is required to install Embedded Terminal to Aurora AD400MNF. FW version bellow or newer supporting BSI is required to install Embedded Terminal. Main Firmware Version: A Sub1 Firmware Version: 1.00 Terminal type must be "Embedded Terminal for Brother", but NOT "Embedded Terminal for Aurora". Scan workflows' setting "Sides -> Duplex" is not supported for Scanning from ADF. Scan does not start if Duplex is set and papers are set in ADF. (Device FW limitation. Release of the new FW with improvement is planned by the end of March 2020.) Rule Base Engine "Watermark" does not work with AD400MNF printer driver which generates the proprietary command. Use YSF Universal Print Driver instead if you want to use Watermark.
Fuji Xerox	DocuPrint C5155 d	DocuPrint	No	Yes	Yes	Yes	No	No	FUJI-XEROX-PRN-COL-A3	No	No	No	There is a 3 seconds timeout after print.	No	No	No	No	No	No	No	No
Develop	ineo+ 4050i		Yes	No	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A4-C3350i	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A4-C3350i Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used.	Yes	Yes	No	No	No	No	Yes	Yes	Common Limitations: MFD's new UI(Basic UI) mode has a bug in controlling access right for 1/2 colors copy. Despite no-access right for color, 1/2 colors copy can be initiated which however ends up in the error when the MFD tries to start copying. Classic UI does not have this issue. SafeQ5 Logout by card does not work.
Develop	ineo+ 3350i		Yes	No	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A4-C3350i	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A4-C3350i Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used.	Yes	Yes	No	No	No	No	Yes	Yes	Common Limitations: MFD's new UI(Basic UI) mode has a bug in controlling access right for 1/2 colors copy. Despite no-access right for color, 1/2 colors copy can be initiated which however ends up in the error when the MFD tries to start copying. Classic UI does not have this issue. SafeQ 5 Logout by card does not work.
Develop	ineo+ 360i		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3 / MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	No	No	Yes	Yes	Tested Controler ROM version AA2J0Y0-0100-G00-23(00) Common for SafeQ5 and SafeQ6(MFD limitation with the tested FW version) MFD's new UI(Basic UI) mode has a bug in controlling access right for 1/2 colors copy. Despite no-access right for color, 1/2 colors copy can be initiated which however ends up in the error when the MFD tries to start copying. This bug will be fixed by IT6v2.0 mass-production FW that is scheduled for release in early October. Classic UI does not have this issue. When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. When using SafeQ6 Gen2 terminal, certificate validation shall be disabled in the MFD or the MFD loops the certificate validation message on the browser on logout attempt. Or the solution is to create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Termianl server default certificate does not have SAN value and cannot be trusted so the behavior above occurs. SafeQ5 (Native TE only) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser TE) Auto logout by user defined time out only logges out a user from the SQ application. A user needs to pres MFD's logout button to logout. Logout by card requires DIP SW value change. Please ask KM internally for DIP SW value. SafeQ6 (Native TE only) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) Certificate validation shall be disabled or the MFD loops showing certificate validation message and behaves strangely when trying to logout. Registering a certificate from the MFD's browser cannot register the cert. Uploading a cert from the administration web also does not solve this behavior Logout by card requires DIP SW value change. Please ask KM internally for DIP SW value.
Develop	ineo+ 300i		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3 / MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	No	No	Yes	Yes	Tested Controler ROM version AA2J0Y0-0100-G00-23(00) Common for SafeQ5 and SafeQ6(MFD limitation with the tested FW version) MFD's new UI(Basic UI) mode has a bug in controlling access right for 1/2 colors copy. Despite no-access right for color, 1/2 colors copy can be initiated which however ends up in the error when the MFD tries to start copying. This bug will be fixed by IT6v2.0 mass-production FW that is scheduled for release in early October. Classic UI does not have this issue. When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. When using SafeQ6 Gen2 terminal, certificate validation shall be disabled in the MFD or the MFD loops the certificate validation message on the browser on logout attempt. Or the solution is to create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Termianl server default certificate does not have SAN value and cannot be trusted so the behavior above occurs. SafeQ5 (Native TE only) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser TE) Auto logout by user defined time out only logges out a user from the SQ application. A user needs to pres MFD's logout button to logout. Logout by card requires DIP SW value change. Please ask KM internally for DIP SW value. SafeQ6 (Native TE only) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) Certificate validation shall be disabled or the MFD loops showing certificate validation message and behaves strangely when trying to logout. Registering a certificate from the MFD's browser cannot register the cert. Uploading a cert from the administration web also does not solve this behavior Logout by card requires DIP SW value change. Please ask KM internally for DIP SW value.
Develop	ineo+ 250i		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3 / MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Controler ROM version AA2J0Y0-0100-G00-23(00) Common for SafeQ5 and SafeQ6(MFD limitation with the tested FW version) MFD's new UI(Basic UI) mode has a bug in controlling access right for 1/2 colors copy. Despite no-access right for color, 1/2 colors copy can be initiated which however ends up in the error when the MFD tries to start copying. This bug will be fixed by IT6v2.0 mass-production FW that is scheduled for release in early October. Classic UI does not have this issue. When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. When using SafeQ6 Gen2 terminal, certificate validation shall be disabled in the MFD or the MFD loops the certificate validation message on the browser on logout attempt. Or the solution is to create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Termianl server default certificate does not have SAN value and cannot be trusted so the behavior above occurs. SafeQ5 (Native TE only) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser TE) Auto logout by user defined time out only logges out a user from the SQ application. A user needs to pres MFD's logout button to logout. Logout by card requires DIP SW value change. Please ask KM internally for DIP SW value. SafeQ6 (Native TE only) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) Certificate validation shall be disabled or the MFD loops showing certificate validation message and behaves strangely when trying to logout. Registering a certificate from the MFD's browser cannot register the cert. Uploading a cert from the administration web also does not solve this behavior Logout by card requires DIP SW value change. Please ask KM internally for DIP SW value.
Develop	ineo+ 4000i		No	No	Yes	Yes	No	No	MINOLTA-PRN-COL-A4-C3300	No	Yes	Yes	Recommended driver: MINOLTA-PRN-COL-A4-C3300 Limitations: There is a 3 seconds timeout after print. Each 2 colors print is accounted as a full-color print.	Yes	Yes	No	No	No	No	Yes	Yes	Device has limited OpenAPI - Application icon is not visible, can be added manually via web interface of the device. Minimum required firmware: GC1-73 Scan application is not supported.
Develop	ineo+ 3300i		No	No	Yes	Yes	No	No	MINOLTA-PRN-COL-A4-C3300	No	Yes	Yes	Recommended driver: MINOLTA-PRN-COL-A4-C3300 Limitations: There is a 3 seconds timeout after print. Each 2 colors print is accounted as a full-color print.	Yes	Yes	No	No	No	No	Yes	Yes	Device has limited OpenAPI - Application icon is not visible, can be added manually via web interface of the device. Minimum required firmware: GC1-73 Scan application is not supported.
Fuji Xerox	DocuCentre-VI C7771	DocuCentre-VI	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	DocuCentre-VI C6671	DocuCentre-VI	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	DocuCentre-VI C5571	DocuCentre-VI	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	DocuCentre-VI C4471	DocuCentre-VI	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	DocuCentre-VI C3371	DocuCentre-VI	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	C3370	DocuCentre-VI	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	DocuCentre-C2271	DocuCentre-VI	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 2020C		Yes	Yes	Yes	Yes	No	No	TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK, TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 2829A		Yes	Yes	No	No	No	No	TOSHIBA-MFP-BW-A3-1CLICK-NODUP, TOSHIBA-MFP-BW-A3-2CLICKS-NODUP	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy is accounted as simplex. Driver can be set for offline copy accounting. There is 3 seconds timeout after print/copy. Counter difference may occur when printing is interrupted. TOSHIBA-MFP-BW-A3-1CLICK-NODUP This driver is for "Large paper=1click" counter MFD setting. TOSHIBA-MFP-BW-A3-2CLICKS-NODUP This driver is for "Large paper=2clickS" counter MFD setting.	No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 2823AM		Yes	No	No	Yes	No	No	TOSHIBA-MFP-BW-A3-1CLICK-NODUP, TOSHIBA-MFP-BW-A3-2CLICKS-NODUP	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy is accounted as simplex. Driver can be set for offline copy accounting. There is 3 seconds timeout after print/copy. Counter difference may occur when printing is interrupted. TOSHIBA-MFP-BW-A3-1CLICK-NODUP This driver is for "Large paper=1click" counter MFD setting. TOSHIBA-MFP-BW-A3-2CLICKS-NODUP This driver is for "Large paper=2clickS" counter MFD setting.	No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 2523AD		Yes	Yes	No	Yes	No	No	TOSHIBA-MFP-BW-A3-1CLICK-NODUP, TOSHIBA-MFP-BW-A3-2CLICKS-NODUP	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy is accounted as simplex. Driver can be set for offline copy accounting. There is 3 seconds timeout after print/copy. Counter difference may occur when printing is interrupted. TOSHIBA-MFP-BW-A3-1CLICK-NODUP This driver is for "Large paper=1click" counter MFD setting. TOSHIBA-MFP-BW-A3-2CLICKS-NODUP This driver is for "Large paper=2clickS" counter MFD setting.	No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 2523A		Yes	Yes	No	No	No	No	TOSHIBA-MFP-BW-A3-1CLICK-NODUP, TOSHIBA-MFP-BW-A3-2CLICKS-NODUP	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy is accounted as simplex. Driver can be set for offline copy accounting. There is 3 seconds timeout after print/copy. Counter difference may occur when printing is interrupted. TOSHIBA-MFP-BW-A3-1CLICK-NODUP This driver is for "Large paper=1click" counter MFD setting. TOSHIBA-MFP-BW-A3-2CLICKS-NODUP This driver is for "Large paper=2clickS" counter MFD setting.	No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 3018A	e-STUDIO	Yes	Yes	No	Yes	Yes	No	TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2-T3, TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2-T3	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2-T3 This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2-T3 This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	Yes	Tested FW version e-STUDIO 4518A (SafeQ5) Copier Firmware: TG01HDW1124J Copier Main ROM: 120M-02 Copier Scanner ROM: 100S-03 e-STUDIO 4518A(SafeQ6) Copier Firmware: TG01HD0W1210 Copier Main ROM: 120M-05 Copier Scanner ROM: 100S-03 New authentication/Browser based authentication is not supported. Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails.
Toshiba	e-STUDIO 2018A	e-STUDIO	Yes	Yes	No	Yes	Yes	No	TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2-T3, TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2-T3	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2-T3 This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2-T3 This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	Yes	Tested FW version e-STUDIO 4518A (SafeQ5) Copier Firmware: TG01HDW1124J Copier Main ROM: 120M-02 Copier Scanner ROM: 100S-03 e-STUDIO 4518A(SafeQ6) Copier Firmware: TG01HD0W1210 Copier Main ROM: 120M-05 Copier Scanner ROM: 100S-03 New authentication/Browser based authentication is not supported. Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails.
Toshiba	e-STUDIO 8518A	e-STUDIO	Yes	Yes	No	Yes	Yes	No	TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2, TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2 This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2 This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 7518A	e-STUDIO	Yes	Yes	No	Yes	Yes	No	TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2, TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2 This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2 This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 6518A	e-STUDIO	Yes	Yes	No	Yes	Yes	No	TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2, TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2 This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2 This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 5518A	e-STUDIO	Yes	Yes	No	Yes	Yes	No	TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2, TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2 This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2 This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 7516AC	e-STUDIO	Yes	Yes	Yes	Yes	Yes	No	TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK, TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	Yes	Tested FW version: Copier Firmware: TE01HD0W1201F Copier Main ROM: 130M-02 Copier Scanner ROM: 100S-03 New authentication/Browser based authentication is not supported. Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails.
Toshiba	e-STUDIO 6516AC	e-STUDIO	Yes	Yes	Yes	Yes	Yes	No	TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK, TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	Yes	Tested FW version: Copier Firmware: TE01HD0W1201F Copier Main ROM: 130M-02 Copier Scanner ROM: 100S-03 New authentication/Browser based authentication is not supported. Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails.
Toshiba	e-STUDIO 5516AC	e-STUDIO	Yes	Yes	Yes	Yes	Yes	No	TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK, TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	Yes	Tested FW version: Copier Firmware: TE01HD0W1201F Copier Main ROM: 130M-02 Copier Scanner ROM: 100S-03 New authentication/Browser based authentication is not supported. Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails.
Fuji Xerox	DocuPrint 4408 d	DocuPrint	No	No	No	Yes	No	No	FUJI-XEROX-PRN-BW-DP-3205D	No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	DocuPrint 3508 d	DocuPrint	No	No	No	Yes	No	No	FUJI-XEROX-PRN-BW-DP-3205D	No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	DocuPrint 3208 d	DocuPrint	No	No	No	Yes	No	No	FUJI-XEROX-PRN-BW-DP-3205D	No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	DocuPrint 4405 d	DocuPrint	No	No	No	Yes	No	No	FUJI-XEROX-PRN-BW-DP-3205D	No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	DocuPrint 3505 d	DocuPrint	No	No	No	Yes	No	No	FUJI-XEROX-PRN-BW-DP-3205D	No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	DocuPrint 3205 d	DocuPrint	No	No	No	Yes	No	No	FUJI-XEROX-PRN-BW-DP-3205D	No	No	No		No	No	No	No	No	No	No	No
Ricoh	MP 3055		Yes	Yes	No	Yes	Yes	No	RICOH-MFP-BW-A3-2553	No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Konica Minolta	bizhub 4000i	bizhub	No	No	No	Yes	No	No	MINOLTA-PRN-BW-A4-4000	No	Yes	Yes	Recommended driver: MINOLTA-PRN-BW-A4-4000 Limitations: If device runs out of paper during print/copy, jobs are accounted after the paper is refilled.	No	No	No	Yes	No	No	No	No	LD device from YSoft SafeQ 6 Build 41 The model is compatible with the Embedded Terminal for Konica Minolta BSI Build 75 is required to use the Embedded Terminal for Konica Minolta BSI
Konica Minolta	5000i	bizhub	No	No	No	Yes	No	No	MINOLTA-PRN-BW-A4-4000	No	Yes	Yes	Recommended driver: MINOLTA-PRN-BW-A4-4000 Limitations: If device runs out of paper during print/copy, jobs are accounted after the paper is refilled.	No	Yes	No	Yes	No	No	No	Yes	LD device from YSoft SafeQ 6 Build 41 The model is compatible with the Embedded Terminal for Konica Minolta BSI Build 75 is required to use the Embedded Terminal for Konica Minolta BSI
Konica Minolta	5020i	bizhub	Yes	No	No	Yes	No	No	MINOLTA-MFP-BW-A4-4020	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A4-4020 Limitations: Status detection during scan is not supported. If device runs out of paper during print/copy, jobs are accounted after the paper is refilled. All paper trays have to have some paper present.	No	Yes	No	Yes	No	No	No	Yes	LD device from YSoft SafeQ 6 Build 41 The model is compatible with the Embedded Terminal for Konica Minolta BSI Build 75 is required to use the Embedded Terminal for Konica Minolta BSI
Konica Minolta	4020i	bizhub	Yes	No	No	Yes	No	No	MINOLTA-MFP-BW-A4-4020	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A4-4020 Limitations: Status detection during scan is not supported. If device runs out of paper during print/copy, jobs are accounted after the paper is refilled. All paper trays have to have some paper present.	No	Yes	No	Yes	No	No	No	Yes	LD device from YSoft SafeQ 6 Build 41 The model is compatible with the Embedded Terminal for Konica Minolta BSI Build 75 is required to use the Embedded Terminal for Konica Minolta BSI
Pantum	M7200		Yes	No	No	Yes	No	No	PANTUM-MFP-BW-A4	No	No	No	Recommended driver: PANTUM-MFP-BW-A4 Limitations: Counters for copy and print are shared. Status message is not available. Duplex is detected from job information by job parser.	No	No	No	No	No	No	No	No
Pantum	M7100		Yes	No	No	Yes	No	No	PANTUM-MFP-BW-A4	No	No	No	Recommended driver: PANTUM-MFP-BW-A4 Limitations: Counters for copy and print are shared. Status message is not available. Duplex is detected from job information by job parser.	No	No	No	No	No	No	No	No
Xerox	B1025		Yes	Yes	No	Yes	No	No	XEROX-MFP-BW-A3-WC58XX-V3	No	Yes	Yes	Recommended driver: XEROX-MFP-BW-A3-WC58XX-V3 Limitations: For WC52xx: Please use this driver if using FW version equal or newer than 1.207.129 There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy. Counter difference may occur when device runs out of paper during printing.	No	No	No	No	No	No	No	No
HP	552dw	PageWide Pro	No	No	Yes	Yes	No	No	HP-PRN-COL-A4-M451DN	No	No	No	Recommended driver: HP-PRN-COL-A4-M451DN Limitations: When the device runs out of paper during print, jobs are accounted after the paper is refilled.	No	No	No	No	No	No	No	No
HP	452dw	PageWide Pro	No	No	Yes	Yes	No	No	HP-PRN-COL-A4-M451DN	No	No	No	Recommended driver: HP-PRN-COL-A4-M451DN Limitations: When the device runs out of paper during print, jobs are accounted after the paper is refilled.	No	No	No	No	No	No	No	No
HP	452dn	PageWide Pro	No	No	Yes	Yes	No	No	HP-PRN-COL-A4-M451DN	No	No	No	Recommended driver: HP-PRN-COL-A4-M451DN Limitations: When the device runs out of paper during print, jobs are accounted after the paper is refilled.	No	No	No	No	No	No	No	No
Konica Minolta	bizhub 226i		Yes	Yes	No	Yes	No	No	MINOLTA-MFP-BW-A3-XXXE-V3	Yes	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2.	Yes	Yes	No	No	No	No	Yes	Yes	Logout by card requires DIP SW value change. Please ask KM internally for DIP SW value.
Konica Minolta	246i	bizhub	Yes	Yes	No	Yes	No	No	MINOLTA-MFP-BW-A3-XXXE-V3	Yes	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2.	Yes	Yes	No	No	No	No	Yes	Yes	Logout by card requires DIP SW value change. Please ask KM internally for DIP SW value.
Konica Minolta	266i	bizhub	Yes	Yes	No	Yes	No	No	MINOLTA-MFP-BW-A3-XXXE-V3	Yes	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Logout by card requires DIP SW value change. Please ask KM internally for DIP SW value.
Konica Minolta	306i	bizhub	Yes	Yes	No	Yes	No	No	MINOLTA-MFP-BW-A3-XXXE-V3	Yes	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2.	Yes	Yes	No	No	No	No	Yes	Yes	Logout by card requires DIP SW value change. Please ask KM internally for DIP SW value.
Toshiba	e-STUDIO 5018A	e-STUDIO	Yes	Yes	No	Yes	Yes	No	TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2-T3, TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2-T3	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2-T3 This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2-T3 This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	Yes	Tested FW version e-STUDIO 4518A (SafeQ5) Copier Firmware: TG01HDW1124J Copier Main ROM: 120M-02 Copier Scanner ROM: 100S-03 e-STUDIO 4518A(SafeQ6) Copier Firmware: TG01HD0W1210 Copier Main ROM: 120M-05 Copier Scanner ROM: 100S-03 New authentication/Browser based authentication is not supported. Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails.
Toshiba	e-STUDIO 4518A	e-STUDIO	Yes	Yes	No	Yes	Yes	No	TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2-T3, TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2-T3	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2-T3 This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2-T3 This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	Yes	Tested FW version e-STUDIO 4518A (SafeQ5) Copier Firmware: TG01HDW1124J Copier Main ROM: 120M-02 Copier Scanner ROM: 100S-03 e-STUDIO 4518A(SafeQ6) Copier Firmware: TG01HD0W1210 Copier Main ROM: 120M-05 Copier Scanner ROM: 100S-03 New authentication/Browser based authentication is not supported. Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails.
Toshiba	e-STUDIO 3518A	e-STUDIO	Yes	Yes	No	Yes	Yes	No	TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2-T3, TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2-T3	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2-T3 This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2-T3 This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	Yes	Tested FW version e-STUDIO 4518A (SafeQ5) Copier Firmware: TG01HDW1124J Copier Main ROM: 120M-02 Copier Scanner ROM: 100S-03 e-STUDIO 4518A(SafeQ6) Copier Firmware: TG01HD0W1210 Copier Main ROM: 120M-05 Copier Scanner ROM: 100S-03 New authentication/Browser based authentication is not supported. Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails.
Toshiba	e-STUDIO 2518A	e-STUDIO	Yes	Yes	No	Yes	Yes	No	TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2-T3, TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2-T3	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2-T3 This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2-T3 This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	Yes	Tested FW version e-STUDIO 4518A (SafeQ5) Copier Firmware: TG01HDW1124J Copier Main ROM: 120M-02 Copier Scanner ROM: 100S-03 e-STUDIO 4518A(SafeQ6) Copier Firmware: TG01HD0W1210 Copier Main ROM: 120M-05 Copier Scanner ROM: 100S-03 New authentication/Browser based authentication is not supported. Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails.
Fuji Xerox	DocuPrint CM318 z	DocuPrint	Yes	No	Yes	Yes	No	No	FUJI-XEROX-MFP-COL-A4-CM315	No	No	No	Scan counter starts from 1. Scan to USB is not accounted. (Only Scan transfered via network/mail is accounted). Duplex copy is accounted as simplex. Duplex print is detected from print job parser.	No	No	No	Yes	No	No	No	No
Fuji Xerox	DocuPrint CP318 dw	DocuPrint	No	No	Yes	Yes	No	No	FUJI-XEROX-PRN-COL-DP-CP405D	No	No	No	Duplex print is accounted according to parser from job information.	No	No	No	Yes	No	No	No	No
Ricoh	IM 350F		Yes	No	No	Yes	No	No	RICOH-MFP-BW-A4-DUP-501SPF	No	No	No	Recommended driver: RICOH-MFP-BW-A4-DUP-501SPF Limitations: Duplex jobs having odd number of pages can be accounted with one more page.	Yes	Yes	No	Yes	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x required Ricoh SOP Embedded terminal: - J/SDK is optional.
Ricoh	IM 430F		Yes	No	No	Yes	No	No	RICOH-MFP-BW-A4-DUP-501SPF	No	No	No	Recommended driver: RICOH-MFP-BW-A4-DUP-501SPF Limitations: Duplex jobs having odd number of pages can be accounted with one more page.	Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x required Ricoh SOP Embedded terminal: - J/SDK is optional.
Konica Minolta	C3320i	bizhub	Yes	No	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A4-C3350i	No	Yes	Yes	There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used.	Yes	Yes	No	Yes	No	No	Yes	Yes	Tested Controler ROM version AAJT0Y0-F000-G00-28 Common for SafeQ5 and SafeQ6(MFD limitation with the tested FW version) MFD's new UI(Basic UI) mode has a bug in controlling access right for 1/2 colors copy. Despite no-access right for color, 1/2 colors copy can be initiated which however ends up in the error when the MFD tries to start copying. This bug will be fixed by IT6v2.0 mass-production FW that is scheduled for release in early October. Classic UI does not have this issue. When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0 which are not enabled by default on the device. To use TLS1.1 or TLS1.2, set kmOpenApiVersion to 4-13a(default of SafeQ6). When using SafeQ6 Gen2 terminal, certificate validation shall be disabled in the MFD or the MFD loops the certificate validation message on the browser on logout attempt. Or the solution is to create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Termianl server default certificate does not have SAN value and cannot be trusted so the behavior above occurs. SafeQ5 (Native TE only) Auto logout by user defined timeout does not work. (Browser TE) Auto logout by user defined time out only logges out a user from the SQ application. A user needs to press MFD's logout button to logout. System Auto Reset shall be used instead for auto logout. Logout by card requires DIP SW value change. Please ask KM internally for DIP SW value. SafeQ6 (Native TE only) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) Certificate validation shall be disabled or the MFD loops showing certificate validation message and behaves strangely when trying to logout. Registering a certificate from the MFD's browser cannot register the cert. Uploading a cert from the administration web also does not solve this behavior Logout by card requires DIP SW value change. Please ask KM internally for DIP SW value. LD device from YSoft SafeQ 6 Build 47
Brother	HL-L9310CDW(T)		No	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Brother	MFC-J6947DW		Yes	Yes	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP. Brother Enhanced PCL driver recommended.
Fuji Xerox	P378 dw	DocuPrint	No	No	No	Yes	No	No	FUJI-XEROX-PRN-BW-DPP375	No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	P378 d	DocuPrint	No	No	No	Yes	No	No	FUJI-XEROX-PRN-BW-DPP375	No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	P375 dw	DocuPrint	No	No	No	Yes	No	No	FUJI-XEROX-PRN-BW-DPP375	No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	P375 d	DocuPrint	No	No	No	Yes	No	No	FUJI-XEROX-PRN-BW-DPP375	No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	M378 df	DocuPrint	Yes	No	No	Yes	No	No	FUJI-XEROX-MFP-BW-DPM375	No	No	No	Status detection based on display messages is supported for English, Chinese and Indonesian languages. Status detection of the error " Paper Fed" is not supported for Chinese and Indonesian languages.	No	No	No	No	No	No	No	No
Fuji Xerox	M378 d	DocuPrint	Yes	No	No	Yes	No	No	FUJI-XEROX-MFP-BW-DPM375	No	No	No	Status detection based on display messages is supported for English, Chinese and Indonesian languages. Status detection of the error " Paper Fed" is not supported for Chinese and Indonesian languages.	No	No	No	No	No	No	No	No
Fuji Xerox	M375 z	DocuPrint	Yes	No	No	Yes	No	No	FUJI-XEROX-MFP-BW-DPM375	No	No	No	Status detection based on display messages is supported for English, Chinese and Indonesian languages. Status detection of the error " Paper Fed" is not supported for Chinese and Indonesian languages.	No	No	No	No	No	No	No	No
Fuji Xerox	M375 df	DocuPrint	Yes	No	No	Yes	No	No	FUJI-XEROX-MFP-BW-DPM375	No	No	No	Status detection based on display messages is supported for English, Chinese and Indonesian languages. Status detection of the error " Paper Fed" is not supported for Chinese and Indonesian languages.	No	No	No	No	No	No	No	No
Brother	DCP-L5500DN		Yes	No	No	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 and newer Requires EAP license
Brother	DCP-L8410CDW		Yes	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP. Firmware from April 2019 and later required.
Brother	MFC-L8610CDW		Yes	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP. Firmware from April 2019 and later required.
Brother	MFC-L9570CDW/T		Yes	No	Yes	Yes	No	No		No	No	Yes		No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Konica Minolta	C4050i	bizhub	Yes	No	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A4-C3350i	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A4-C3350i Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used.	Yes	Yes	No	No	No	No	Yes	Yes	Common Limitations: MFD's new UI(Basic UI) mode has a bug in controlling access right for 1/2 colors copy. Despite no-access right for color, 1/2 colors copy can be initiated which however ends up in the error when the MFD tries to start copying. Classic UI does not have this issue. SafeQ5 Logout by card does not work.
Konica Minolta	bizhub C3350i		Yes	No	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A4-C3350i	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A4-C3350i Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used.	Yes	Yes	No	Yes	No	No	Yes	Yes	Common Limitations: MFD's new UI(Basic UI) mode has a bug in controlling access right for 1/2 colors copy. Despite no-access right for color, 1/2 colors copy can be initiated which however ends up in the error when the MFD tries to start copying. Classic UI does not have this issue. SafeQ5 Logout by card does not work. LD device from YSoft SafeQ 6 Build 47
Konica Minolta	C360i	bizhub	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Controler ROM version AA2J0Y0-0100-G00-23(00) General When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. Logout by card requires DIP SW 215 HEX 08. SafeQ5 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser Terminal) Auto logout by user defined time out only logs out a user from the SQ application. A user needs to press MFD's logout button to logout. SafeQ6 (Native Terminal) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value.
Konica Minolta	C300i	bizhub	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	No	No	Yes	Yes	Tested Controler ROM version AA2J0Y0-0100-G00-23(00) Common for SafeQ5 and SafeQ6(MFD limitation with the tested FW version) MFD's new UI(Basic UI) mode has a bug in controlling access right for 1/2 colors copy. Despite no-access right for color, 1/2 colors copy can be initiated which however ends up in the error when the MFD tries to start copying. This bug will be fixed by IT6v2.0 mass-production FW that is scheduled for release in early October. Classic UI does not have this issue. When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. When using SafeQ6 Gen2 terminal, certificate validation shall be disabled in the MFD or the MFD loops the certificate validation message on the browser on logout attempt. Or the solution is to create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Termianl server default certificate does not have SAN value and cannot be trusted so the behavior above occurs. SafeQ5 (Native TE only) Auto logout by user defined timeout does not work. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value. Logout by card requires DIP SW SW 215 HEX 08. SafeQ6 (Native TE only) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) Certificate validation shall be disabled or the MFD loops showing certificate validation message and behaves strangely when trying to logout. Registering a certificate from the MFD's browser cannot register the cert. Uploading a cert from the administration web also does not solve this behavior Logout by card requires DIP SW SW 215 HEX 08.
Konica Minolta	C250i	bizhub	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3 / MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Controler ROM version AA2J0Y0-0100-G00-23(00) Common for SafeQ5 and SafeQ6(MFD limitation with the tested FW version) MFD's new UI(Basic UI) mode has a bug in controlling access right for 1/2 colors copy. Despite no-access right for color, 1/2 colors copy can be initiated which however ends up in the error when the MFD tries to start copying. This bug will be fixed by IT6v2.0 mass-production FW that is scheduled for release in early October. Classic UI does not have this issue. When kmOpenApiVersion is set to 4.2, securityProtocolTypesForOutboundCommunication shall include SSL3.0 and/or TLS1.0 and the MFD's SSL version shall be enabled for SSL3.0 and/or TLS1.0. Older SDK does not support TLS1.1 and TLS1.2. To use TLS1.1 or TLS1.2, use 4-13a. When using SafeQ6 Gen2 terminal, certificate validation shall be disabled in the MFD or the MFD loops the certificate validation message on the browser on logout attempt. Or the solution is to create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Termianl server default certificate does not have SAN value and cannot be trusted so the behavior above occurs. SafeQ5 (Native TE only) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Browser TE) Auto logout by user defined time out only logges out a user from the SQ application. A user needs to pres MFD's logout button to logout. Logout by card requires DIP SW SW 215 HEX 08. SafeQ6 (Native TE only) Auto logout by user defined timeout does not work. System Auto Reset shall be used instead for auto logout. (Gen2 browser) When using SafeQ6 Gen2 terminal, it is recommended to disable certificate validation or create a custom certificate having SAN(Subject Alternative Name) and use it instead and register to bizhub. Terminal server default certificate does not have SAN value. Logout by card requires DIP SW SW 215 HEX 08.
HP	PageWide Enterprise Color 556		No	No	Yes	Yes	No	No	HP-PRN-COL-A4-556DN	No	No	No		Yes	Yes	No	No	No	No	No	Yes
Konica Minolta	C3300i	bizhub	No	No	Yes	Yes	No	No	MINOLTA-PRN-COL-A4-C3300	No	Yes	Yes	Recommended driver: MINOLTA-PRN-COL-A4-C3300 Limitations: There is a 3 seconds timeout after print. Each 2 colors print is accounted as a full-color print.	Yes	Yes	No	Yes	Yes	Yes	Yes	Yes	Device has limited OpenAPI - Application icon is not visible, can be added manually via web interface of the device. Minimum required firmware: GC1-73 Scan application is not supported. LD device from YSoft SafeQ 6 Build 41 Since GC1-7B it is possible to add YSoft SafeQ application to device panel manually after installation. The icon will stay in place even after reinstallation of terminal.
Konica Minolta	bizhub C4000i	bizhub	No	No	Yes	Yes	No	No	MINOLTA-PRN-COL-A4-C3300	Yes	Yes	Yes	Recommended driver: MINOLTA-PRN-COL-A4-C3300 Limitations: There is a 3 seconds timeout after print. Each 2 colors print is accounted as a full-color print.	Yes	Yes	No	Yes	Yes	Yes	Yes	Yes	Device has limited OpenAPI - Application icon is not visible, can be added manually via web interface of the device. Minimum required firmware: GC1-73 Scan application is not supported. LD device from YSoft SafeQ 6 Build 41
HP	Color LaserJet Managed Flow E57540c		Yes	No	Yes	Yes	Yes	No	HP-MFP-COL-A4-M475	No	No	No	Recommended driver: HP-MFP-COL-A4-M475 Limitations: Counters for copy and print are shared. When the device runs out of paper during print/copy, jobs are accounted after the paper is refilled. There is a 5 seconds timeout after copy. Blocking interface limitations: Only copy function can be blocked via FIH port.	Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 5 MU39 and later recommended YSoft SafeQ 6 MU19 and later recommended USB reader currently supported with firmware bundle 4.6.0.1 and later
HP	Color LaserJet Managed E57540dn		Yes	No	Yes	Yes	Yes	No	HP-MFP-COL-A4-M475	No	No	No	Recommended driver: HP-MFP-COL-A4-M475 Limitations: Counters for copy and print are shared. When the device runs out of paper during print/copy, jobs are accounted after the paper is refilled. There is a 5 seconds timeout after copy. Blocking interface limitations: Only copy function can be blocked via FIH port.	Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 5 MU39 and later recommended YSoft SafeQ 6 MU19 and later recommended USB reader currently supported with firmware bundle 4.6.0.1 and later
Brother	MFC-8535DN		Yes	No	No	Yes	No	No	BROTHER-MFP-BW-A4-8500	No	Yes	Yes	Recommended driver: BROTHER-MFP-BW-A4-8500 Limitations: Status detection during scan is not supported.	No	No	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP. Brother Enhanced PCL driver recommended.
Brother	MFC-8530DN		Yes	No	No	Yes	No	No	BROTHER-MFP-BW-A4-8500	No	Yes	Yes	Recommended driver: BROTHER-MFP-BW-A4-8500 Limitations: Status detection during scan is not supported.	No	No	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP. Brother Enhanced PCL driver recommended.
Brother	HL-5595DN		No	No	No	Yes	No	No	BROTHER-PRN-BW-A4-HLS7000DN-V2	No	Yes	Yes	Recommended driver: BROTHER-PRN-BW-A4-HLS7000DN-V2 Limitations: There is a 1.5 second timeout after print. n-standard paper size prints are not accounted.	No	No	No	No	No	No	No	No
Sharp	MX-M5070N	B-PHOENIX	Yes	Yes	No	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	No	Yes
Konica Minolta	6136P	AccurioPress	No	Yes	No	Yes	No	No	MINOLTA-PRN-BW-A3-6120	No	Yes	Yes	Recommended driver: MINOLTA-PRN-BW-A3-6120 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. This driver is for "total counter mode 2" MFD setting.	No	No	No	No	No	No	No	No
Konica Minolta	C6085	AccurioPress	No	Yes	Yes	Yes	Yes	No	MINOLTA-PRN-COL-A3-C6100-M1	No	Yes	Yes	Recommended driver: MINOLTA-PRN-COL-A3-C6100-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. This driver is for "total counter mode 1" MFD setting. For device without PF-711 unit.	No	No	No	No	No	No	No	No
Konica Minolta	C6100	AccurioPress	No	Yes	Yes	Yes	Yes	No	MINOLTA-PRN-COL-A3-C6100-M1	No	Yes	Yes	Recommended driver: MINOLTA-PRN-COL-A3-C6100-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. This driver is for "total counter mode 1" MFD setting. For device without PF-711 unit.	No	No	No	No	No	No	No	No
Konica Minolta	C83hc	AccurioPress	No	Yes	Yes	No	No	No	MINOLTA-PRN-COL-A3-C1070P	No	No	No	Recommended driver: MINOLTA-PRN-COL-A3-C1070P Limiations: There is a 3 seconds timeout after print. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. C3000/C73/C83 series supporter with internal controller IC-605.	No	No	No	No	No	No	No	No
Konica Minolta	C73hc	AccurioPress	No	Yes	Yes	Yes	No	No	MINOLTA-PRN-COL-A3-C1070P	No	No	No	Recommended driver: MINOLTA-PRN-COL-A3-C1070P Limiations: There is a 3 seconds timeout after print. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. C3000/C73/C83 series supporter with internal controller IC-605.	No	No	No	No	No	No	No	No
Konica Minolta	C3080P	AccurioPress	No	Yes	Yes	Yes	No	No	MINOLTA-PRN-COL-A3-C1070P	Yes	Yes	Yes	Recommended driver: MINOLTA-PRN-COL-A3-C1070P Limiations: There is a 3 seconds timeout after print. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. C3000/C73/C83 series supporter with internal controller IC-605.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ6 GEN2 terminal is not certified. (AccurioPress Postscript driver): RBE and Finishing options are not supported. (Device limitation): Logout with card does not initiate logout (Device limitation): When the device language is in single byte languages(English), billing code description in multibyte language are not displayed. (Device limitation): Sleep mode is not supported by the device, but Power Save mode and Shut off mode. Shut off mode: Does not supply power to card reader, so card swipe does nothing. Power Save mode: When card swipe occurs, login process is triggered on the backgroud and user is already logged in, however Panel does not turn on. User need to manually press HW Power Save button to turn on the panel. (Device limitation): Authentication cache is not supported. Authentication by integrated keypad is not supported.
Konica Minolta	C3070P	AccurioPress	No	Yes	Yes	Yes	No	No	MINOLTA-PRN-COL-A3-C1070P	No	No	No	Recommended driver: MINOLTA-PRN-COL-A3-C1070P Limiations: There is a 3 seconds timeout after print. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. C3000/C73/C83 series supporter with internal controller IC-605.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ6 GEN2 terminal is not certified. (AccurioPress Postscript driver): RBE and Finishing options are not supported. (Device limitation): Logout with card does not initiate logout (Device limitation): When the device language is in single byte languages(English), billing code description in multibyte language are not displayed. (Device limitation): Sleep mode is not supported by the device, but Power Save mode and Shut off mode. Shut off mode: Does not supply power to card reader, so card swipe does nothing. Power Save mode: When card swipe occurs, login process is triggered on the backgroud and user is already logged in, however Panel does not turn on. User need to manually press HW Power Save button to turn on the panel. (Device limitation): Authentication cache is not supported. Authentication by integrated keypad is not supported.
Konica Minolta	C3070L	AccurioPrint	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. C3000 series supporter with internal controller IC-605.	Yes	Yes	No	No	No	No	Yes	Yes	Tested model and FW version Browser W A9VE0Y0-00W1-G00-20 Controller P1 A9VE0Y0-00P1-G00-20 Controller P2 A9VE001-00P2-G00-20 SafeQ6 GEN2 terminal is not certified. (AccurioPress Postscript driver): RBE and Finishing options are not supported. (Device limitation): Logout with card does not initiate logout (Device limitation): When the device language is in single byte languages(English), billing code description in multibyte language are not displayed. (Device limitation): Sleep mode is not supported by the device, but Power Save mode and Shut off mode. Shut off mode: Does not supply power to card reader, so card swipe does nothing. Power Save mode: When card swipe occurs, login process is triggered on the backgroud and user is already logged in, however Panel does not turn on. User need to manually press HW Power Save button to turn on the panel. (Device limitation): Authentication cache is not supported. Authentication by integrated keypad is not supported.
Toshiba	e-STUDIO 3015AC	e-STUDIO	Yes	Yes	Yes	Yes	Yes	No	TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK, TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	Yes	Toshiba e-Studio 3015AC was tested with FW ver TC01HD0W1140 Toshiba e-Studio 3515AC was tested with FW ver TC01HD0W1104 New authentication/Browser based authentication is not supported. Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails. Advanced finishing option is not tested. YSF Universal PCL Printer driver is not tested.
Toshiba	e-STUDIO 5015AC	e-STUDIO	Yes	Yes	Yes	Yes	Yes	No	TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK, TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	Yes	Toshiba e-Studio 3015AC was tested with FW ver TC01HD0W1140 Toshiba e-Studio 3515AC was tested with FW ver TC01HD0W1104 New authentication/Browser based authentication is not supported. Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails. Advanced finishing option is not tested. YSF Universal PCL Printer driver is not tested.
Toshiba	e-STUDIO 4515AC	e-STUDIO	Yes	Yes	Yes	Yes	Yes	No	TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK, TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	Yes	Toshiba e-Studio 3015AC was tested with FW ver TC01HD0W1140 Toshiba e-Studio 3515AC was tested with FW ver TC01HD0W1104 New authentication/Browser based authentication is not supported. Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails. Advanced finishing option is not tested. YSF Universal PCL Printer driver is not tested.
Toshiba	e-STUDIO 3515AC	e-STUDIO	Yes	Yes	Yes	Yes	Yes	No	TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK, TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	Yes	Toshiba e-Studio 3015AC was tested with FW ver TC01HD0W1140 Toshiba e-Studio 3515AC was tested with FW ver TC01HD0W1104 New authentication/Browser based authentication is not supported. Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails. Advanced finishing option is not tested. YSF Universal PCL Printer driver is not tested.
Toshiba	e-STUDIO 2515AC	e-STUDIO	Yes	Yes	Yes	Yes	Yes	No	TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK, TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	Yes	Toshiba e-Studio 3015AC was tested with FW ver TC01HD0W1140 Toshiba e-Studio 3515AC was tested with FW ver TC01HD0W1104 New authentication/Browser based authentication is not supported. Enable SSL/TLS parameter of the device shall be changed to "Accept all certificates without CA" from "Verify with imported CA certification" when installing Embedded Terminal with default Y Soft certificate or self-signed certificate, otherwise user authentication fails. Advanced finishing option is not tested. YSF Universal PCL Printer driver is not tested.
Fuji Xerox	ApeosPort-V 3070	ApeosPort-V	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-JP	No	No	No	Recommended driver: FUJI-XEROX-MFP-DCIV-XX80-JP Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Each A3 page is accounted as A4 page. When Offline copy accounting is used, each A3 page is accounted as two A4 pages. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW version 5070: Controller ROM: 1.0.12 SJFI: Version 3.7.0 SSMI: Version 1.24.0 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is supported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Canon	iR-ADV C7580i		Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iR75xx	No	No	No	Recommended driver: CANON-MFP-COL-A3-iR75xx Limitations: Counters for copy and print are shared. There is a 3 second timeout after print. There is a 3 second timeout after copy. If device runs out of paper during print/copy, counter differences may occur. Scan to USB is not accounted.	No	No	No	No	No	No	No	No
Canon	iR-ADV C7570i		Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iR75xx	No	No	No	Recommended driver: CANON-MFP-COL-A3-iR75xx Limitations: Counters for copy and print are shared. There is a 3 second timeout after print. There is a 3 second timeout after copy. If device runs out of paper during print/copy, counter differences may occur. Scan to USB is not accounted.	No	No	No	No	No	No	No	No
Canon	iR-ADV C7565i		Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iR75xx	No	No	No	Recommended driver: CANON-MFP-COL-A3-iR75xx Limitations: Counters for copy and print are shared. There is a 3 second timeout after print. There is a 3 second timeout after copy. If device runs out of paper during print/copy, counter differences may occur. Scan to USB is not accounted.	No	No	No	No	No	No	No	No
Ricoh	SP C340		No	No	Yes	Yes	No	No	RICOH-PRN-COL-A4-C440	No	No	No	Recommended driver: RICOH-PRN-COL-A4-C440 Limitations: If device runs out of paper during print/copy, jobs are accounted after the paper is refilled.	No	No	No	No	No	No	No	No
HP	LaserJet E60075x		No	No	No	Yes	No	No	HP-BW-PRT	No	No	No	Recommended driver: HP-BW-PRT Limitations: Duplex print is accounted according to parser from job information.	Yes	Yes	No	No	No	No	No	Yes	Printer only, Scan application not supported. Firmware bundle 4.6.0.1 and later required for USB reader support. 4.3 inch display required.
HP	LaserJet E60065x		No	No	No	Yes	No	No	HP-BW-PRT	No	No	No	Recommended driver: HP-BW-PRT Limitations: Duplex print is accounted according to parser from job information.	Yes	Yes	No	No	No	No	No	Yes	Printer only, Scan application not supported. Firmware bundle 4.6.0.1 and later required for USB reader support. 4.3 inch display required.
HP	LaserJet M609x		No	No	No	Yes	No	No	HP-BW-PRT	No	No	No	Recommended driver: HP-BW-PRT Limitations: Duplex print is accounted according to parser from job information.	Yes	Yes	No	No	No	No	No	Yes	Printer only, Scan application not supported. Firmware bundle 4.6.0.1 and later required for USB reader support. 4.3 inch display required.
HP	LaserJet M608x	LaserJet	No	No	No	Yes	No	No	HP-BW-PRT	No	No	No	Recommended driver: HP-BW-PRT Limitations: Duplex print is accounted according to parser from job information.	Yes	Yes	No	No	No	No	No	Yes	Printer only, Scan application not supported. Firmware bundle 4.6.0.1 and later required for USB reader support. 4.3 inch display required.
HP	PageWide Managed Color MFP E58650	PageWide	Yes	No	Yes	Yes	No	No	HP-MFP-COL-A4-586	No	No	No	Recommended driver: HP-MFP-COL-A4-586 Limitations: Counters for copy and print are shared.	Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 5 MU39 and later recommended YSoft SafeQ 6 MU19 and later recommended USB reader supported with firmware version bundle 4.6.0.1 and later.
Fuji Xerox	ApeosPort-V C3374	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	The device with following FW was tested: Cpntroller ROM: 1.2.2 SJFI: 3.10.0 SSMI: 1.25.4 Contents: 2.0.12 Plugin: 1.0.6 RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) USB card reader is suported with XCP terminal. 2nd Gen Browser terminal is not tested. When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Konica Minolta	C3070	AccurioPress	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. C3000 series supporter with internal controller IC-605.	Yes	Yes	No	No	No	No	Yes	Yes	Tested model and FW version Browser W A9VE0Y0-00W1-G00-20 Controller P1 A9VE0Y0-00P1-G00-20 Controller P2 A9VE001-00P2-G00-20 SafeQ6 GEN2 terminal is not certified. (AccurioPress Postscript driver): RBE and Finishing options are not supported. (Device limitation): Logout with card does not initiate logout (Device limitation): When the device language is in single byte languages(English), billing code description in multibyte language are not displayed. (Device limitation): Sleep mode is not supported by the device, but Power Save mode and Shut off mode. Shut off mode: Does not supply power to card reader, so card swipe does nothing. Power Save mode: When card swipe occurs, login process is triggered on the backgroud and user is already logged in, however Panel does not turn on. User need to manually press HW Power Save button to turn on the panel. (Device limitation): Authentication cache is not supported. Authentication by integrated keypad is not supported.
Konica Minolta	C3080	AccurioPress	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. C3000 series supporter with internal controller IC-605.	Yes	Yes	No	No	No	No	Yes	Yes	Tested model and FW version Browser W A9VE0Y0-00W1-G00-20 Controller P1 A9VE0Y0-00P1-G00-20 Controller P2 A9VE001-00P2-G00-20 SafeQ6 GEN2 terminal is not certified. (AccurioPress Postscript driver): RBE and Finishing options are not supported. (Device limitation): Logout with card does not initiate logout (Device limitation): When the device language is in single byte languages(English), billing code description in multibyte language are not displayed. (Device limitation): Sleep mode is not supported by the device, but Power Save mode and Shut off mode. Shut off mode: Does not supply power to card reader, so card swipe does nothing. Power Save mode: When card swipe occurs, login process is triggered on the backgroud and user is already logged in, however Panel does not turn on. User need to manually press HW Power Save button to turn on the panel. (Device limitation): Authentication cache is not supported. Authentication by integrated keypad is not supported.
Kyocera Mita	ECOSYS P5026 series		No	No	Yes	Yes	No	No	KM-KYO-PRN-C5250DN	No	No	No	Recommended driver: KM-KYO-PRN-C5250DN Limitations: English and Hungarian language support for device status. Driver accounts A4 black-and-white duplex print job as A4 black-and-white simplex print job. Driver accounts A4 color duplex print job as A4 color simplex print job.	No	No	No	No	No	No	No	No
Kyocera Mita	ECOSYS P2040 series		No	No	No	Yes	No	No	KM-PRN-BW-A4-FS4100DN	No	No	No	Recommended driver: KM-PRN-BW-A4-FS4100DN Limitations: Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 2010AC	e-STUDIO	Yes	Yes	Yes	Yes	Yes	No	TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK, TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	Yes	No	New authentication/Browser based authentication is not supported.
Toshiba	e-STUDIO 2510AC	e-STUDIO	Yes	Yes	Yes	Yes	Yes	No	TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK, TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	Yes	No	New authentication/Browser based authentication is not supported.
Toshiba	e-STUDIO 305CS		Yes	No	Yes	Yes	No	No	LEXMARK-MFP-COL-A3-X9xxde	No	No	No	Duplex print is detected from print job. Duplex copy is accounted as simplex copy. A3 print/copy is accounted as A4 print/copy. Device does not send accounting information during sleep mode. Status detection is supported for following device language settings: English, Hungarian. There is 2 second timeout after print. There is 1 second timeout after copy. Sleep mode have to be disabled (model: Lexmark CX410de).	No	No	No	No	No	No	No	No	Toshiba e-STUDIO 305CS is an OEM model of Lexmark device
Canon	iR-ADV C355iFC		Yes	No	Yes	Yes	Yes	No	CANON-MFP-COL-A4-iRC355	No	No	No	Recommended driver: CANON-MFP-COL-A4-iRC355 Limitations: If device runs out of paper during print/copy, jobs are accounted after the paper is refilled. If device runs out of paper during print/copy, counter differences may occur. There is a 2 second timeout after print. There is a 2 second timeout after copy.	No	No	No	No	No	No	No	No
Canon	iR-ADV C355		Yes	Yes	No	Yes	Yes	No	CANON-MFP-COL-A4-iRC355	No	No	No	Recommended driver: CANON-MFP-COL-A4-iRC355 Limitations: If device runs out of paper during print/copy, jobs are accounted after the paper is refilled. If device runs out of paper during print/copy, counter differences may occur. There is a 2 second timeout after print. There is a 2 second timeout after copy.	No	No	No	No	No	No	No	No
Canon	iR-ADV C355i		Yes	No	Yes	Yes	Yes	No	CANON-MFP-COL-A4-iRC355	No	No	No	Recommended driver: CANON-MFP-COL-A4-iRC355 Limitations: If device runs out of paper during print/copy, jobs are accounted after the paper is refilled. If device runs out of paper during print/copy, counter differences may occur. There is a 2 second timeout after print. There is a 2 second timeout after copy.	No	No	No	No	No	No	No	No
Canon	iR-ADV C255i		Yes	No	Yes	Yes	Yes	No	CANON-MFP-COL-A4-iRC355	No	No	No	Recommended driver: CANON-MFP-COL-A4-iRC355 Limitations: If device runs out of paper during print/copy, jobs are accounted after the paper is refilled. If device runs out of paper during print/copy, counter differences may occur. There is a 2 second timeout after print. There is a 2 second timeout after copy.	No	No	No	No	No	No	No	No
Canon	iR-ADV C5560i		Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iR52xx	No	No	No	Recommended driver: CANON-MFP-COL-A3-iR52xx Limitations: Counters for copy and print are shared. There is a 1 second timeout after print. There is a 1 second timeout after copy. Scan to USB is not accounted.	No	No	No	No	No	No	No	No
Canon	iR-ADV C5550i		Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iR52xx	No	No	No	Recommended driver: CANON-MFP-COL-A3-iR52xx Limitations: Counters for copy and print are shared. There is a 1 second timeout after print. There is a 1 second timeout after copy. Scan to USB is not accounted.	No	No	No	No	No	No	No	No
Canon	iR-ADV C5540i		Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iR52xx	No	No	No	Recommended driver: CANON-MFP-COL-A3-iR52xx Limitations: Counters for copy and print are shared. There is a 1 second timeout after print. There is a 1 second timeout after copy. Scan to USB is not accounted.	No	No	No	No	No	No	No	No
Canon	iR-ADV C5540		Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iR52xx	No	No	No	Recommended driver: CANON-MFP-COL-A3-iR52xx Limitations: Counters for copy and print are shared. There is a 1 second timeout after print. There is a 1 second timeout after copy. Scan to USB is not accounted.	No	No	No	No	No	No	No	No
Canon	iR-ADV C5535		Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iR52xx	No	No	No	Recommended driver: CANON-MFP-COL-A3-iR52xx Limitations: Counters for copy and print are shared. There is a 1 second timeout after print. There is a 1 second timeout after copy. Scan to USB is not accounted.	No	No	No	No	No	No	No	No
Canon	iR-ADV 8295		Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW-A3-iR8205	No	No	No	There is a 1 second timeout after print. There is a 1 second timeout after copy. Scan to USB is not accounted.	No	No	No	No	No	No	No	No
Canon	iR-ADV 8285		Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW-A3-iR8205	No	No	No	There is a 1 second timeout after print. There is a 1 second timeout after copy. Scan to USB is not accounted.	No	No	No	No	No	No	No	No
Canon	iR-ADV 8205		Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW-A3-iR8205	No	No	No	There is a 1 second timeout after print. There is a 1 second timeout after copy. Scan to USB is not accounted.	No	No	No	No	No	No	No	No
Fuji Xerox	DocuPrint CM315 z	DocuPrint	Yes	No	Yes	Yes	No	No	FUJI-XEROX-MFP-COL-A4-CM315	No	No	No	Scan counter starts from 1. Scan to USB is not accounted. (Only Scan transfered via network/mail is accounted). Duplex copy is accounted as simplex. Duplex print is detected from print job parser.	No	No	No	Yes	No	No	No	No	LD device from YSoft SafeQ 6 MU22.
Fuji Xerox	DocuPrint CP315 dw	DocuPrint	No	No	Yes	Yes	No	No	FUJI-XEROX-PRN-COL-DP-CP405D	No	No	No	uplex print is accounted according to parser from job information.	No	No	No	Yes	No	No	No	No	LD device from YSoft SafeQ 6 MU22.
Sharp	MX-M356NV		Yes	Yes	No	Yes	No	No	SHARP-MFP-BW-DUP-MXM264	No	Yes	Yes	Recommended driver: SHARP-MFP-BW-DUP-MXM264 Limitations: Each A3 is accounted as 2xA4. Duplex detection during copying is not 100% accurate Counter difference may occur when Interrput function is used during print/copy.	No	No	No	No	No	No	No	No
Sharp	MX-M316NV		Yes	Yes	No	Yes	No	No	SHARP-MFP-BW-DUP-MXM264	No	Yes	Yes	Recommended driver: SHARP-MFP-BW-DUP-MXM264 Limitations: Each A3 is accounted as 2xA4. Duplex detection during copying is not 100% accurate Counter difference may occur when Interrput function is used during print/copy.	No	No	No	No	No	No	No	No
Sharp	MX-M266NV		Yes	Yes	No	Yes	No	No	SHARP-MFP-BW-DUP-MXM264	No	Yes	Yes	Recommended driver: SHARP-MFP-BW-DUP-MXM264 Limitations: Each A3 is accounted as 2xA4. Duplex detection during copying is not 100% accurate Counter difference may occur when Interrput function is used during print/copy.	No	No	No	No	No	No	No	No
Fuji Xerox	B9136	Light Publisher	Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device B9136 Controller ROM: 1.0.3 SJFI: 3.10.0 SSMI: 1.27.0 Plugin: 1.3.0 Test was done without GX Print Server. When GX Print Server is connected, print job management by SafeQ is not available (secure print via SafeQ), but only accounting result are tracked by SafeQ. Username would be parsed from print driver so user name matching Dispatcher Paragon user name shall be set to printer driver when submitting a print job to GX Print Server. General For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	B9125	Light Publisher	Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device B9136 Controller ROM: 1.0.3 SJFI: 3.10.0 SSMI: 1.27.0 Plugin: 1.3.0 Test was done without GX Print Server. When GX Print Server is connected, print job management by SafeQ is not available (secure print via SafeQ), but only accounting result are tracked by SafeQ. Username would be parsed from print driver so user name matching Dispatcher Paragon user name shall be set to printer driver when submitting a print job to GX Print Server. General For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	B9110	Light Publisher	Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device B9136 Controller ROM: 1.0.3 SJFI: 3.10.0 SSMI: 1.27.0 Plugin: 1.3.0 Test was done without GX Print Server. When GX Print Server is connected, print job management by SafeQ is not available (secure print via SafeQ), but only accounting result are tracked by SafeQ. Username would be parsed from print driver so user name matching Dispatcher Paragon user name shall be set to printer driver when submitting a print job to GX Print Server. General For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	B9100	Light Publisher	Yes	Yes	No	Yes	No	No		No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Tested FW B9136: Controller ROM: 1.0.3 SJFI: 3.10.0 SSMI: 1.27.0 Plugin: 1.3.0 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is suported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported. Test was done without GX Print Server. When GX Print Server is connected, print job management by Dispatcher Paragon is not available (secure print via SafeQ), but only accounting result are tracked by SafeQ. Username would be parsed from print driver so user name matching Dispatcher Paragon user name shall be set to printer driver when submitting a print job to GX Print Server.
Epson	WF-C17590	Enterprise	Yes	Yes	Yes	Yes	No	No	EPSON-MFP-COL-A3-WF8590	No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	Epson Open Platform firware required for Embedded terminal.
Epson	WF-C20590	Enterprise	Yes	Yes	Yes	Yes	No	No	EPSON-MFP-COL-A3-WF8590	No	Yes	Yes		No	Yes	No	No	No	No	No	Yes	Epson Open Platform firware required for Embedded terminal.
Fuji Xerox(JAPAN)	DocuPrint CP500 d	DocuPrint	No	No	Yes	No	No	No	FUJI-XEROX-PRN-COL-CP555	No	No	No	Recommended driver: FUJI-XEROX-PRN-COL-CP555	No	No	No	No	No	No	No	No
Fuji Xerox	DocuPrint CP555 d	DocuPrint	No	No	Yes	Yes	No	No	FUJI-XEROX-PRN-COL-CP555	No	No	No	Recommended driver: FUJI-XEROX-PRN-COL-CP555	No	No	No	No	No	No	No	No
Fuji Xerox	DocuPrint CP505 d	DocuPrint	No	No	Yes	Yes	No	No	FUJI-XEROX-PRN-COL-CP555	No	No	No	Recommended driver: FUJI-XEROX-PRN-COL-CP555	No	No	No	No	No	No	No	No
HP	LaserJet MFP M633	LaserJet	Yes	No	No	Yes	No	No	HP-MFP-BW-A4-M630	No	No	No	Recommended driver: HP-MFP-BW-A4-M630 Limitations: Counters for copy and print are shared. All counters start with 1.	Yes	Yes	No	No	No	No	No	Yes	* YSoft SafeQ 5 MU39 and later recommended * YSoft SafeQ 6 MU19 and MU20 require EAP license. * FW bundle version 4.6.0.1 and later required for USB readers
HP	LaserJet MFP E62575	LaserJet	Yes	No	No	Yes	Yes	No	HP-MFP-BW-A4-M527	No	No	No	Recommended driver: HP-MFP-BW-A4-M527 Limitations: There is a 1 seconds timeout after print. Counters for copy and print are shared. Scan counter start with 1. If device runs out of paper during print/copy, jobs are accounted after the paper is refilled.	Yes	Yes	No	No	No	No	No	Yes	* YSoft SafeQ 5 MU39 and later recommended * YSoft SafeQ 6 MU19 and MU20 require EAP license. * FW bundle version 4.6.0.1 and later required for USB readers
HP	LaserJet MFP E62565	LaserJet	Yes	No	No	Yes	Yes	No	HP-MFP-BW-A4-M527	No	No	No	Recommended driver: HP-MFP-BW-A4-M527 Limitations: There is a 1 seconds timeout after print. Counters for copy and print are shared. Scan counter start with 1. If device runs out of paper during print/copy, jobs are accounted after the paper is refilled.	Yes	Yes	No	No	No	No	No	Yes	* YSoft SafeQ 5 MU39 and later recommended * YSoft SafeQ 6 MU19 and MU20 require EAP license. * FW bundle version 4.6.0.1 and later required for USB readers
Kyocera Mita	TASKalfa 3011i		Yes	Yes	No	Yes	Yes	No	KM-MFP-BW-A3-TA3501I	No	No	No	Recommended driver: KM-MFP-BW-A3-TA3501I Limitations: Each A3 page is accounted as 2xA4 pages. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 3511i		Yes	Yes	No	Yes	Yes	No	KM-MFP-BW-A3-TA3501I	No	No	No	Recommended driver: KM-MFP-BW-A3-TA3501I Limitations: Each A3 page is accounted as 2xA4 pages. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Konica Minolta	bizhub 4752		Yes	No	No	Yes	Yes	No	MINOLTA-MFP-BW-A4-DUP-BIZHUB-4752	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A4-DUP-BIZHUB-4752 Limitations: There is 3 second timeout after copy and print.	Yes	Yes	No	No	No	No	Yes	Yes
Konica Minolta	4052	bizhub	Yes	No	No	Yes	Yes	No	MINOLTA-MFP-BW-A4-DUP-BIZHUB-4752	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A4-DUP-BIZHUB-4752 Limitations: There is 3 second timeout after copy and print.	Yes	Yes	No	Yes	No	No	Yes	Yes	SafeQ4 tested with the device FW version G00-12 LD device from YSoft SafeQ 6 Build 47
Konica Minolta	bizhub 3622		Yes	No	No	Yes	No	No	MINOLTA-MFP-BW-A4-DUP-BIZHUB-4750	No	No	No	MINOLTA-MFP-BW-A4-DUP-BIZHUB-4750 Limitations: There is 1 second timeout after copy and print. bizhub 4050: Required firmware for blocking: A6F730G0236-999 or newer. Revision of motherboard from serial number A6VF021006606 (valid only for Europe). bizhub 4750: Required firmware for blocking: A6F730G0236-999 or newer. Revision of motherboard from serial number A6VF021001836 (valid only for Europe).	No	No	No	No	No	No	No	No
Konica Minolta	bizhub 4422		Yes	No	No	Yes	No	No	MINOLTA-MFP-BW-A4-DUP-BIZHUB-4750	No	No	No	MINOLTA-MFP-BW-A4-DUP-BIZHUB-4750 Limitations: There is 1 second timeout after copy and print. bizhub 4050: Required firmware for blocking: A6F730G0236-999 or newer. Revision of motherboard from serial number A6VF021006606 (valid only for Europe). bizhub 4750: Required firmware for blocking: A6F730G0236-999 or newer. Revision of motherboard from serial number A6VF021001836 (valid only for Europe).	No	No	No	No	No	No	No	No
Konica Minolta	bizhub 3602P		No	No	No	Yes	No	No	MINOLTA-PRN-BW-A4-BIZHUB-3300P	No	No	No	Recommended driver: MINOLTA-PRN-BW-A4-BIZHUB-3300P Limitations: Duplex print is accounted according to parser from job information. There is a 4 seconds timeout after print.	No	No	No	Yes	No	No	No	No	LD device from YSoft SafeQ 6 MU28
Konica Minolta	bizhub 4402P		No	No	No	Yes	No	No	MINOLTA-PRN-BW-A4-BIZHUB-3300P	No	No	No	Recommended driver: MINOLTA-PRN-BW-A4-BIZHUB-3300P Limitations: Duplex print is accounted according to parser from job information. There is a 4 seconds timeout after print.	No	No	No	Yes	No	No	No	No	LD device from YSoft SafeQ 6 MU28
Konica Minolta	bizhub 4702P		No	No	No	Yes	No	No	MINOLTA-PRN-BW-A4-BIZHUB-3300P	No	No	No	Recommended driver: MINOLTA-PRN-BW-A4-BIZHUB-3300P Limitations: Duplex print is accounted according to parser from job information. There is a 4 seconds timeout after print.	No	No	No	Yes	No	No	No	No	LD device from YSoft SafeQ 6 MU28
HP	HP LaserJet E60075		No	No	No	Yes	No	No	HP-BW-PRT	No	No	No	Recommended driver: HP-BW-PRT Limitations: Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
HP	LaserJet E60065		No	No	No	Yes	No	No	HP-BW-PRT	No	No	No	Recommended driver: HP-BW-PRT Limitations: Duplex print is accounted according to parser from job information.	No	Yes	No	No	No	No	No	No
HP	HP LaserJet E60055		No	No	No	Yes	No	No	HP-BW-PRT	No	No	No	Recommended driver: HP-BW-PRT Limitations: Duplex print is accounted according to parser from job information. IPP Accounting Limitation: Blank pages are also accounted (when duplex job)	No	No	No	No	No	No	No	No
HP	HP LaserJet M607		No	No	No	Yes	No	No	HP-BW-PRT	No	No	No	Recommended driver: HP-BW-PRT Limitations: Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
HP	LaserJet M608		No	No	No	Yes	No	No	HP-BW-PRT	No	No	No	Recommended driver: HP-BW-PRT Limitations: Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
HP	HP LaserJet M609		No	No	No	Yes	No	No	HP-BW-PRT	No	No	No	Recommended driver: HP-BW-PRT Limitations: Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
HP	LaserJet MFP E62555	LaserJet	Yes	No	No	Yes	Yes	No	HP-MFP-BW-A4-M527	No	No	No	Recommended driver: HP-MFP-BW-A4-M527 Limitations: There is a 1 seconds timeout after print. Counters for copy and print are shared. Scan counter start with 1. If device runs out of paper during print/copy, jobs are accounted after the paper is refilled.	Yes	Yes	No	No	No	No	No	Yes	* YSoft SafeQ 5 MU39 and later recommended * YSoft SafeQ 6 MU19 and MU20 require EAP license. * FW bundle version 4.6.0.1 and later required for USB readers IPP Accounting available with limitation LIMIT-177
Konica Minolta	bizhub 195	bizhub	Yes	Yes	No	No	No	No	MINOLTA-MFP-BW-A3-DUP-195	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-DUP-195 Limitations: There is a 3 seconds timeout after copy. Counters for copy and print are shared. Only for bizhub 195 with G09-20/G01-03 firmware!	No	No	No	No	No	No	No	No	support for Embedded terminal.
Fuji Xerox	ApeosPort-VI C3370	ApeosPort-VI	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	No	Yes	Information about the tested device ApeosPort-VI C2271(APAC model): Controller ROM: 1.1.11 SJFI: 3.10.0 SSMI: 1.26.1 Plugin: 1.1.5 General USB Card reader can be used in combination with XCP plugin terminal. EPA Card reader can be used in combination with native terminal with Authentication Agent. EPA interface has not been supported from ApeosPort-VI(2016) for 3rd party partners by Fuji Xerox. The device has EPA connector on the back panel, however the EPA interface operation is not guarantee by Fuji Xerox. So correct functioning of the EPA card reader is not guaranteed. Copying For XCP terminal to restrict Full Color copy by SafeQ user Access Right, the setting bellow shall be applied to the device. Log in to the device as Administrator -> tools -> Authentication/Security Settings -> Authentication -> Access Control -> Feature access -> Color Copying (change it to Locked) -> Save -> Navigate out of all settings and reboot the device. Scanning SafeQ5 Workflow scan does not support XDW format. SafeQ6 Workflow scan does not support XPS and XDW format. Common Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black). Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
HP	PageWide Managed Color E77660	E776xx series	Yes	Yes	Yes	Yes	No	No	HP-MFP-COL-A3-M880	No	No	No	Recommended driver: HP-MFP-COL-A3-M880 Limitation: Counters for copy and print are shared. All counters start with 1. Blocking interface limitations: Only copy function can be blocked via FIH port.	Yes	Yes	No	No	No	No	Yes	Yes	FW bundle version 4.6.0.1 and later required for USB readers YSoft SafeQ 5 MU39 and later recommended
HP	PageWide Managed Color E77650	E776xx series	Yes	Yes	Yes	Yes	No	No	HP-MFP-COL-A3-M880	No	No	No	Recommended driver: HP-MFP-COL-A3-M880 Limitation: Counters for copy and print are shared. All counters start with 1. Blocking interface limitations: Only copy function can be blocked via FIH port.	Yes	Yes	No	No	No	No	Yes	Yes	FW bundle version 4.6.0.1 and later required for USB readers YSoft SafeQ 5 MU39 and later recommended
Brother	MFC-L5700DN		Yes	No	No	Yes	No	No	BROTHER-PRN-BW-A4-5700DN	No	No	Yes	Recommended driver: BROTHER-PRN-BW-A4-5700DN Limitations: Status detection during scan is not supported	No	Yes	No	No	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP. Requires EAP license
Brother	HL-L6250DN		No	No	No	Yes	No	No	BROTHER-PRN-BW-A4-HL6250DN	No	Yes	Yes		No	No	No	No	No	No	No	No
Kyocera Mita	4002i	TASKalfa	Yes	Yes	No	Yes	No	No	KM-MFP-COL-A3-TA3051C	No	No	No	Recommended driver: KM-MFP-BW-A3-TA3501I Limitations: Each A3 page is accounted as 2xA4 pages. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Kyocera Mita	5002i	TASKalfa	Yes	Yes	No	Yes	No	No	KM-MFP-COL-A3-TA3051C	No	No	No	Recommended driver: KM-MFP-BW-A3-TA3501I Limitations: Each A3 page is accounted as 2xA4 pages. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Kyocera Mita	6002i	TASKalfa	Yes	Yes	No	Yes	No	No	KM-MFP-BW-A3-TA3501I	No	No	No	Recommended driver: KM-MFP-BW-A3-TA3501I Limitations: Each A3 page is accounted as 2xA4 pages. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Lexmark	CX725		Yes	No	Yes	Yes	No	No	LEXMARK-MFP-COL-A3-X9xxde	No	No	No	Recommended driver: LEXMARK-MFP-COL-A3-X9xxde Limitations: Duplex print is detected from print job. Duplex copy is accounted as simplex copy. A3 print/copy is accounted as A4 print/copy. Device does not send accounting information during sleep mode. Status detection is supported for following device language settings: English	Yes	Yes	No	No	No	No	Yes	Yes
Aurora	AD168		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-BIZHUB-210	No	No	No	Recommended driver: MINOLTA-MFP-BW-BIZHUB-210 Limitations: There are 7 seconds timeouts after copy and print. Counters for copy and print are shared. Additional busy state recognition from number of active jobs. A device must be set to mode 2.	No	No	No	No	No	No	No	No	Only Konica Minolta controllers are supported. Online accounting does not work with external EFI controllers.
Aurora	AD218		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-BIZHUB-210	No	No	No	Recommended driver: MINOLTA-MFP-BW-BIZHUB-210 Limitations: There are 7 seconds timeouts after copy and print. Counters for copy and print are shared. Additional busy state recognition from number of active jobs. A device must be set to mode 2.	No	No	No	No	No	No	No	No	Only Konica Minolta controllers are supported. Online accounting does not work with external EFI controllers.
Aurora	AD258		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-BIZHUB	No	No	No	Recommended driver: MINOLTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs.	No	No	No	No	No	No	No	No	Only Konica Minolta controllers are supported. Online accounting does not work with external EFI controllers.
Aurora	AD358		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-BIZHUB	No	No	No	Recommended driver: MINOLTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs.	No	No	No	No	No	No	No	No	Only Konica Minolta controllers are supported. Online accounting does not work with external EFI controllers.
Aurora	AD428		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-BIZHUB	No	No	No	Recommended driver: MINOLTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs.	No	No	No	No	No	No	No	No
Aurora	AD508		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-BIZHUB	No	No	No	Recommended driver: MINOLTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs.	No	No	No	No	No	No	No	No
Aurora	AD288		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-BIZHUB	No	No	No	Recommended driver: MINOLTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs.	No	No	No	No	No	No	No	No	Embedded terminal not supported.
Aurora	AD368		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-BIZHUB	No	No	No	Recommended driver: MINOLTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs.	No	No	No	No	No	No	No	No	Embedded terminal not supported.
Aurora	AD426		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-BIZHUB	No	No	No	Recommended driver: MINOLTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs.	Yes	Yes	No	No	No	No	Yes	No	Native: HDD: 250GB (HDD HD-516), Memory: 1,5GB for Account Maps accounting Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 1,5GB (extended memory UK-201) Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 1,5GB (extended memory UK-201), LK-101 iOption License Kit Recommended latest FW for embedded terminal.
Aurora	AD506		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-BIZHUB	No	No	No	Recommended driver: MINOLTA-MFP-BW-BIZHUB Limitations: There are 4.5 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs.	No	No	No	No	No	No	Yes	No	Native: HDD: 250GB (HDD HD-516), Memory: 1,5GB for Account Maps accounting Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 1,5GB (extended memory UK-201) Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 1,5GB (extended memory UK-201), LK-101 iOption License Kit Recommended latest FW for embedded terminal.
Aurora	AD166		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-211	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-211 Limitations: There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy. Counters for copy and print are shared.	No	No	No	No	No	No	No	No	Embedded terminal not supported.
Aurora	AD216		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-211	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-211 Limitations: There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy. Counters for copy and print are shared.	No	No	No	No	No	No	No	No	Embedded terminal not supported.
Aurora	AD219		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-DUP-BIZHUB-215	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-DUP-BIZHUB-215 Limitations: There are 3 seconds timeout after copy. Counters for copy and print are shared.	No	No	No	No	No	No	No	No	Embedded terminal not supported.
Aurora	AD289		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	No	No	Recommended driver: MINOLTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2 Limitations: There are 3 seconds timeouts after copy and print. Additional busy state recognition from number of active jobs. This driver is suitable for Mode2 accounting. Offline copy accounting enabled. A3 scan is accounted as 2xA4. Each scan is accounted also as a copy with 0 pages. Separate counters for print and copy. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: HDD: 250GB (HDD HD-516), Memory: 2GB Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 3GB (extended memory UK-203), LK-101 iOption License Kit Recommended latest FW for embedded terminal.
Aurora	AD369		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	No	No	Recommended driver: MINOLTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2 Limitations: There are 3 seconds timeouts after copy and print. Additional busy state recognition from number of active jobs. This driver is suitable for Mode2 accounting. Offline copy accounting enabled. A3 scan is accounted as 2xA4. Each scan is accounted also as a copy with 0 pages. Separate counters for print and copy. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	No	No	Yes	Yes	Native: HDD: 250GB (HDD HD-516), Memory: 2GB Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 3GB (extended memory UK-203), LK-101 iOption License Kit Recommended latest FW for embedded terminal.
Aurora	AD429		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	No	No	Recommended driver: MINOLTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2 Limitations: There are 3 seconds timeouts after copy and print. Additional busy state recognition from number of active jobs. This driver is suitable for Mode2 accounting. Offline copy accounting enabled. A3 scan is accounted as 2xA4. Each scan is accounted also as a copy with 0 pages. Separate counters for print and copy. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: HDD: 250GB (HDD HD-516), Memory: 2GB Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 3GB (extended memory UK-203), LK-101 iOption License Kit Recommended latest FW for embedded terminal.
Aurora	ADC258		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-BIZC250	No	No	No	Recommended driver: MINOLTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2.	No	No	No	No	No	No	No	No
Aurora	ADC256		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-BIZC250	No	No	No	Recommended driver: MINOLTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2.	Yes	Yes	No	No	No	No	Yes	No	Native: HDD: 250GB (HDD HD-516), Memory: 1,5GB for Account Maps accounting Native with MyPanel: HDD: 250GB (HDD HD-516) Memory:1,5GB extended memory UK-201 Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory:1,5GB extended memory UK-201, LK-101 iOption License Kit Recommended latest FW for embedded terminal.
Aurora	ADC358		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-BIZC250	No	No	No	Recommended driver: MINOLTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2.	Yes	Yes	No	No	No	No	Yes	No	Native: HDD: 250GB (HDD HD-516), Memory: 1,5GB for Account Maps accounting Native with MyPanel: HDD: 250GB (HDD HD-516) Memory:1,5GB extended memory UK-201 Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory:1,5GB extended memory UK-201, LK-101 iOption License Kit Recommended latest FW for embedded terminal.
Aurora	ADC218		Yes	Yes	Yes	Yes	No	No	MINOLTA-BIZC250	No	No	No	Recommended driver: MINOLTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2.	No	No	No	No	No	No	No	No
Aurora	ADC288		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-BIZC250	No	No	No	Recommended driver: MINOLTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: HDD: 250GB, Memory: 2GB Native with MyPanel: DD: 250GB Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB Memory: 3GB (extended memory UK-203) LK-101v2 iOption License Kit Recommended latest FW for embedded terminal.
Aurora	ADC368		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-BIZC250	No	No	No	Recommended driver: MINOLTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: HDD: 250GB, Memory: 2GB Native with MyPanel: DD: 250GB Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB Memory: 3GB (extended memory UK-203) LK-101v2 iOption License Kit Recommended latest FW for embedded terminal.
Aurora	ADC285		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: HDD: 250GB and Memory: 2GB built in by default Native with MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) Browser with/without MyPanel: HDD: 250GB, Memory: 4GB (extended memory UK-204), LK-101v3 iOption License Kit Recommended latest firmware (above G20-58). USB print without re-authentication when using IC card authentication is supported only with OpenAPI 4.0 Card registration and billing code selection in the same authentication causes the terminal to stay in main authentication screen.
Aurora	ADC286		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101) OpenApi version 3.7.2 supported so far. When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-63
Aurora	ADC366		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101) OpenApi version 3.7.2 supported so far. When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-63
Aurora	ADC223		Yes	Yes	Yes	Yes	No	No	MINOLTA-MFP-COL-A3-C221-M1 / MINOLTA-MFP-COL-A3-C221-M2	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-C221-M1 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. This driver is for "total counter mode 1" MFD setting. MINOLTA-MFP-COL-A3-C221-M2 here is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) This driver is for "total counter mode 2" MFD setting.	No	No	No	No	No	No	No	No	Embedded terminal not supported.
Aurora	ADC283		Yes	Yes	Yes	Yes	No	No	MINOLTA-MFP-COL-A3-C221-M1 / MINOLTA-MFP-COL-A3-C221-M2	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-C221-M1 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. This driver is for "total counter mode 1" MFD setting. MINOLTA-MFP-COL-A3-C221-M2 here is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) This driver is for "total counter mode 2" MFD setting.	No	No	No	No	No	No	No	No	Embedded terminal not supported.
Aurora	ADC227		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW: A7970Y0-0100-G00-10(00) Supports SafeQ 6 Basic and Advanced Finishing Options. SafeQ 6 Universal Print Driver compatible.
Aurora	ADC287		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested FW: A7970Y0-0100-G00-10(00) Supports SafeQ 6 Basic and Advanced Finishing Options. SafeQ 6 Universal Print Driver compatible.
Aurora	ADC307		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
Aurora	ADC367		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	No	No	Yes	Yes	To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
Aurora	ADC456		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101) OpenApi version 3.7.2 supported so far. When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-63
Aurora	ADC556		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101) OpenApi version 3.7.2 supported so far. When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-63
Aurora	ADC455		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Controler ROM version for SafeQ5: A79J0Y0-0100-G00-10 Tested FW for SafeQ 4: G00-21
Aurora	ADC555		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Controler ROM version for SafeQ5: A79J0Y0-0100-G00-10 Tested FW for SafeQ 4: G00-21
Aurora	AD208		Yes	Yes	No	Yes	No	No	MINOLTA-MFP-BW-A3-DUP-BIZHUB-215	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-DUP-BIZHUB-215 Limitations: There are 3 seconds timeout after copy. Counters for copy and print are shared.	No	No	No	No	No	No	No	No	Embedded terminal not supported.
Aurora	AD228		Yes	Yes	No	Yes	No	No	MINOLTA-MFP-BW-A3-DUP-BIZHUB-215	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-DUP-BIZHUB-215 Limitations: There is 3 seconds timeout after copy. Counters for copy and print are shared.	No	No	No	No	No	No	No	No	Embedded terminal not supported.
Aurora	AD248		Yes	Yes	No	Yes	No	No	MINOLTA-MFP-BW-A3-DUP-BIZHUB-215	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-DUP-BIZHUB-215 Limitations: There is 3 seconds timeout after copy. Counters for copy and print are shared.	No	No	No	No	No	No	No	No	Embedded terminal not supported.
Aurora	AD268		Yes	Yes	No	Yes	No	No	MINOLTA-MFP-BW-A3-DUP-BIZHUB-215	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-DUP-BIZHUB-215 Limitations: There is 3 seconds timeout after copy. Counters for copy and print are shared.	No	No	No	No	No	No	No	No	Embedded terminal not supported.
Aurora	AD308		Yes	Yes	No	Yes	No	No	MINOLTA-MFP-BW-A3-DUP-BIZHUB-215	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-DUP-BIZHUB-215 Limitations: There are 3 seconds timeout after copy. Counters for copy and print are shared.	No	No	No	No	No	No	No	No	Embedded terminal not supported.
Aurora	AD289e		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101)
Aurora	AD369e		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101)
Aurora	AD289S		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Recommended latest firmware (above G00-24). To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
Aurora	AD369S		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Recommended latest firmware (above G00-24). To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
Aurora	AD456		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101)
Aurora	AD556		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101)
Aurora	AD656		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-83	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101) OpenApi version 3.7.2 supported so far.
Aurora	AD756		Yes	No	Yes	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-83	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101) OpenApi version 3.7.2 supported so far.
Aurora	AD775		Yes	Yes	No	Yes	No	No	MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	No	No	MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes
HP	Color LaserJet Managed MFP E77830		Yes	Yes	Yes	Yes	No	No	HP-MFP-COL-A3-M880	No	No	No	Recommended driver: HP-MFP-COL-A3-M880 Limitation: Counters for copy and print are shared. All counters start with 1. Blocking interface limitations: Only copy function can be blocked via FIH port.	Yes	Yes	No	No	No	No	Yes	Yes	* YSoft SafeQ 5 MU39 and later recommended * YSoft SafeQ 6 MU19 and MU20 require EAP license. * FW bundle version 4.6.0.1 and later required for USB readers
HP	Color LaserJet Managed MFP E77825		Yes	Yes	Yes	Yes	No	No	HP-MFP-COL-A3-M880	No	No	No	Recommended driver: HP-MFP-COL-A3-M880 Limitation: Counters for copy and print are shared. All counters start with 1. Blocking interface limitations: Only copy function can be blocked via FIH port.	Yes	Yes	No	No	No	No	Yes	Yes	* YSoft SafeQ 5 MU39 and later recommended * YSoft SafeQ 6 MU19 and MU20 require EAP license. * FW bundle version 4.6.0.1 and later required for USB readers
HP	Color LaserJet Managed MFP E77822		Yes	Yes	Yes	Yes	No	No	HP-MFP-COL-A3-M880	No	No	No	Recommended driver: HP-MFP-COL-A3-M880 Limitation: Counters for copy and print are shared. All counters start with 1. Blocking interface limitations: Only copy function can be blocked via FIH port.	Yes	Yes	No	No	No	No	Yes	Yes	* YSoft SafeQ 5 MU39 and later recommended * YSoft SafeQ 6 MU19 and MU20 require EAP license. * FW bundle version 4.6.0.1 and later required for USB readers
Epson	WF-M5690	WorkForce Pro	Yes	No	No	Yes	No	No	EPSON-MFP-BW-A4-WFM5690	No	Yes	Yes	Recommended driver: EPSON-MFP-BW-A4-WFM5690 Limitations: Counters for copy and print are shared.	No	Yes	No	No	No	No	No	Yes	Epson Open Platform firware required for Embedded terminal.
Epson	WF-5190	WorkForce Pro	No	No	Yes	Yes	No	No	EPSON-PRN-COL-A4-WF5190	No	Yes	Yes		Yes	No	No	No	No	No	No	No
Ricoh	MP C6004ex		Yes	Yes	Yes	Yes	Yes	No	RICOH-MFP-COL-A3-C3004	No	No	No	Recommended driver: RICOH-MFP-COL-A3-C3004 Limitations: separate counters for A3. Device accounts A3 pages as one or two A4 pages depending on device configuration. Driver can be set for offline copy accounting.	Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Ricoh	MP C5504ex		Yes	Yes	Yes	Yes	Yes	No	RICOH-MFP-COL-A3-C3004	No	No	No	Recommended driver: RICOH-MFP-COL-A3-C3004 Limitations: separate counters for A3. Device accounts A3 pages as one or two A4 pages depending on device configuration. Driver can be set for offline copy accounting.	Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Ricoh	MP C4504ex		Yes	Yes	Yes	Yes	Yes	No	RICOH-MFP-COL-A3-C3004	No	No	No	Recommended driver: RICOH-MFP-COL-A3-C3004 Limitations: separate counters for A3. Device accounts A3 pages as one or two A4 pages depending on device configuration. Driver can be set for offline copy accounting.	Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Ricoh	MP C3504ex		Yes	Yes	Yes	Yes	Yes	No	RICOH-MFP-COL-A3-C3004	No	No	No	Recommended driver: RICOH-MFP-COL-A3-C3004 Limitations: separate counters for A3. Device accounts A3 pages as one or two A4 pages depending on device configuration. Driver can be set for offline copy accounting.	Yes	Yes	No	No	No	No	Yes	Yes	SDK/J 12.x HDD required
Ricoh	MP C3004ex		Yes	Yes	Yes	Yes	Yes	No	RICOH-MFP-COL-A3-C3004	No	No	No	Recommended driver: RICOH-MFP-COL-A3-C3004 Limitations: separate counters for A3. Device accounts A3 pages as one or two A4 pages depending on device configuration. Driver can be set for offline copy accounting.	Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Ricoh	MP C2504ex		Yes	Yes	Yes	Yes	Yes	No	RICOH-MFP-COL-A3-C3004	No	No	No	separate counters for A3. Device accounts A3 pages as one or two A4 pages depending on device configuration. Driver can be set for offline copy accounting.	Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Ricoh	MP C2004ex		Yes	Yes	Yes	Yes	Yes	No	RICOH-MFP-COL-A3-C3004	No	No	No	separate counters for A3. Device accounts A3 pages as one or two A4 pages depending on device configuration. Driver can be set for offline copy accounting.	Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
HP	LaserJet MFP M631	LaserJet	Yes	No	No	Yes	No	No	HP-MFP-BW-A4-M630	No	No	No	Recommended driver: HP-MFP-BW-A4-M630 Limitations: Counters for copy and print are shared. All counters start with 1.	Yes	Yes	No	No	No	No	No	Yes	* YSoft SafeQ 5 MU39 and later recommended * YSoft SafeQ 6 MU19 and MU20 require EAP license. * FW bundle version 4.6.0.1 and later required for USB readers
Develop	1052	Ineo	Yes	No	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-BH1052	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A3-BH1052 Limitations: Duplex print is accounted according to parser from job information. There is a 3 second timeout after print. There is a 3 second timeout after copy. Additional busy state recognition from number of active jobs. This driver is suitable for Mode1 accounting.	No	No	No	No	Yes	Yes	No	Yes	Billing code selection and card self-registration is not supported and ends with an error.
Develop	1052e	Ineo	Yes	No	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-BH1052	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A3-BH1052 Limitations: Duplex print is accounted according to parser from job information. There is a 3 second timeout after print. There is a 3 second timeout after copy. Additional busy state recognition from number of active jobs. This driver is suitable for Mode1 accounting.	No	No	No	No	Yes	Yes	No	Yes	Billing code selection and card self-registration is not supported and ends with an error.
Develop	1250	Ineo	Yes	No	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-BH1052	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A3-BH1052 Limitations: Duplex print is accounted according to parser from job information. There is a 3 second timeout after print. There is a 3 second timeout after copy. Additional busy state recognition from number of active jobs. This driver is suitable for Mode1 accounting.	No	No	No	No	Yes	Yes	No	Yes	Billing code selection and card self-registration is not supported and ends with an error.
Develop	1250e	Ineo	Yes	No	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-BH1052	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A3-BH1052 Limitations: Duplex print is accounted according to parser from job information. There is a 3 second timeout after print. There is a 3 second timeout after copy. Additional busy state recognition from number of active jobs. This driver is suitable for Mode1 accounting.	No	No	No	No	Yes	Yes	No	Yes	Billing code selection and card self-registration is not supported and ends with an error.
Konica Minolta	1250e	bizhub Press	Yes	No	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-BH1052	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-BH1052 Limitations: Duplex print is accounted according to parser from job information. There is a 3 second timeout after print. There is a 3 second timeout after copy. Additional busy state recognition from number of active jobs. This driver is suitable for Mode1 accounting.	No	No	No	No	Yes	Yes	No	Yes	Billing code selection and card self-registration is not supported and ends with an error.
Konica Minolta	1052e	bizhub Press	Yes	No	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-BH1052	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-BH1052 Limitations: Duplex print is accounted according to parser from job information. There is a 3 second timeout after print. There is a 3 second timeout after copy. Additional busy state recognition from number of active jobs. This driver is suitable for Mode1 accounting.	No	No	No	No	Yes	Yes	No	Yes	Billing code selection and card self-registration is not supported and ends with an error.
Xerox	VersaLink B7025	VersaLink	Yes	Yes	No	Yes	Yes	No	XEROX-MFP-BW-A3-WC58XX-V3, XEROX-MFP-BW-A3-RAISED	No	Yes	Yes	Recommended driver: XEROX-MFP-BW-A3-WC58XX-V3 Limitations: For WC52xx: Please use this driver if using FW version equal or newer than 1.207.129 There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy. XEROX-MFP-BW-A3-RAISED Limitations: All counters start with 1 For WC52xx: Please use this driver if using FW version equal or newer than 1.207.129 There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended
Develop	ineo+ 2070		Yes	Yes	Yes	Yes	No	No		No	Yes	Yes		Yes	Yes	No	No	No	No	Yes	Yes	Recommended firmware: GM9-21 and newer System auto reset is disabled by default, please contact your distributor for service menu configuration. Authentication cache not yest tested for SafeQ 6 With internal controller IC-603. Firmware GM9-21 and later supports Billing codes and Card self assignment. RBE and Finishing options are not supported.
Kyocera Mita	TASKalfa 6052ci		Yes	Yes	Yes	Yes	Yes	No	KM-MFP-COL-A3-TA3051C	No	No	No	Recommeded driver: KM-MFP-COL-A3-TA3051CI Limitations: Each A3 page is accounted as two A4 pages. Monocolor copy counter starts from 1. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 5052ci		Yes	Yes	Yes	Yes	Yes	No	KM-MFP-COL-A3-TA3051C	No	No	No	Recommeded driver: KM-MFP-COL-A3-TA3051CI Limitations: Each A3 page is accounted as two A4 pages. Monocolor copy counter starts from 1. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 4052ci		Yes	Yes	Yes	Yes	Yes	No	KM-MFP-COL-A3-TA3051C	No	No	No	Recommeded driver: KM-MFP-COL-A3-TA3051CI Limitations: Each A3 page is accounted as two A4 pages. Monocolor copy counter starts from 1. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 3552ci		Yes	Yes	Yes	Yes	Yes	No	KM-MFP-COL-A3-TA3051C	No	No	No	Recommeded driver: KM-MFP-COL-A3-TA3051CI Limitations: Each A3 page is accounted as two A4 pages. Monocolor copy counter starts from 1. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 3252ci		Yes	Yes	Yes	Yes	Yes	No	KM-MFP-COL-A3-TA3051C	No	No	No	Recommeded driver: KM-MFP-COL-A3-TA3051CI Limitations: Each A3 page is accounted as two A4 pages. Monocolor copy counter starts from 1. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Kyocera Mita	TASKalfa 2552ci		Yes	Yes	Yes	Yes	Yes	No	KM-MFP-COL-A3-TA3051C	No	No	No	Recommeded driver: KM-MFP-COL-A3-TA3051CI Limitations: Each A3 page is accounted as two A4 pages. Monocolor copy counter starts from 1. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Ricoh	MP C407		Yes	No	Yes	Yes	Yes	No	RICOH-MFP-COL-A4-MPC306	No	No	No	Recommended driver: RICOH-MFP-COL-A4-MPC306 Limitations: All counters start with 1	Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional. Advanced Finishing Options not tested.
HP	LaserJet MFP M632	LaserJet	Yes	No	No	Yes	No	No	HP-MFP-BW-A4-M630	No	No	No	Recommended driver: HP-MFP-BW-A4-M630 Limitations: Counters for copy and print are shared. All counters start with 1.	Yes	Yes	No	No	No	No	No	Yes	* YSoft SafeQ 5 MU39 and later recommended * YSoft SafeQ 6 MU19 and MU20 require EAP license. * FW bundle version 4.6.0.1 and later required for USB readers
Triumph Adler	6006ci		Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver: TRIUMPH-MFP-COL-A3-3005CI Limitations: Each A3 page is accounted as two A4 pages. Monocolor copy counter starts from 1. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	5006ci		Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver: TRIUMPH-MFP-COL-A3-3005CI Limitations: Each A3 page is accounted as two A4 pages. Monocolor copy counter starts from 1. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	4006ci		Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver: TRIUMPH-MFP-COL-A3-3005CI Limitations: Each A3 page is accounted as two A4 pages. Monocolor copy counter starts from 1. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	3206ci		Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver: TRIUMPH-MFP-COL-A3-3005CI Limitations: Each A3 page is accounted as two A4 pages. Monocolor copy counter starts from 1. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	2506ci		Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver: TRIUMPH-MFP-COL-A3-3005CI Limitations: Each A3 page is accounted as two A4 pages. Monocolor copy counter starts from 1. Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Develop	ineo+ 220		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-BIZC250	No	Yes	Yes	Recommended driver: MINOLTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: HDD: 250GB, Memory: 2GB Native with MyPanel: DD: 250GB Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB Memory: 3GB (extended memory UK-203) LK-101v2 iOption License Kit Recommended latest FW for embedded terminal.
Develop	ineo+ 220		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-BIZC250	No	Yes	Yes	Recommended driver: MINOLTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: HDD: 250GB, Memory: 2GB Native with MyPanel: DD: 250GB Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB Memory: 3GB (extended memory UK-203) LK-101v2 iOption License Kit Recommended latest FW for embedded terminal.
Develop	ineo+ 280		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-BIZC250	No	Yes	Yes	Recommended driver: MINOLTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: HDD: 250GB, Memory: 2GB Native with MyPanel: DD: 250GB Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB Memory: 3GB (extended memory UK-203) LK-101v2 iOption License Kit Recommended latest FW for embedded terminal.
Develop	ineo+ 360		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-BIZC250	No	Yes	Yes	Recommended driver: MINOLTA-BIZC250 Limitations: There are 3 seconds timeouts after copy and print. Duplex for printing is detected from job. Duplex copy is using duplex counter. Additional busy state recognition from number of active jobs. A device must be set to mode 2.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: HDD: 250GB, Memory: 2GB Native with MyPanel: DD: 250GB Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB Memory: 3GB (extended memory UK-203) LK-101v2 iOption License Kit Recommended latest FW for embedded terminal.
Develop	ineo+ 652		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: HDD: 250GB (HDD HD-516), Memory: 2GB Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 3GB (extended memory UK-203), LK-101 iOption License Kit Recommended latest FW for embedded terminal. Scan Color auto detection not supported with Browser Embedded terminal.
Develop	ineo+ 552		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: HDD: 250GB (HDD HD-516), Memory: 2GB Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 3GB (extended memory UK-203), LK-101 iOption License Kit Recommended latest FW for embedded terminal. Scan Color auto detection not supported with Browser Embedded terminal.
Develop	ineo+ 452		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: HDD: 250GB (HDD HD-516), Memory: 2GB Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 3GB (extended memory UK-203), LK-101 iOption License Kit Recommended latest FW for embedded terminal. Scan Color auto detection not supported with Browser Embedded terminal.
Develop	ineo+ 1070		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to mode 2.	Yes	No	No	No	No	No	Yes	Yes	Native: Configuration with Fiery Image Controller is not supported. Self card assignment is not supported. Accounting of scanning is supported from SafeQ 5 Maintenance Update 30. User cannot log in when he has more than one billing code. Payment System: User is able to scan without credit / Device do not block user with no credit while scanning. Browser: t supported. Tested Controler ROM version: G00-20
Develop	ineo+ 658		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Controler ROM version for SafeQ5: A79J0Y0-0100-G00-10
Develop	ineo+ 558		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Controler ROM version for SafeQ5: A79J0Y0-0100-G00-10
Develop	ineo+ 458		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Controler ROM version for SafeQ5: A79J0Y0-0100-G00-10
Develop	ineo+ 3851FS		Yes	No	Yes	Yes	Yes	No	MINOLTA-MFP-COL-BIZHUB-C3850	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-BIZHUB-C3850	Yes	Yes	No	No	No	No	Yes	Yes	To use Scan Workflow of SafeQ6 on Native OpenAPI Terminal, use the FW: A92E0Y0-F000-G00-K8 or later. The model has an issue with Authentication cache behavior for authentication from the panel. Being investigated by Konica Minolta
Konica Minolta	bizhub C3581FS	bizhub	Yes	No	Yes	Yes	Yes	No	MINOLTA-MFP-COL-BIZHUB-C3850	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-BIZHUB-C3850	Yes	Yes	No	No	No	No	Yes	Yes	To use Scan Workflow of SafeQ6 on Native OpenAPI Terminal, use the FW: A92E0Y0-F000-G00-K8 or later.
Develop	ineo+ 3851		Yes	No	Yes	Yes	Yes	No	MINOLTA-MFP-COL-BIZHUB-C3850	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-BIZHUB-C3850	Yes	Yes	No	No	No	No	Yes	Yes	To use Scan Workflow of SafeQ6 on Native OpenAPI Terminal, use the FW: A92E0Y0-F000-G00-K8 or later. The model has an issue with Authentication cache behavior for authentication from the panel. Being investigated by Konica Minolta
Develop	ineo+ 3351		Yes	No	Yes	Yes	Yes	No	MINOLTA-MFP-COL-BIZHUB-C3850	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-BIZHUB-C3850	Yes	Yes	No	No	No	No	Yes	Yes	To use Scan Workflow of SafeQ6 on Native OpenAPI Terminal, use the FW: A92E0Y0-F000-G00-K8 or later. The model has an issue with Authentication cache behavior for authentication from the panel. Being investigated by Konica Minolta
Develop	ineo 367		Yes	No	No	No	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Recommended latest firmware (above G00-24). To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
Develop	ineo 287		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Recommended latest firmware (above G00-24). To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
Develop	ineo 227		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	No	No	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Recommended latest firmware (above G00-24). To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
Develop	ineo 4050		Yes	No	No	Yes	Yes	No	MINOLTA-MFP-BW-A4-DUP-BIZHUB-4750	No	Yes	Yes	MINOLTA-MFP-BW-A4-DUP-BIZHUB-4750 Limitations: There is 1 second timeout after copy and print. bizhub 4050: Required firmware for blocking: A6F730G0236-999 or newer. Revision of motherboard from serial number A6VF021006606 (valid only for Europe). bizhub 4750: Required firmware for blocking: A6F730G0236-999 or newer. Revision of motherboard from serial number A6VF021001836 (valid only for Europe).	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: Job details are not displayed with tested version of firmware. Recommended firmware: A6F730G0236-999 or newer. USB card reader: Required firmware: A6F730G0121-999 or newer. Device cancels Job by going to sleep mode. Browser: Recommended firmware A6F730G0804-W51 or later. Tested Controler ROM version: A6F730G0110-999
Develop	ineo 4750		Yes	No	No	Yes	Yes	No	MINOLTA-MFP-BW-A4-DUP-BIZHUB-4750	No	Yes	Yes	MINOLTA-MFP-BW-A4-DUP-BIZHUB-4750 Limitations: There is 1 second timeout after copy and print. ineo 4050: Required firmware for blocking: A6F730G0236-999 or newer. Revision of motherboard from serial number A6VF021006606 (valid only for Europe). ineo 4750: Required firmware for blocking: A6F730G0236-999 or newer. Revision of motherboard from serial number A6VF021001836 (valid only for Europe).	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: Job details are not displayed with tested version of firmware. Recommended firmware: A6F730G0236-999 or newer. USB card reader: Required firmware: A6F730G0121-999 or newer. Device cancels Job by going to sleep mode. Browser: Recommended firmware A6F730G0804-W51 or later. Tested Controler ROM version: A6F730G0110-999
Develop	ineo 4700P		No	No	No	Yes	No	No	MINOLTA-PRN-BW-A4-BIZHUB-3300P	No	Yes	Yes	Recommended driver: MINOLTA-PRN-BW-A4-BIZHUB-3300P Limitations: Duplex print is accounted according to parser from job information. There is a 4 seconds timeout after print.	No	No	No	No	No	No	No	No
Develop	ineo 3300P		No	No	No	Yes	No	No	MINOLTA-PRN-BW-A4-BIZHUB-3300P	No	Yes	Yes	Recommended driver: MINOLTA-PRN-BW-A4-BIZHUB-3300P Limitations: Duplex print is accounted according to parser from job information. There is a 4 seconds timeout after print.	No	No	No	No	No	No	No	No
Develop	ineo 3301P		No	No	No	Yes	No	No	MINOLTA-PRN-BW-A4-BIZHUB-3300P	No	Yes	Yes	MINOLTA-PRN-BW-A4-BIZHUB-3300P Limitations: Duplex print is accounted according to parser from job information. There is a 4 seconds timeout after print.	No	No	No	No	No	No	No	No
Develop	ineo 4000p		No	No	No	Yes	No	No	MINOLTA-PRN-BW-A4-BIZHUB-3300P	No	Yes	Yes	MINOLTA-PRN-BW-A4-BIZHUB-3300P Limitations: Duplex print is accounted according to parser from job information. There is a 4 seconds timeout after print.	No	No	No	No	No	No	No	No
Develop	ineo 1100		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-BH1100	No	Yes	Yes	MINOLTA-MFP-BW-A3-BH1100 Limitations: Additional busy state recognition from number of active jobs. This driver is suitable for Mode 1 accounting only. Device is not ready in sleep mode. Direct print is not possible when device is blocked by blocking cable.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: Self card assignment is not supported. Accounting of scanning is supported from SafeQ 5 Maintenance Update 30. User cannot log in when he has more than one billing code. Payment System: User is able to scan without credit / Device do not block user with no credit while scanning. Browser: t currently supported. Tested Controler ROM version: Controller P1: A7990Y0-00P1-G00-20 Controller P2: A799011-00P2-G00-10
Develop	ineo 958		Yes	Yes	No	Yes	No	No	MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Controler ROM version for SafeQ5: A7950Y0-0100-G00-17 (TE)
Develop	ineo 758		Yes	Yes	No	Yes	No	No	MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Tested Controler ROM version for SafeQ5: A7950Y0-0100-G00-17 (TE)
Develop	ineo 308		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE-V3	No	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2.	Yes	Yes	No	No	No	No	Yes	Yes
Develop	ineo 368		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE-V3	No	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2.	Yes	Yes	No	No	No	No	Yes	Yes
Develop	ineo 458		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE-V3	No	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2.	Yes	Yes	No	No	No	No	Yes	Yes
Develop	ineo 558		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE-V3	No	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2.	Yes	Yes	No	No	No	No	Yes	Yes
HP	LaserJet Pro MFP M477	LaserJet	Yes	No	Yes	Yes	No	No	HP-MFP-COL-A4-M475	No	No	No	Limitations: Counters for copy and print are shared. When the device runs out of paper during print/copy, jobs are accounted after the paper is refilled. There is a 5 seconds timeout after copy. Device cannot be blocked.	No	No	No	No	No	No	No	No
Ricoh	SP 4520DN		No	No	No	Yes	No	No	RICOH-PRN-BW-A4-4310	No	No	No		No	No	No	No	No	No	No	No
Ricoh	MP 5055		Yes	Yes	No	Yes	Yes	No	RICOH-MFP-BW-A3-2553	No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Ricoh	MP 4055		Yes	Yes	No	Yes	Yes	No	RICOH-MFP-BW-A3-2553	No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Ricoh	MP 3555		Yes	Yes	No	Yes	Yes	No	RICOH-MFP-BW-A3-2553	No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Ricoh	MP 2555		Yes	Yes	No	Yes	Yes	No	RICOH-MFP-BW-A3-2553	No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Xerox	DocuCentre SC2020	DocuCentre	Yes	Yes	Yes	Yes	No	No		No	Yes	Yes	Recommended driver: XEROX-MFP-COL-A3-SC2020 Limitations: Duplex print is detected from a job. Duplex copy is accounted as simplex copy. Each A3 page is accounted as A4 page.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-VI C7771	ApeosPort-VI	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VI C2271(APAC model): Controller ROM: 1.1.11 SJFI: 3.10.0 SSMI: 1.26.1 Plugin: 1.1.5 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VI C6671	ApeosPort-VI	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VI C2271(APAC model): Controller ROM: 1.1.11 SJFI: 3.10.0 SSMI: 1.26.1 Plugin: 1.1.5 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VI C5571	ApeosPort-VI	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VI C2271(APAC model): Controller ROM: 1.1.11 SJFI: 3.10.0 SSMI: 1.26.1 Plugin: 1.1.5 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VI C4471	ApeosPort-VI	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VI C2271(APAC model): Controller ROM: 1.1.11 SJFI: 3.10.0 SSMI: 1.26.1 Plugin: 1.1.5 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-VI C3371	ApeosPort-VI	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device ApeosPort-VI C2271(APAC model): Controller ROM: 1.1.11 SJFI: 3.10.0 SSMI: 1.26.1 Plugin: 1.1.5 General XCP Terminal requires FW1.1.101 or newer. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ MU75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation Installation requires following manual configuration (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System (XCP plugin terminal) Stop on Zero with the Payment System requires FW1.1.13 or newer. If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Konica Minolta	bizhub C266	bizhub	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-C221-M2	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-C221-M2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) This driver is for "total counter mode 2 MFD setting.	Yes	Yes	No	No	No	No	Yes	Yes	Tested Controler ROM version for SafeQ5: A90G0Y0-8100-G00-03 Authentication cache not yest tested for SafeQ 6.
Konica Minolta	bizhub C226	bizhub	Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-C221-M2	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-C221-M2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) This driver is for "total counter mode 2 MFD setting.	Yes	Yes	No	No	No	No	Yes	Yes	Tested Controler ROM version for SafeQ5: A90G0Y0-8100-G00-03 Authentication cache not yest tested for SafeQ 6.
Xerox	AltaLink B8090	AltaLink	Yes	Yes	No	Yes	Yes	No	XEROX-MFP-BW-A3-WC58XX-V3	No	Yes	Yes	Recommended driver: XEROX-MFP-BW-A3-WC58XX-V3 Limitations: There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU42+ recommended SafeQ 6 MU8+ recommended
Xerox	AltaLink B8075	AltaLink	Yes	Yes	No	Yes	Yes	No	XEROX-MFP-BW-A3-WC58XX-V3	No	Yes	Yes	Recommended driver: XEROX-MFP-BW-A3-WC58XX-V3 Limitations: There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU42+ recommended SafeQ 6 MU8+ recommended
Xerox	AltaLink B8065	AltaLink	Yes	Yes	No	Yes	Yes	No	XEROX-MFP-BW-A3-WC58XX-V3	No	Yes	Yes	Recommended driver: XEROX-MFP-BW-A3-WC58XX-V3 Limitations: There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU42+ recommended SafeQ 6 MU8+ recommended
Xerox	AltaLink B8055	AltaLink	Yes	Yes	No	Yes	Yes	No	XEROX-MFP-BW-A3-WC58XX-V3	No	Yes	Yes	Recommended driver: XEROX-MFP-BW-A3-WC58XX-V3 Limitations: There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU42+ recommended SafeQ 6 MU8+ recommended
Xerox	AltaLink B8045	AltaLink	Yes	Yes	No	Yes	Yes	No	XEROX-MFP-BW-A3-WC58XX-V3	No	Yes	Yes	Recommended driver: XEROX-MFP-BW-A3-WC58XX-V3 Limitations: There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU42+ recommended SafeQ 6 MU8+ recommended
Xerox	AltaLink C8070	AltaLink	Yes	Yes	Yes	Yes	No	No	XEROX-MFP-COL-A3-78XX-V3	No	Yes	Yes	Recommended driver: XEROX-MFP-COL-A3-78XX-V3 Limitations: There is a 3 seconds timeout after print. Duplex copies having odd number of pages can be accounted with one more page.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	SafeQ 5 MU42+ recommended SafeQ 6 MU8+ recommended
Xerox	AltaLink C8055	AltaLink	Yes	Yes	Yes	Yes	No	No	XEROX-MFP-COL-A3-78XX-V3	No	Yes	Yes	Recommended driver: XEROX-MFP-COL-A3-78XX-V3 Limitations: There is a 3 seconds timeout after print. Duplex copies having odd number of pages can be accounted with one more page.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	SafeQ 5 MU42+ recommended SafeQ 6 MU8+ recommended
Xerox	AltaLink C8045	AltaLink	Yes	Yes	Yes	Yes	No	No	XEROX-MFP-COL-A3-78XX-V3	No	Yes	Yes	Recommended driver: XEROX-MFP-COL-A3-78XX-V3 Limitations: There is a 3 seconds timeout after print. Duplex copies having odd number of pages can be accounted with one more page.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	SafeQ 5 MU42+ recommended SafeQ 6 MU8+ recommended
Xerox	AltaLink C8035	AltaLink	Yes	Yes	Yes	Yes	No	No	XEROX-MFP-COL-A3-78XX-V3	No	Yes	Yes	Recommended driver: XEROX-MFP-COL-A3-78XX-V3 Limitations: There is a 3 seconds timeout after print. Duplex copies having odd number of pages can be accounted with one more page.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	SafeQ 5 MU42+ recommended SafeQ 6 MU8+ recommended
Xerox	AltaLink C8030	AltaLink	Yes	Yes	Yes	Yes	No	No	XEROX-MFP-COL-A3-78XX-V3	No	Yes	Yes	Recommended driver: XEROX-MFP-COL-A3-78XX-V3 Limitations: There is a 3 seconds timeout after print. Duplex copies having odd number of pages can be accounted with one more page.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	SafeQ 5 MU42+ recommended SafeQ 6 MU8+ recommended
Xerox	VersaLink B7035	VersaLink	Yes	Yes	No	Yes	Yes	No	XEROX-MFP-BW-A3-WC58XX-V3, XEROX-MFP-BW-A3-RAISED	No	Yes	Yes	Recommended driver: XEROX-MFP-BW-A3-WC58XX-V3 Limitations: For WC52xx: Please use this driver if using FW version equal or newer than 1.207.129 There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy. XEROX-MFP-BW-A3-RAISED Limitations: All counters start with 1 For WC52xx: Please use this driver if using FW version equal or newer than 1.207.129 There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended
Xerox	VersaLink B7030	VersaLink	Yes	Yes	No	Yes	Yes	No	XEROX-MFP-BW-A3-WC58XX-V3, XEROX-MFP-BW-A3-RAISED	No	Yes	Yes	Recommended driver: XEROX-MFP-BW-A3-WC58XX-V3 Limitations: For WC52xx: Please use this driver if using FW version equal or newer than 1.207.129 There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy. XEROX-MFP-BW-A3-RAISED Limitations: All counters start with 1 For WC52xx: Please use this driver if using FW version equal or newer than 1.207.129 There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended
Xerox	VersaLink C7030	VersaLink	Yes	Yes	Yes	Yes	Yes	No	XEROX-MFP-COL-A3-78XX-V3	No	Yes	Yes	Recommended driver: XEROX-MFP-COL-A3-78XX-V3 Limitations: There is a 3 seconds timeout after print. Duplex copies having odd number of pages can be accounted with one more page.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended
Xerox	VersaLink C7025	VersaLink	Yes	Yes	Yes	Yes	Yes	No	XEROX-MFP-COL-A3-78XX-V3	No	Yes	Yes	Recommended driver: XEROX-MFP-COL-A3-78XX-V3 Limitations: There is a 3 seconds timeout after print. Duplex copies having odd number of pages can be accounted with one more page.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended IPP Accounting available with limitation LIMIT-177
Xerox	VersaLink C7020	VersaLink	Yes	Yes	Yes	Yes	Yes	No	XEROX-MFP-COL-A3-78XX-V3	No	Yes	Yes	Recommended driver: XEROX-MFP-COL-A3-78XX-V3 Limitations: There is a 3 seconds timeout after print. Duplex copies having odd number of pages can be accounted with one more page.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended
Xerox	VersaLink B610	VersaLink	No	No	No	Yes	No	No	XEROX-PRN-A4-BW-4620	No	Yes	Yes	Recommended driver: XEROX-PRN-A4-BW-4620 Limitations: There is a 1.5 seconds timeout after print.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended
Xerox	VersaLink B600	VersaLink	No	No	No	Yes	No	No	XEROX-PRN-A4-BW-4620	No	Yes	Yes	Recommended driver: XEROX-PRN-A4-BW-4620 Limitations: There is a 1.5 seconds timeout after print.	Yes	Yes	No	Yes	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended SafeQ Scan application not supported LD device from YSoft SafeQ 6 Build 47 IPP Accounting available with limitation LIMIT-177
Xerox	VersaLink C600	VersaLink	No	No	Yes	Yes	No	No	XEROX-PRN-COL-A4-6600DN	No	Yes	Yes	Recommended driver: XEROX-PRN-COL-A4-6600DN Limitations: Duplex print is accounted according to parser from job information.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended SafeQ Scan application not supported
Brother	DCP-L5650DN		Yes	No	No	Yes	No	No	BROTHER-MFP-BW-A4-7065DN	No	No	Yes	Recommended driver: BROTHER-MFP-BW-A4-7065DN Limitations: Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information.	No	Yes	No	No	No	No	No	No
Brother	MFC-L6700DW		Yes	No	No	Yes	No	No	BROTHER-MFP-BW-A4-7065DN	No	Yes	Yes	Recommended driver: BROTHER-MFP-BW-A4-7065DN Limitations: Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Xerox	Phaser 3330		No	No	No	Yes	No	No	XEROX-PRN-BW-A4-4620	No	Yes	Yes	Recommended driver: XEROX-PRN-BW-A4-4620 Limitations: There is a 1.5 seconds timeout after print.	No	No	No	Yes	No	No	No	No	LD device from YSoft SafeQ 6 MU17.
Xerox	WorkCentre 3335		Yes	No	No	Yes	No	No	XEROX-MFP-BW-A4-4150	No	Yes	Yes	Recommended driver: XEROX-MFP-BW-A4-4150 Limitations: There is 1 second timeout after print. Driver is using separated duplex counters.	No	Yes	No	Yes	No	No	Yes	Yes	External Mounting KIts: YSQM0-003-0000 for laying on table YSQM0-004-0000 for wall mounting SafeQ 4 or SafeQ 5 is required for YSoft USB Card Reader support. Network authentication (Convenience Authentication / Xerox Secure Access) supported by device. User will be able to authenticate on the device via USB card reader by card (recommended on this model small display) and via display by PIN code . Print all function will be available. Job Based Accounting not supported by device Only offline accouting. Only prints will be accounted with offline accounting / copies and scans will not be accounted. EIP not supported by device SafeQ applications cannot be accessed. Payment system is not supported. LD device from YSoft SafeQ MU24.
Ricoh	MP C2504		Yes	Yes	Yes	Yes	Yes	No	RICOH-MFP-COL-A3-C3004	No	No	No	separate counters for A3. Device accounts A3 pages as one or two A4 pages depending on device configuration. Driver can be set for offline copy accounting.	Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Ricoh	MP C2004		Yes	Yes	Yes	Yes	Yes	No	RICOH-MFP-COL-A3-C3004	No	No	No	separate counters for A3. Device accounts A3 pages as one or two A4 pages depending on device configuration. Driver can be set for offline copy accounting.	Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Xerox	WorkCentre 6515		Yes	No	Yes	Yes	No	No	XEROX-MFP-COL-A4-6655	No	Yes	Yes	Recommended driver: XEROX-MFP-COL-A4-6655 Limitations: There is a 2 seconds timeout after copy.	No	Yes	No	Yes	No	No	Yes	No	External Mounting KIts: YSQM0-003-0000 for laying on table YSQM0-004-0000 for wall mounting SafeQ 4 or SafeQ 5 is required for YSoft USB Card Reader support. Network authentication (Convenience Authentication / Xerox Secure Access) supported by device. User will be able to authenticate on the device via USB card reader by card (recommended on this model small display) and via display by PIN code . Print all function will be available. Job Based Accounting not supported by device Only offline accouting. Only prints will be accounted with offline accounting / copies and scans will not be accounted. EIP not supported by device SafeQ applications cannot be accessed. Payment system is not supported. LD device from YSoft SafeQ 6 MU17.
Xerox	WorkCentre 3345		Yes	No	No	Yes	No	No	XEROX-MFP-BW-A4-4150	No	Yes	Yes	Recommended driver: XEROX-MFP-BW-A4-4150 Limitations: There is 1 second timeout after print. Driver is using separated duplex counters. Counter difference may occur if the device is put to sleep mode during print/copy.	No	Yes	No	Yes	No	No	Yes	Yes	External Mounting KIts: YSQM0-003-0000 for laying on table YSQM0-004-0000 for wall mounting SafeQ 4 or SafeQ 5 is required for YSoft USB Card Reader support. Network authentication (Convenience Authentication / Xerox Secure Access) supported by device. User will be able to authenticate on the device via USB card reader by card (recommended on this model small display) and via display by PIN code . Print all function will be available. Job Based Accounting not supported by device Only offline accouting. Only prints will be accounted with offline accounting / copies and scans will not be accounted. EIP not supported by device. SafeQ applications cannot be accessed. Payment system is not supported. LD device from YSoft SafeQ 6 MU24.
Xerox	VersaLink B400	VersaLink	No	No	No	Yes	No	No	XEROX-PRN-A4-BW-4620	No	Yes	Yes	Recommended driver: XEROX-PRN-A4-BW-4620 Limitations: There is a 1.5 seconds timeout after print.	Yes	Yes	No	Yes	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended SafeQ Scan application not supported LD device from YSoft SafeQ 6 MU17.
Xerox	VersaLink B405	VersaLink	Yes	No	No	Yes	Yes	No	XEROX-MFP-BW-A4-3655	No	Yes	Yes	Recommended driver: XEROX-MFP-BW-A4-3655 Limitations: There is a 2 seconds timeout after copy. Scan to USB is not accounted.	Yes	Yes	No	Yes	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended LD device from YSoft SafeQ 6 MU17.
Xerox	VersaLink C400	VersaLink	No	No	Yes	Yes	No	No	XEROX-PRN-COL-A4-6600DN	No	Yes	Yes	Recommended driver: XEROX-PRN-COL-A4-6600DN Limitations: Duplex print is accounted according to parser from job information.	Yes	Yes	No	Yes	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended SafeQ Scan application not supported LD device from YSoft SafeQ 6 MU17.
Xerox	VersaLink C405	VersaLink	Yes	No	Yes	Yes	Yes	No	XEROX-MFP-COL-A4-6505	No	Yes	Yes	Recommended driver: XEROX-MFP-COL-A4-6505 Limitations: Duplex print is detected from a job. Duplex copy is accounted as simplex copy.	Yes	Yes	No	Yes	No	No	Yes	Yes	SafeQ 5 MU62 and later recommended SafeQ 6 MU26 and later recommended LD device from YSoft SafeQ 6 MU17.
Ricoh	MP C307		Yes	No	Yes	Yes	Yes	No	RICOH-MFP-COL-A4-MPC306	No	No	No	Recommended driver: RICOH-MFP-COL-A4-MPC306 Limitations: All counters start with 1	Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional. Advanced Finishing Options not tested.
Toshiba	e-STUDIO 2802AF	e-STUDIO	Yes	Yes	No	Yes	No	No	TOSHIBA-MFP-BW-A3-1CLICK-NODUP, TOSHIBA-MFP-BW-A3-2CLICK-NODUP	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copyis accounted as simplex. Driver can be set for offline copy accounting. There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. TOSHIBA-MFP-BW-A3-1CLICK-NODUP This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-2CLICK-NODUP This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	No	No	Request: SAFEQ-44367
Toshiba	e-STUDIO 2802AM	e-STUDIO	Yes	Yes	No	Yes	No	No	TOSHIBA-MFP-BW-A3-1CLICK-NODUP, TOSHIBA-MFP-BW-A3-2CLICK-NODUP	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copyis accounted as simplex. Driver can be set for offline copy accounting. There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. TOSHIBA-MFP-BW-A3-1CLICK-NODUP This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-2CLICK-NODUP This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	No	No	Request: SAFEQ-44367
Toshiba	e-STUDIO 2802A	e-STUDIO	Yes	Yes	No	Yes	No	No	TOSHIBA-MFP-BW-A3-1CLICK-NODUP, TOSHIBA-MFP-BW-A3-2CLICK-NODUP	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copyis accounted as simplex. Driver can be set for offline copy accounting. There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. TOSHIBA-MFP-BW-A3-1CLICK-NODUP This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-2CLICK-NODUP This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	No	No
Toshiba	e-STUDIO 8508A	Shastina	Yes	Yes	No	Yes	Yes	No	TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2, TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2 This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2 This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	No
Toshiba	e-STUDIO 7508A	Shastina	Yes	Yes	No	Yes	Yes	No	TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2, TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2 This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2 This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	Yes	No
Toshiba	e-STUDIO 6508A	Shastina	Yes	Yes	No	Yes	Yes	No	TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2, TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2 This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2 This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	No	SafeQ 5 (without Payment System)(not tested yet)
Toshiba	e-STUDIO 5508A	Shastina	Yes	Yes	No	Yes	Yes	No	TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2, TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-1CLICK-V2 This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-BW-A3-v3-GEN-TOTAL-2CLICKS-V2 This driver is for "Large paper=2clicks" counter MFD setting.	No	Yes	No	No	No	No	Yes	No	SafeQ 5 (without Payment System)(not tested yet)
Konica Minolta	C281	bizhub	Yes	Yes	Yes	Yes	No	No	MINOLTA-MFP-COL-A3-C221-M1 / MINOLTA-MFP-COL-A3-C221-M2	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-C221-M1 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. This driver is for "total counter mode 1" MFD setting. MINOLTA-MFP-COL-A3-C221-M2 here is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) This driver is for "total counter mode 2" MFD setting.	No	No	No	No	No	No	No	No	Embedded terminal not supported.
Konica Minolta	C221s	bizhub	Yes	Yes	Yes	Yes	No	No	MINOLTA-MFP-COL-A3-C221-M1 / MINOLTA-MFP-COL-A3-C221-M2	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-C221-M1 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. This driver is for "total counter mode 1" MFD setting. MINOLTA-MFP-COL-A3-C221-M2 here is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) This driver is for "total counter mode 2" MFD setting.	No	No	No	No	No	No	No	No	Embedded terminal not supported.
Konica Minolta	C221	bizhub	Yes	Yes	Yes	Yes	No	No	MINOLTA-MFP-COL-A3-C221-M1 / MINOLTA-MFP-COL-A3-C221-M2	No	No	No	Recommended driver: MINOLTA-MFP-COL-A3-C221-M1 There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. This driver is for "total counter mode 1" MFD setting. MINOLTA-MFP-COL-A3-C221-M2 here is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Each 2 colors print is accounted as a full-color print. Each 2 colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mode 2 behavior) This driver is for "total counter mode 2" MFD setting.	No	No	No	No	No	No	No	No	Embedded terminal not supported.
Konica Minolta	C3351	bizhub	Yes	No	Yes	Yes	Yes	No	MINOLTA-MFP-COL-BIZHUB-C3850	Yes	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-BIZHUB-C3850	Yes	Yes	No	No	No	No	Yes	Yes	To use Scan Workflow of SafeQ6 on Native OpenAPI Terminal, use the FW: A92E0Y0-F000-G00-K8 or later.
Konica Minolta	C3851	bizhub	Yes	No	Yes	Yes	Yes	No	MINOLTA-MFP-COL-BIZHUB-C3850	Yes	No	No	Recommended driver: MINOLTA-MFP-COL-BIZHUB-C3850	Yes	Yes	No	No	No	No	Yes	Yes	To use Scan Workflow of SafeQ6 on Native OpenAPI Terminal, use the FW: A92E0Y0-F000-G00-K8 or later.
Konica Minolta	558	bizhub	Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE-V3	Yes	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2.	Yes	Yes	No	No	No	No	Yes	Yes
Konica Minolta	458	bizhub	Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE-V3	Yes	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2.	Yes	Yes	No	No	No	No	Yes	Yes
Konica Minolta	368	bizhub	Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE-V3	Yes	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2.	Yes	Yes	No	No	No	No	Yes	Yes
Konica Minolta	308	bizhub	Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE-V3	Yes	Yes	Yes	MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2.	Yes	Yes	No	No	No	No	Yes	Yes
Fuji Xerox	Docu Centre V C3374	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No	Tested FW C2276: Controller ROM: 1.2.2 SJFI: 3.10.0 SSMI: 1.25.4 Contents: 2.0.12 Plugin: 1.0.6 RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) USB card reader is suported with XCP terminal. 2nd Gen Browser terminal is not tested. When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Sharp	MX-6070N	Phoenix	Yes	Yes	Yes	Yes	Yes	No	SHARP-MFP-COL-A3-MX2614N	No	Yes	Yes	Recommended driver: SHARP-MFP-COL-A3-MX2614N Limitations: ach A3 is accounted as 2xA4. uplex detection during copying is not 100% accurate. Limitation of blocking interface: It is not possible to block scan menu. ost script license is required for YSoft Mobile print server.	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ 5 MU34+ recommended OSA 5.0
Sharp	MX-5070N	Phoenix	Yes	Yes	Yes	Yes	Yes	No	SHARP-MFP-COL-A3-MX2614N	No	Yes	Yes	Recommended driver: SHARP-MFP-COL-A3-MX2614N Limitations: ach A3 is accounted as 2xA4. uplex detection during copying is not 100% accurate. Limitation of blocking interface: It is not possible to block scan menu. ost script license is required for YSoft Mobile print server.	Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 5 MU34+ recommended OSA 5.0
Sharp	MX-5050N	Griffin	Yes	Yes	Yes	Yes	No	No	SHARP-MFP-COL-A3-MX2614N	No	Yes	Yes	Recommended driver: SHARP-MFP-COL-A3-MX2614N Limitations: Each A3 is accounted as 2xA4. Duplex detection during copying is not 100% accurate. Limitation of blocking interface: It is not possible to block scan menu. Post script license is required for YSoft Mobile print server.	Yes	Yes	No	No	No	No	Yes	No	MX-AMX2 and/or MX-AMX3 modules for OSA support required. See YSoft SafeQ documentation for more details. Title: YSoft SafeQ Embedded Terminal for Sharp OSA SafeQ 5 MU34+ recommended OSA 5.0
Sharp	MX-6050N	Griffin	Yes	Yes	Yes	Yes	No	No	SHARP-MFP-COL-A3-MX2614N	No	Yes	Yes	Recommended driver: SHARP-MFP-COL-A3-MX2614N Limitations: Each A3 is accounted as 2xA4. Duplex detection during copying is not 100% accurate. Limitation of blocking interface: It is not possible to block scan menu. Post script license is required for YSoft Mobile print server.	Yes	Yes	No	No	No	No	Yes	No	MX-AMX2 and/or MX-AMX3 modules for OSA support required. See YSoft SafeQ documentation for more details. Title: YSoft SafeQ Embedded Terminal for Sharp OSA SafeQ 5 MU34+ recommended OSA 5.0
Oki	MC573		Yes	No	Yes	Yes	No	No	OKI-MFP-COL-A4-MC573	No	No	No	Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information. Duplex jobs having odd number of pages can be accounted with one more black and white page. Status detection is supported for following device language settings: English. Device does not send accounting information during sleep mode.	No	Yes	No	Yes	No	No	Yes	No	YSoft SafeQ 5 MU39+ recommended for Embedded terminal. LD device from YSoft SafeQ 6 MU17.
Toshiba	e-STUDIO 5506AC	Shasta	Yes	Yes	Yes	Yes	No	No	TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK, TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	No	Yes
Toshiba	e-STUDIO 6506AC	Shasta	Yes	Yes	Yes	Yes	No	No	TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK, TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	No	Yes
Toshiba	e-STUDIO 7506AC	Shasta	Yes	Yes	Yes	Yes	No	No	TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK, TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS	No	No	No	Common ADF/Cover/Door must be closed before and after print/copy or the device is not considered as ready. Duplex print is detected from print job parser. Duplex copy in NUP is accounted as simplex. Scan counter starts from 1. Driver can be set for offline copy accounting. There is a 5 seconds timeout after print. There is a 5 seconds timeout after copy. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-1CLICK This driver is for "Large paper=1clicks" counter MFD setting. TOSHIBA-MFP-COL-A3-v3-GEN-TOTAL-2CLICKS This driver is for "Large paper=2clicks" counter MFD setting.	No	No	No	No	No	No	No	Yes
Ricoh	Aficio MP C7501		Yes	Yes	Yes	Yes	Yes	No	RICOH-MFP-COLOR-4000, RICOH-C6501-FIERY	No	No	No	Recommended driver:RICOH-MFP-COLOR-4000 With Fiery:RICOH-C6501-FIERY Limitations:This driver cannot be used with SafeQ 3.6 with Embedded Terminal.	Yes	No	No	No	No	No	Yes	Yes	SDK 7.x HDD required. Display: WVGA (800x480)
HP	LaserJet Enterprise M806	LaserJet	No	Yes	No	Yes	No	No	HP-PRN-BW-A3-M712	No	No	No	Recommended driver: HP-PRN-BW-A3-M712 Limitations: All counters start with 1.	No	No	No	No	No	No	No	No
Sharp	MX-4050N	Griffin	Yes	Yes	Yes	Yes	No	No	SHARP-MFP-COL-A3-MX2614N	No	Yes	Yes	Recommended driver: SHARP-MFP-COL-A3-MX2614N Limitations: Each A3 is accounted as 2xA4. Duplex detection during copying is not 100% accurate. Limitation of blocking interface: It is not possible to block scan menu. Post script license is required for YSoft Mobile print server.	Yes	Yes	No	No	No	No	Yes	No	MX-AMX2 and/or MX-AMX3 modules for OSA support required. See YSoft SafeQ documentation for more details. Title: YSoft SafeQ Embedded Terminal for Sharp OSA SafeQ 5 MU34+ recommended
Sharp	MX-3550N	Griffin	Yes	Yes	Yes	Yes	No	No	SHARP-MFP-COL-A3-MX2614N	No	Yes	Yes	Recommended driver: SHARP-MFP-COL-A3-MX2614N Limitations: Each A3 is accounted as 2xA4. Duplex detection during copying is not 100% accurate. Limitation of blocking interface: It is not possible to block scan menu. Post script license is required for YSoft Mobile print server.	Yes	Yes	No	No	No	No	Yes	No	MX-AMX2 and/or MX-AMX3 modules for OSA support required. See YSoft SafeQ documentation for more details. Title: YSoft SafeQ Embedded Terminal for Sharp OSA SafeQ 5 MU34+ recommended
Sharp	MX-3050N	Griffin	Yes	Yes	Yes	Yes	No	No	SHARP-MFP-COL-A3-MX2614N	No	Yes	Yes	Recommended driver: SHARP-MFP-COL-A3-MX2614N Limitations: Each A3 is accounted as 2xA4. Duplex detection during copying is not 100% accurate. Limitation of blocking interface: It is not possible to block scan menu. Post script license is required for YSoft Mobile print server.	Yes	Yes	No	No	No	No	Yes	No	MX-AMX2 and/or MX-AMX3 modules for OSA support required. See YSoft SafeQ documentation for more details. Title: YSoft SafeQ Embedded Terminal for Sharp OSA SafeQ 5 MU34+ recommended
Ricoh	MP 601SPF		Yes	No	No	Yes	No	No	RICOH-MFP-BW-A4-DUP-501SPF	No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
Ricoh	MP 501SPF		Yes	No	No	Yes	No	No	RICOH-MFP-BW-A4-DUP-501SPF	No	No	No		Yes	Yes	No	No	No	No	Yes	Yes	Ricoh Embedded terminal: - Java J/SDK 12.x and HDD required Ricoh SOP Embedded terminal: - J/SDK is optional.
HP	Color LaserJet M855	LaserJet	No	Yes	Yes	Yes	No	No	HP-PRN-COL-A3-M855	No	No	No	Recommended driver: HP-PRN-COL-A3-M855 Limitations: If device runs out of paper during print/copy, counter differences may occur. There is a 3 seconds timeout after print.	No	No	No	No	No	No	No	No	FutureSmart 4 firmware required.
HP	PageWide MFP 586	PageWide	Yes	No	Yes	Yes	No	No	HP-MFP-COL-A4-586	No	No	No	Recommended driver: HP-MFP-COL-A4-586 Limitations: Counters for copy and print are shared.	Yes	Yes	No	No	No	No	Yes	Yes	YSoft SafeQ 5 MU39 and later recommended YSoft SafeQ 6 MU19 and later recommended USB reader supported with firmware version bundle 4.6.0.1 and later.
Samsung	SL-C3010ND		No	No	Yes	Yes	No	No	SAMSUNG-PRN-COL-A4-CLP680	No	No	No	Recommended driver: SAMSUNG-PRN-COL-A4-CLP680 Limitations: Status detection is supported for following languages: English. When the device runs out of paper during print jobs are accounted after the paper is refilled.	No	No	No	No	No	No	No	No
Develop	ineo+ 368		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
Develop	ineo+ 308		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
Develop	ineo+ 258		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	To use self-card-registration and billing code (Billing code selection after login) feature use FW version GC1-54 or newer.
Develop	ineo+ 3350		Yes	No	Yes	Yes	Yes	No	MINOLTA-MFP-COL-BIZHUB-C3850	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-BIZHUB-C3850 Limitations: Required firmware for blocking: A3GN30G0206-999 or newer.	No	Yes	No	No	No	No	Yes	Yes
Develop	ineo+ 3850		Yes	No	Yes	Yes	Yes	No	MINOLTA-MFP-COL-BIZHUB-C3850	No	Yes	Yes	Recommended driver:MINOLTA-MFP-COL-BIZHUB-C3850 Limitations: Required firmware for blocking: A3GN30G0206-999 or newer.	No	Yes	No	No	No	No	Yes	Yes
Develop	Ineo 754e		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-83	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101) OpenApi version 3.7.2 supported so far.
Develop	Ineo 654e		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting. When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-83	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101) OpenApi version 3.7.2 supported so far.
Develop	Ineo 554e		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE	No	Yes	Yes	Recommended driver:MINOLTA-MFP-BW-A3-XXXE Limitations:There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy.Duplex print is accounted according to parser from job information.	Yes	Yes	No	No	No	No	Yes	No
Develop	Ineo 454e		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	No	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101)
Develop	Ineo 364e		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101)
Develop	Ineo 284e		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101)
Develop	Ineo 224e		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. A device must be set to mode 2. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101)
Develop	Ineo+ 754e		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101) OpenApi version 3.7.2 supported so far. When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-63
Develop	Ineo+ 654e		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101) OpenApi version 3.7.2 supported so far. When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-63
Develop	Ineo+ 554e		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101) OpenApi version 3.7.2 supported so far. When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-63
Develop	Ineo+ 454e		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101) OpenApi version 3.7.2 supported so far. When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-63
Develop	Ineo+ 364e		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101) OpenApi version 3.7.2 supported so far. When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-63
Develop	Ineo+ 284e		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101) OpenApi version 3.7.2 supported so far. When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-63
Develop	Ineo+ 224e		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2, MINOLTA-MFP-COL-A3-CXXXE-V3, MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW	No	Yes	Yes	Recommended driver: MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. Each 2color print is accounted as a color print. Each single color or 2color copy is accounted as a color copy. A device must be set to total counter mode 2. MINOLTA-MFP-COL-A3-CXXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a full-color print. Each 1 color and 2colors copy is accounted as a full-color copy. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. MINOLTA-MFP-COL-A3-CXXXE-V3-M1-BW Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each 2 colors print is accounted as a BW print. Each 1 color and 2colors copy is accounted as a BW copy. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit (LK-101) OpenApi version 3.7.2 supported so far. When blocked with Vender2 cable, online accounting does not work, machine is not increasing counters. This problem can be solved by using firmware version GD1-63
Develop	Ineo+ 754		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	Yes	Yes	Recommended driver:MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations:There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy.Duplex print is accounted according to parser from job information.Each 2color print is accounted as a color print.Each single color or 2color copy is accounted as a color copy.	Yes	Yes	No	No	No	No	Yes	Yes	Native: HDD: 250GB, Memory: 2GB (already built in) Native with MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit Recommended latest firmware (above G20-58). USB print without re-authentication when using IC card authentication is supported only with OpenAPI 4.0 Duplex scan workflow not supported with Native Embedded terminal.
Develop	Ineo+ 654		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	Yes	Yes	Recommended driver:MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations:There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy.Duplex print is accounted according to parser from job information.Each 2color print is accounted as a color print.Each single color or 2color copy is accounted as a color copy.	Yes	Yes	No	No	No	No	Yes	Yes	Native: HDD: 250GB, Memory: 2GB (already built in) Native with MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) Browser with/without MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) LK-101v3 iOption License Kit Recommended latest firmware (above G20-58). USB print without re-authentication when using IC card authentication is supported only with OpenAPI 4.0 Duplex scan workflow not supported with Native Embedded terminal.
Develop	Ineo+ 554		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	Yes	Yes	Recommended driver:MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations:There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy.Duplex print is accounted according to parser from job information.Each 2color print is accounted as a color print.Each single color or 2color copy is accounted as a color copy.	Yes	Yes	No	No	No	No	Yes	Yes	Native: HDD: 250GB and Memory: 2GB built in by default Native with MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) Browser with/without MyPanel: HDD: 250GB, Memory: 4GB (extended memory UK-204), LK-101v3 iOption License Kit Recommended latest firmware (above G20-58). USB print without re-authentication when using IC card authentication is supported only with OpenAPI 4.0 Duplex scan workflow not supported with Native Embedded terminal.
Develop	Ineo+ 454		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	Yes	Yes	Recommended driver:MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations:There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy.Duplex print is accounted according to parser from job information.Each 2color print is accounted as a color print.Each single color or 2color copy is accounted as a color copy.	Yes	Yes	No	No	No	No	Yes	Yes	Native: HDD: 250GB and Memory: 2GB built in by default Native with MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) Browser with/without MyPanel: HDD: 250GB, Memory: 4GB (extended memory UK-204), LK-101v3 iOption License Kit Recommended latest firmware (above G20-58). USB print without re-authentication when using IC card authentication is supported only with OpenAPI 4.0 Duplex scan workflow not supported with Native Embedded terminal.
Develop	Ineo+ 364		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	Yes	Yes	Recommended driver:MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations:There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy.Duplex print is accounted according to parser from job information.Each 2color print is accounted as a color print.Each single color or 2color copy is accounted as a color copy.	Yes	Yes	No	No	No	No	Yes	No	Native: HDD: 250GB and Memory: 2GB built in by default Native with MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) Browser with/without MyPanel: HDD: 250GB, Memory: 4GB (extended memory UK-204), LK-101v3 iOption License Kit Recommended latest firmware (above G20-58). USB print without re-authentication when using IC card authentication is supported only with OpenAPI 4.0 Duplex scan workflow not supported with Native Embedded terminal.
Develop	Ineo+ 284		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	Yes	Yes	Recommended driver:MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations:There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy.Duplex print is accounted according to parser from job information.Each 2color print is accounted as a color print.Each single color or 2color copy is accounted as a color copy.	Yes	Yes	No	No	No	No	Yes	Yes	Native: HDD: 250GB and Memory: 2GB built in by default Native with MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) Browser with/without MyPanel: HDD: 250GB, Memory: 4GB (extended memory UK-204), LK-101v3 iOption License Kit Recommended latest firmware (above G20-58). USB print without re-authentication when using IC card authentication is supported only with OpenAPI 4.0 Duplex scan workflow not supported with Native Embedded terminal.
Develop	Ineo+ 224		Yes	Yes	Yes	Yes	Yes	No	MINOLTA-MFP-COL-A3-CXXXE-V2	No	Yes	Yes	Recommended driver:MINOLTA-MFP-COL-A3-CXXXE-V2 Limitations:There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy.Duplex print is accounted according to parser from job information.Each 2color print is accounted as a color print.Each single color or 2color copy is accounted as a color copy.	Yes	Yes	No	No	No	No	Yes	Yes	Native: HDD: 250GB and Memory: 2GB built in by default Native with MyPanel: HDD: 250GB Memory: 4GB (extended memory UK-204) Browser with/without MyPanel: HDD: 250GB, Memory: 4GB (extended memory UK-204), LK-101v3 iOption License Kit Recommended latest firmware (above G20-58). USB print without re-authentication when using IC card authentication is supported only with OpenAPI 4.0 Duplex scan workflow not supported with Native Embedded terminal.
Develop	Ineo 754		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Duplex scan workflow not supported with Native Embedded terminal.
Develop	Ineo 654		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-BW-A3-XXXE, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	Recommended driver: MINOLTA-MFP-BW-A3-XXXE Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is accounted according to parser from job information. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Duplex scan workflow not supported with Native Embedded terminal.
Develop	Ineo 423		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	Recommended driver: MINOLTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2 Limitations: There are 3 seconds timeouts after copy and print. Additional busy state recognition from number of active jobs. This driver is suitable for Mode2 accounting. Offline copy accounting enabled. A3 scan is accounted as 2xA4. Each scan is accounted also as a copy with 0 pages. Separate counters for print and copy. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: HDD: 250GB (HDD HD-516), Memory: 2GB Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 3GB (extended memory UK-203), LK-101 iOption License Kit Recommended latest FW for embedded terminal.
Develop	Ineo 363		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	Recommended driver: MINOLTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2 Limitations: There are 3 seconds timeouts after copy and print. Additional busy state recognition from number of active jobs. This driver is suitable for Mode2 accounting. Offline copy accounting enabled. A3 scan is accounted as 2xA4. Each scan is accounted also as a copy with 0 pages. Separate counters for print and copy. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	No	No	Yes	No	Native: HDD: 250GB (HDD HD-516), Memory: 2GB Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 3GB (extended memory UK-203), LK-101 iOption License Kit Recommended latest FW for embedded terminal.
Develop	Ineo 283		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	Recommended driver: MINOLTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2 Limitations: There are 3 seconds timeouts after copy and print. Additional busy state recognition from number of active jobs. This driver is suitable for Mode2 accounting. Offline copy accounting enabled. A3 scan is accounted as 2xA4. Each scan is accounted also as a copy with 0 pages. Separate counters for print and copy. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: HDD: 250GB (HDD HD-516), Memory: 2GB Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 3GB (extended memory UK-203), LK-101 iOption License Kit Recommended latest FW for embedded terminal.
Develop	Ineo 223		Yes	Yes	No	Yes	Yes	No	MINOLTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2, MINOLTA-MFP-BW-A3-XXXE-V3, MINOLTA-MFP-BW-A3-XXXE-V3-M1	No	Yes	Yes	Recommended driver: MINOLTA-MFP-A3-DUP-SCAN-BIZHUB-363-V2 Limitations: There are 3 seconds timeouts after copy and print. Additional busy state recognition from number of active jobs. This driver is suitable for Mode2 accounting. Offline copy accounting enabled. A3 scan is accounted as 2xA4. Each scan is accounted also as a copy with 0 pages. Separate counters for print and copy. MINOLTA-MFP-BW-A3-XXXE-V3 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Each A3 Scan page is accounted as two A4 Scan pages. (Total counter mdoe 2 behavior) Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 2" MFD setting. A device must be set to total counter mode 2. MINOLTA-MFP-BW-A3-XXXE-V3-M1 Limitations: There is a 3 seconds timeout after print. There is a 3 seconds timeout after copy. Duplex print is detected from print job parser. Driver can be set for offline copy accounting. Login during incoming/outgoing FAX is possible when KeyCounter cable is used. This driver is for "total counter mode 1" MFD setting.	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Native: HDD: 250GB (HDD HD-516), Memory: 2GB Native with MyPanel: HDD: 250GB (HDD HD-516) Memory: 3GB (extended memory UK-203) Browser with/without MyPanel: HDD: 250GB (HDD-HD-516), Memory: 3GB (extended memory UK-203), LK-101 iOption License Kit Recommended latest FW for embedded terminal.
Lanier	124		Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	245		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	235		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	230		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	225		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	270		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2238C		Yes	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2232C		Yes	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	228C		Yes	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2220		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2105 EB-105EX		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2105		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2090 EB-105EX		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2090		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	175		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	160		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	151		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2045e		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2045		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2035e		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2035		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2032		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2027		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2022		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2020D		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2020		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2018D		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2018		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2016		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	2015		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	1515		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	1232C		Yes	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	1224C		Yes	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	1075		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	1060		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	1045		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	1035		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	1032		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	1027		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	1022		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	1018D		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	1018		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	1015		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	1013F		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Lanier	MP 5002		Yes	Yes	No	Yes	Yes	No	RICOH-MFP-BW-A3-4002	No	No	No	Recommended driver:RICOH-MFP-BW-A3-4002 Limitations:none	Yes	Yes	No	No	No	No	Yes	No	SDK/J 10.x Payment System not supported on SafeQ 5
Lanier	MP 4002		Yes	Yes	No	Yes	Yes	No	RICOH-MFP-BW-A3-4002	No	No	No	Recommended driver:RICOH-MFP-BW-A3-4002 Limitations:none	Yes	Yes	No	No	No	No	Yes	No	SDK/J 10.x Payment System not supported on SafeQ 5
Lanier	MP C7500 Series	Aficio MP C6000/C7500 Series	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	SDK/J 4.0.x F Display: WVGA (800x480)
Lanier	MP C6000 Series	Aficio MP C6000/C7500 Series	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	SDK/J 4.0.x F Display: WVGA (800x480)
Lanier	MP 3350 Series	Aficio MP 2550/3350 Series	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	SDK/J 4.0.x F Display: WVGA (800x480)
Lanier	MP 2550 Series	Russian-C5c	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	SDK/J 4.0.x F Display: WVGA (800x480)
Lanier	MP 5000 Series	Alex C1c	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	SDK/J 4.0.x F Display: WVGA (800x480)
Lanier	MP 4000 Series	Alex C1b	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	SDK/J 4.0.x F Display: WVGA (800x480)
Brother	MFC-L6900DW	Brother	Yes	No	No	Yes	No	No	BROTHER-MFP-BW-A4-7065DN	No	No	Yes	Recommended driver: BROTHER-MFP-BW-A4-7065DN Limitations: Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information.	No	Yes	No	Yes	No	No	No	Yes	YSoft SafeQ 6 MU30 to Build 34 requires EAP license. Later versions without EAP.
Brother	HL- 6180DW	Brother	No	No	No	Yes	No	No	BROTHER-PRN-BW-A4-HL6180DW	No	Yes	Yes	Recommended driver:BROTHER-PRN-BW-A4-HL6180DW Limitations:Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Brother	HL-5350DN	Brother	No	No	No	Yes	No	No	BROTHER-PRN-COL-A4-HL4570	No	Yes	Yes	Recommended driver:BROTHER-PRN-COL-A4-HL4570 Limitations:Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Brother	HL-5250DN	Brother	No	No	No	Yes	No	No	BROTHER-PRN-COL-A4-HL4570	No	Yes	Yes	Recommended driver:BROTHER-PRN-COL-A4-HL4570 Limitations:Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Brother	HL-4570CDW	Brother	No	No	Yes	Yes	No	No	BROTHER-PRN-COL-A4-HL4570	No	Yes	Yes	Recommended driver:BROTHER-PRN-COL-A4-HL4570 Limitations:Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Brother	MFC-L8850CDW	Brother	Yes	No	Yes	Yes	No	No	BROTHER-MFP-COL-A4-9020CDW	No	Yes	Yes	Recommended driver:BROTHER-MFP-COL-A4-9020CDW Limitations:If the device runs out of paper during print/copy, counter differences may occur.Device is not ready for authentication during sleep mode. Device must be woken up before authentication or direct print.	No	No	No	No	No	No	No	No
Brother	MFC-L9550CDW	Brother	Yes	No	Yes	Yes	No	No	BROTHER-MFP-COL-A4-9020CDW	No	Yes	Yes	Recommended driver:BROTHER-MFP-COL-A4-9020CDW Limitations:If the device runs out of paper during print/copy, counter differences may occur.Device is not ready for authentication during sleep mode. Device must be woken up before authentication or direct print.	No	No	No	No	No	No	No	No
Brother	DCP-7055DCP-7055WDCP-7057DCP-7057WDCP-7060DDCP-7065DNDCP-7070DWMFC-7360MFC-7360NMFC-7362NMFC-7365DNMFC-7460DNMFC-7470DMFC-7820NMFC-7860DNMFC-7860DWFAX-7860DWHL-2280DW	Brother	Yes	No	No	Yes	No	No	BROTHER-MFP-BW-A4-7065DN	No	Yes	Yes	Recommended driver: BROTHER-MFP-BW-A4-7065DN Limitations: Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Brother	HL-S7000DN	Brother	No	No	No	Yes	No	No	BROTHER-PRN-BW-A4-HLS7000DN	No	Yes	Yes	Recommended driver:BROTHER-PRN-BW-A4-HLS7000DN Limitations: There is a 1.5 second timeout after print.	No	No	No	No	No	No	No	No
Brother	MFC-9340CDW	Brother	Yes	No	Yes	Yes	No	No	BROTHER-MFP-COL-A4-9020CDW	No	Yes	Yes	Recommended driver:BROTHER-MFP-COL-A4-9020CDW Limitations:If the device runs out of paper during print/copy, counter differences may occur.Device is not ready for authentication during sleep mode. Device must be woken up before authentication or direct print.	No	No	No	No	No	No	No	No
Brother	MFC-9330CDW	Brother	Yes	No	Yes	Yes	No	No	BROTHER-MFP-COL-A4-9020CDW	No	Yes	Yes	Recommended driver:BROTHER-MFP-COL-A4-9020CDW Limitations:If the device runs out of paper during print/copy, counter differences may occur.Device is not ready for authentication during sleep mode. Device must be woken up before authentication or direct print.	No	No	No	No	No	No	No	No
Brother	MFC-9140CDN	Brother	Yes	No	Yes	Yes	No	No	BROTHER-MFP-COL-A4-9020CDW	No	Yes	Yes	Recommended driver:BROTHER-MFP-COL-A4-9020CDW Limitations:If the device runs out of paper during print/copy, counter differences may occur.Device is not ready for authentication during sleep mode. Device must be woken up before authentication or direct print.	No	No	No	No	No	No	No	No
Brother	MFC-9130CW	Brother	Yes	No	Yes	Yes	No	No	BROTHER-MFP-COL-A4-9020CDW	No	Yes	Yes	Recommended driver:BROTHER-MFP-COL-A4-9020CDW Limitations:If the device runs out of paper during print/copy, counter differences may occur.Device is not ready for authentication during sleep mode. Device must be woken up before authentication or direct print.	No	No	No	No	No	No	No	No
Brother	DCP-9020CDN	Brother	Yes	No	Yes	Yes	No	No	BROTHER-MFP-COL-A4-9020CDW	No	Yes	Yes	Recommended driver: BROTHER-MFP-COL-A4-9020CDW Limitations: If the device runs out of paper during print/copy, counter differences may occur. Device is not ready for authentication during sleep mode. Device must be woken up before authentication or direct print.	No	No	No	No	No	No	No	No	YSoft SafeQ 6 MU30 and newer
Brother	DCP-9020CDW	Brother	Yes	No	Yes	Yes	No	No	BROTHER-MFP-COL-A4-9020CDW	No	Yes	Yes	Recommended driver: BROTHER-MFP-COL-A4-9020CDW Limitations: If the device runs out of paper during print/copy, counter differences may occur. Device is not ready for authentication during sleep mode. Device must be woken up before authentication or direct print.	No	No	No	No	No	No	No	No	YSoft SafeQ 6 MU30 and newer
Brother	HL-4150CDN	Brother	No	No	Yes	Yes	No	No	BROTHER-PRN-COL-A4-HL4140CN	No	Yes	Yes	Recommended driver:BROTHER-PRN-COL-A4-HL4140CN Limitations:Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Brother	HL-4140CN	Brother	No	No	Yes	Yes	No	No	BROTHER-PRN-COL-A4-HL4140CN	No	Yes	Yes	Recommended driver:BROTHER-PRN-COL-A4-HL4140CN Limitations:Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Brother	HL-5470DW	Brother	No	No	No	Yes	No	No	BROTHER-PRN-BW-A4-HL5440D	No	Yes	Yes		No	No	No	No	No	No	No	No
Brother	HL-5450DN	Brother	No	No	No	Yes	No	No	BROTHER-PRN-BW-A4-HL5440D	No	Yes	Yes		No	No	No	No	No	No	No	No
Brother	HL-5440D	Brother	No	No	No	Yes	No	No	BROTHER-PRN-BW-A4-HL5440D	No	Yes	Yes		No	No	No	No	No	No	No	No
Brother	DCP-9270CDN	Brother	Yes	No	Yes	Yes	No	No	BROTHER-MFP-COL-9460CDN	No	Yes	Yes	Recommended driver:BROTHER-MFP-COL-9460CDN Limitations:Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information. Scan from USB is not accounted. Status detection during scan is supported for following languages: English, Hungarian.	No	No	No	No	No	No	No	No
Brother	DCP-9055CDN	Brother	Yes	No	Yes	Yes	No	No	BROTHER-MFP-COL-9460CDN	No	Yes	Yes	Recommended driver:BROTHER-MFP-COL-9460CDN Limitations:Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information. Scan from USB is not accounted. Status detection during scan is supported for following languages: English, Hungarian.	No	No	No	No	No	No	No	No
Brother	MFC-9970CDW	Brother	Yes	No	Yes	Yes	No	No	BROTHER-MFP-COL-9460CDN	No	Yes	Yes	Recommended driver:BROTHER-MFP-COL-9460CDN Limitations:Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information. Scan from USB is not accounted. Status detection during scan is supported for following languages: English, Hungarian.	No	No	No	No	No	No	No	No
Brother	MFC-9460CDN	Brother	Yes	No	Yes	Yes	No	No	BROTHER-MFP-COL-9460CDN	No	Yes	Yes	Recommended driver:BROTHER-MFP-COL-9460CDN Limitations:Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information. Scan from USB is not accounted. Status detection during scan is supported for following languages: English, Hungarian.	No	No	No	No	No	No	No	No
Brother	MFC-8952DW	Brother	Yes	No	No	Yes	No	No	BROTHER-MFP-DUP-8950DW	No	Yes	Yes		No	No	No	No	No	No	No	No
Brother	MFC-8950DW	Brother	Yes	No	No	Yes	No	No	BROTHER-MFP-DUP-8950DW	No	Yes	Yes		No	No	No	No	No	No	No	No
Brother	MFC-8910DW	Brother	Yes	No	No	Yes	No	No	BROTHER-MFP-DUP-8950DW	No	Yes	Yes		No	No	No	No	No	No	No	No
Brother	MFC-8860DN	Brother	Yes	No	No	Yes	No	No	BROTHER-MFP-BW	No	Yes	Yes	Recommended driver:BROTHER-MFP-BW Limitations:Counters for copy and print are shared. Additional busy state recognition from special OID.	No	No	No	No	No	No	No	No
Brother	MFC-8520DN	Brother	Yes	No	No	Yes	No	No	BROTHER-MFP-DUP-8950DW	No	Yes	Yes		No	No	No	No	No	No	No	No
Brother	MFC-8510DN	Brother	Yes	No	No	Yes	No	No	BROTHER-MFP-DUP-8950DW	No	Yes	Yes		No	No	No	No	No	No	No	No
Brother	DCP-9045CDN	Brother	Yes	No	Yes	Yes	No	No	BROTHER-MFP-COLOR	No	Yes	Yes		No	No	No	No	No	No	No	No	no blocking available
Brother	DCP-8250DN	Brother	Yes	No	No	Yes	No	No	BROTHER-MFP-DUP-8950DW	No	Yes	Yes		No	No	No	No	No	No	No	No
Brother	DCP-8110DN	Brother	Yes	No	No	Yes	No	No	BROTHER-MFP-DUP-8950DW	No	Yes	Yes		No	No	No	No	No	No	No	No
Triumph Adler	P-3520MFP		Yes	No	No	Yes	No	No	TRIUMPH-MFP-BW-A4	No	No	No	Recommeded driver:TRIUMPH-MFP-BW-A4 Limitations:Duplex copy is accounted as simplex.Duplex print is accounted according to parser from job information.Each A3 page is accounted as two A4 pages.	No	No	No	No	No	No	No	No
Triumph Adler	P-C2660 MFP		Yes	No	No	Yes	Yes	No	TRIUMPH-MFP-COL-A4-PC2660	No	No	No	Recommended driver:TRIUMPH-MFP-COL-A4-PC2660 Limitations:Duplex copy is accounted as simplex.Duplex print is accounted according to parser from job information.Counters for copy and print are shared.	No	No	No	No	No	No	No	No
Triumph Adler	3560i		Yes	Yes	No	Yes	Yes	No	TRIUMPH-MFP-BW-A3-3555I	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A3-3555I Limitations:Each A3 page is accounted as 2xA4 pages.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	3060i		Yes	Yes	No	Yes	Yes	No	TRIUMPH-MFP-BW-A3-3555I	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A3-3555I Limitations:Each A3 page is accounted as 2xA4 pages.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	5555i	Gaia 2	Yes	Yes	No	Yes	Yes	No	TRIUMPH-MFP-BW-A3-3555I	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A3-3555I Limitations:Each A3 page is accounted as 2xA4 pages.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	4555i	Gaia 2	Yes	Yes	No	Yes	Yes	No	TRIUMPH-MFP-BW-A3-3555I	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A3-3555I Limitations:Each A3 page is accounted as 2xA4 pages.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	3555i	Gaia 2	Yes	Yes	No	Yes	Yes	No	TRIUMPH-MFP-BW-A3-3555I	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A3-3555I Limitations:Each A3 page is accounted as 2xA4 pages.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	2500ci		Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver: TRIUMPH-MFP-COL-A3-3005CI Limitations:Each A3 page is accounted as two A4 pages.Monocolor copy counter starts from 1.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	5505ci	Venus 2	Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver: TRIUMPH-MFP-COL-A3-3005CI Limitations:Each A3 page is accounted as two A4 pages.Monocolor copy counter starts from 1.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	4505ci	Venus 2	Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver: TRIUMPH-MFP-COL-A3-3005CI Limitations:Each A3 page is accounted as two A4 pages.Monocolor copy counter starts from 1.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	3505ci	Venus 2	Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver: TRIUMPH-MFP-COL-A3-3005CI Limitations:Each A3 page is accounted as two A4 pages.Monocolor copy counter starts from 1.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	3005ci	Venus 2	Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver: TRIUMPH-MFP-COL-A3-3005CI Limitations:Each A3 page is accounted as two A4 pages.Monocolor copy counter starts from 1.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	2550ci		Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver: TRIUMPH-MFP-COL-A3-3005CI Limitations:Each A3 page is accounted as two A4 pages.Monocolor copy counter starts from 1.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	306i		Yes	Yes	No	Yes	No	No	TRIUMPH-MFP-BW-A4	No	No	No	Recommeded driver:TRIUMPH-MFP-BW-A4 Limitations:Duplex copy is accounted as simplex.Duplex print is accounted according to parser from job information.Each A3 page is accounted as two A4 pages.	No	No	No	No	No	No	No	No
Triumph Adler	256i		Yes	Yes	No	Yes	No	No	TRIUMPH-MFP-BW-A4	No	No	No	Recommeded driver:TRIUMPH-MFP-BW-A4 Limitations:Duplex copy is accounted as simplex.Duplex print is accounted according to parser from job information.Each A3 page is accounted as two A4 pages.	No	No	No	No	No	No	No	No
Triumph Adler	256ci		Yes	Yes	Yes	Yes	No	No	TRIUMPH-MFP-COL-A3-DCC6520	No	No	No	Recommeded driver:TRIUMPH-MFP-COL-A3-DCC6520 Limitations:Duplex copy is accounted as simplex.Duplex print is accounted according to parser from job information.Each A3 page is accounted as two A4 pages.	No	No	No	No	No	No	No	No
Triumph Adler	206ci		Yes	Yes	Yes	Yes	No	No	TRIUMPH-MFP-COL-A3-DCC6520	No	No	No	Recommeded driver:TRIUMPH-MFP-COL-A3-DCC6520 Limitations:Duplex copy is accounted as simplex.Duplex print is accounted according to parser from job information.Each A3 page is accounted as two A4 pages.	No	No	No	No	No	No	No	No
Triumph Adler	DCC 6525		Yes	Yes	Yes	Yes	No	No	TRIUMPH-MFP-COL-A3-DCC6520	No	No	No	Recommended driver:TRIUMPH-MFP-COL-A3-DCC6520 Limitations:Duplex copy is accounted as simplex.Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Triumph Adler	DCC 6520		Yes	Yes	Yes	Yes	No	No	TRIUMPH-MFP-COL-A3-DCC6520	No	No	No	Recommended driver:TRIUMPH-MFP-COL-A3-DCC6520 Limitations:Duplex copy is accounted as simplex.Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Triumph Adler	DCC 6626		Yes	No	Yes	Yes	No	No	TRIUMPH-MFP-COL-A4-DCC6526	No	No	No	Recommended driver:TRIUMPH-MFP-COL-A4-DCC6526 Limitations:Duplex copy is accounted as simplex.Duplex print is accounted according to parser from job information.Counters for copy and print are shared.	No	No	No	No	No	No	No	No
Triumph Adler	DCC 6526		Yes	No	Yes	Yes	No	No	TRIUMPH-MFP-COL-A4-DCC6526	No	No	No	Recommended driver:TRIUMPH-MFP-COL-A4-DCC6526 Limitations:Duplex copy is accounted as simplex.Duplex print is accounted according to parser from job information.Counters for copy and print are shared.	No	No	No	No	No	No	No	No
Triumph Adler	DC 6235		Yes	No	No	Yes	No	No	TRIUMPH-MFP-BW-A4	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A4 Limitations:Duplex print is accounted according to parser from job information.Duplex copy is accounted as simplex.	No	No	No	No	No	No	No	No
Triumph Adler	DC 6135		Yes	No	No	Yes	No	No	TRIUMPH-MFP-BW-A4	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A4 Limitations:Duplex print is accounted according to parser from job information.Duplex copy is accounted as simplex.	No	No	No	No	No	No	No	No
Triumph Adler	DC 6230		Yes	No	No	Yes	No	No	TRIUMPH-MFP-BW-A4	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A4 Limitations:Duplex print is accounted according to parser from job information.Duplex copy is accounted as simplex.	No	No	No	No	No	No	No	No
Triumph Adler	DC 6130		Yes	No	No	Yes	No	No	TRIUMPH-MFP-BW-A4	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A4 Limitations:Duplex print is accounted according to parser from job information.Duplex copy is accounted as simplex.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2440		Yes	No	No	Yes	Yes	No	TRIUMPH-MFP-BW-A4	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A4 Limitations:Duplex print is accounted according to parser from job information.Duplex copy is accounted as simplex.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2340		Yes	No	No	Yes	Yes	No	TRIUMPH-MFP-BW-A4	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A4 Limitations:Duplex print is accounted according to parser from job information.Duplex copy is accounted as simplex.	No	No	No	No	No	No	No	No
Triumph Adler	DC 6240L		Yes	No	No	Yes	Yes	No	TRIUMPH-MFP-BW-A4	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A4 Limitations:Duplex print is accounted according to parser from job information.Duplex copy is accounted as simplex.	No	No	No	No	No	No	No	No
Triumph Adler	DC 6140L		Yes	No	No	Yes	Yes	No	TRIUMPH-MFP-BW-A4	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A4 Limitations:Duplex print is accounted according to parser from job information.Duplex copy is accounted as simplex.	No	No	No	No	No	No	No	No
Triumph Adler	DC 6240		Yes	No	No	Yes	Yes	No	TRIUMPH-MFP-BW-A4	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A4 Limitations:Duplex print is accounted according to parser from job information.Duplex copy is accounted as simplex.	No	No	No	No	No	No	No	No
Triumph Adler	DC 6140		Yes	No	No	Yes	Yes	No	TRIUMPH-MFP-BW-A4	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A4 Limitations:Duplex print is accounted according to parser from job information.Duplex copy is accounted as simplex.	No	No	No	No	No	No	No	No
Triumph Adler	DCC 2950	Venus	Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver:TRIUMPH-MFP-COL-A3-3005CI Limitations:Each A3 page is accounted as two A4 pages.Monocolor copy counter starts from 1.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	DCC 2945	Venus	Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver:TRIUMPH-MFP-COL-A3-3005CI Limitations:Each A3 page is accounted as two A4 pages.Monocolor copy counter starts from 1.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	DCC 2935	Venus	Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver:TRIUMPH-MFP-COL-A3-3005CI Limitations:Each A3 page is accounted as two A4 pages.Monocolor copy counter starts from 1.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	DCC 2930	Venus	Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver:TRIUMPH-MFP-COL-A3-3005CI Limitations:Each A3 page is accounted as two A4 pages.Monocolor copy counter starts from 1.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	LP 4335		No	No	No	Yes	No	No	TRIUMPH-PRN-BW-A4-LP4130	No	No	No	Recommended driver:TRIUMPH-PRN-BW-A4-LP4130 Limitations:There is a 2 seconds timeout after print. Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Triumph Adler	LP 4135		No	No	No	Yes	No	No	TRIUMPH-PRN-BW-A4-LP4130	No	No	No	Recommended driver:TRIUMPH-PRN-BW-A4-LP4130 Limitations:There is a 2 seconds timeout after print. Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Triumph Adler	LP 4130		No	No	No	Yes	No	No	TRIUMPH-PRN-BW-A4-LP4130	No	No	No	Recommended driver:TRIUMPH-PRN-BW-A4-LP4130 Limitations:There is a 2 seconds timeout after print. Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Triumph Adler	LP 4240		No	No	No	Yes	No	No	TRIUMPH-BW-A4	No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DC 2850	Saturn	Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver:TRIUMPH-MFP-COL-A3-3005CI Limitations:Each A3 page is accounted as two A4 pages.Monocolor copy counter starts from 1.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2840	Saturn	Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver:TRIUMPH-MFP-COL-A3-3005CI Limitations:Each A3 page is accounted as two A4 pages.Monocolor copy counter starts from 1.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2740	Saturn	Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver:TRIUMPH-MFP-COL-A3-3005CI Limitations:Each A3 page is accounted as two A4 pages.Monocolor copy counter starts from 1.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2730	Saturn	Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver:TRIUMPH-MFP-COL-A3-3005CI Limitations:Each A3 page is accounted as two A4 pages.Monocolor copy counter starts from 1.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	DCC 2725	Saturn	Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-MFP-COL-A3-3005CI	No	No	No	Recommeded driver:TRIUMPH-MFP-COL-A3-3005CI Limitations:Each A3 page is accounted as two A4 pages.Monocolor copy counter starts from 1.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2635		Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-COL-A4-MFP	No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DC 2632		Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-COL-A4-MFP	No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DCC 2625		Yes	Yes	Yes	Yes	Yes	No	TRIUMPH-COL-A4-MFP	No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DC 2455		Yes	Yes	No	Yes	Yes	No	TRIUMPH-MFP-BW-A3-3555I	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A3-3555I Limitations:Each A3 page is accounted as 2xA4 pages.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2445		Yes	Yes	No	Yes	Yes	No	TRIUMPH-MFP-BW-A3-3555I	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A3-3555I Limitations:Each A3 page is accounted as 2xA4 pages.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2435		Yes	Yes	No	Yes	Yes	No	TRIUMPH-MFP-BW-A3-3555I	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A3-3555I Limitations:Each A3 page is accounted as 2xA4 pages.Status detection during scan transfer is not supported.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2080		Yes	Yes	No	Yes	Yes	No	TRIUMPH-BW-A3-MFP	No	No	No	Recommended driver:TRIUMPH-BW-A3-MFP Limitations:Counters for copy and print are shared.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2060		Yes	Yes	No	Yes	Yes	No	TRIUMPH-BW-A3-MFP	No	No	No	Recommended driver:TRIUMPH-BW-A3-MFP Limitations:Counters for copy and print are shared.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2250		Yes	Yes	No	Yes	Yes	No	TRIUMPH-BW-A3-MFP	No	No	No	Recommended driver:TRIUMPH-BW-A3-MFP Limitations:Counters for copy and print are shared.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2240		Yes	Yes	No	Yes	Yes	No	TRIUMPH-BW-A3-MFP	No	No	No	Recommended driver:TRIUMPH-BW-A3-MFP Limitations:Counters for copy and print are shared.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2230		Yes	Yes	No	Yes	Yes	No	TRIUMPH-BW-A3-MFP	No	No	No	Recommended driver:TRIUMPH-BW-A3-MFP Limitations:Counters for copy and print are shared.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2222		Yes	Yes	No	Yes	No	No	TRIUMPH-MFP-BW-A3-DC2218	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A3-DC2218 Limitations:Counters for copy and print are shared.Duplex prints are accounted according to parser from job information.Duplex copies are accounted as simplex.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2218		Yes	Yes	No	Yes	No	No	TRIUMPH-MFP-BW-A3-DC2218	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A3-DC2218 Limitations:Counters for copy and print are shared.Duplex prints are accounted according to parser from job information.Duplex copies are accounted as simplex.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2125		Yes	Yes	No	Yes	Yes	No	TRIUMPH-BW-A3-MFP	No	No	No	Recommended driver:TRIUMPH-BW-A3-MFP Limitations:Counters for copy and print are shared.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2120		Yes	Yes	No	Yes	Yes	No	TRIUMPH-BW-A3-MFP	No	No	No	Recommended driver:TRIUMPH-BW-A3-MFP Limitations:Counters for copy and print are shared.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2116		Yes	Yes	No	Yes	Yes	No	TRIUMPH-BW-A3-MFP	No	No	No	Recommended driver:TRIUMPH-BW-A3-MFP Limitations:Counters for copy and print are shared.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2328		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DC 2228		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DC 2128		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DC 2028		Yes	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Triumph Adler	DC 2316		Yes	No	No	Yes	No	No	TRIUMPH-MFP-BW-A4	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A4 Limitations:Duplex print is accounted according to parser from job information.Duplex copy is accounted as simplex.	No	No	No	No	No	No	No	No
Triumph Adler	DC 2018		Yes	No	No	Yes	Yes	No	TRIUMPH-MFP-BW-A4	No	No	No	Recommended driver:TRIUMPH-MFP-BW-A4 Limitations:Duplex print is accounted according to parser from job information.Duplex copy is accounted as simplex.	No	No	No	No	No	No	No	No
Canon	iR ADV 4251i	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW-A3-iR42xx	No	No	No	Recommended driver:CANON-MFP-BW-A3-iR42xx Limitations:Counters for copy and print are shared.There is a 1 second timeout after print.There is a 1 second timeout after copy.Scan to USB is not accounted.	No	No	No	No	No	No	No	No
Canon	iR ADV 4245i	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW-A3-iR42xx	No	No	No	Recommended driver:CANON-MFP-BW-A3-iR42xx Limitations:Counters for copy and print are shared.There is a 1 second timeout after print.There is a 1 second timeout after copy.Scan to USB is not accounted.	No	No	No	No	No	No	No	No
Canon	iR ADV 4235i	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW-A3-iR42xx	No	No	No	Recommended driver:CANON-MFP-BW-A3-iR42xx Limitations:Counters for copy and print are shared.There is a 1 second timeout after print.There is a 1 second timeout after copy.Scan to USB is not accounted.	No	No	No	No	No	No	No	No
Canon	iR ADV 4225i	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW-A3-iR42xx	No	No	No	Recommended driver:CANON-MFP-BW-A3-iR42xx Limitations:Counters for copy and print are shared.There is a 1 second timeout after print.There is a 1 second timeout after copy.Scan to USB is not accounted.	No	No	No	No	No	No	No	No
Canon	iR ADV 500i	Image Runner	Yes	No	No	Yes	Yes	No	CANON-MFP-BW-A4-400i	No	No	No	Recommended driver:CANON-MFP-BW-A4-400i Limitations:There is a 500 ms timeout after copy.If device runs out of paper during print, jobs are accounted after the paper is refilled. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR ADV 400i	Image Runner	Yes	No	No	Yes	Yes	No	CANON-MFP-BW-A4-400i	No	No	No	Recommended driver:CANON-MFP-BW-A4-400i Limitations:There is a 500 ms timeout after copy.If device runs out of paper during print, jobs are accounted after the paper is refilled. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR ADV C351iF	Image Runner	Yes	No	Yes	Yes	Yes	No	CANON-MFP-COL-A4-iRC351	No	No	No	Recommended driver:CANON-MFP-COL-A4-iRC351 Limitations:If device runs out of paper during print/copy, jobs are accounted after the paper is refilled.There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	blocking cable requires addtional Canon Kit A1 with 9PIN DSUB connector
Canon	iR ADV C350i	Image Runner	Yes	No	Yes	Yes	Yes	No	CANON-MFP-COL-A4-iRC351	No	No	No	Recommended driver:CANON-MFP-COL-A4-iRC351 Limitations:If device runs out of paper during print/copy, jobs are accounted after the paper is refilled.There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	blocking cable requires addtional Canon Kit A1 with 9PIN DSUB connector
Canon	iR ADV C250i	Image Runner	Yes	No	Yes	Yes	Yes	No	CANON-MFP-COL-A4-iRC351	No	No	No	Recommended driver:CANON-MFP-COL-A4-iRC351 Limitations:If device runs out of paper during print/copy, jobs are accounted after the paper is refilled.There is a 3 seconds timeout after print.There is a 3 seconds timeout after copy. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	blocking cable requires addtional Canon Kit A1 with 9PIN DSUB connector
Canon	iR ADV C5255i	Image Runner	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iR52xx	No	No	No	Recommended driver:CANON-MFP-COL-A3-iR52xx Limitations: Counters for copy and print are shared.There is a 1 second timeout after print.There is a 1 second timeout after copy.Scan to USB is not accounted. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR ADV C5250i	Image Runner	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iR52xx	No	No	No	Recommended driver:CANON-MFP-COL-A3-iR52xx Limitations: Counters for copy and print are shared.There is a 1 second timeout after print.There is a 1 second timeout after copy.Scan to USB is not accounted. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR ADV C5245i	Image Runner	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iR52xx	No	No	No	Recommended driver:CANON-MFP-COL-A3-iR52xx Limitations: Counters for copy and print are shared.There is a 1 second timeout after print.There is a 1 second timeout after copy.Scan to USB is not accounted. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR ADV C5240i	Image Runner	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iR52xx	No	No	No	Recommended driver:CANON-MFP-COL-A3-iR52xx Limitations: Counters for copy and print are shared.There is a 1 second timeout after print.There is a 1 second timeout after copy.Scan to USB is not accounted. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR ADV C5235i	Image Runner	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iR52xx	No	No	No	Recommended driver:CANON-MFP-COL-A3-iR52xx Limitations: Counters for copy and print are shared.There is a 1 second timeout after print.There is a 1 second timeout after copy.Scan to USB is not accounted. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 1750i	Image Runner	Yes	No	No	Yes	Yes	No	CANON-MFP-BW-A4-IR1133	No	No	No	Recommended driver:CANON-MFP-BW-A4-IR1133 Limitations:There is a 1 second timeout after print.There is a 1 second timeout after copy. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 1740i	Image Runner	Yes	No	No	Yes	Yes	No	CANON-MFP-BW-A4-IR1133	No	No	No	Recommended driver:CANON-MFP-BW-A4-IR1133 Limitations:There is a 1 second timeout after print.There is a 1 second timeout after copy. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 1730i	Image Runner	Yes	No	No	Yes	Yes	No	CANON-MFP-BW-A4-IR1133	No	No	No	Recommended driver:CANON-MFP-BW-A4-IR1133 Limitations:There is a 1 second timeout after print.There is a 1 second timeout after copy. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 1133iF	Image Runner	Yes	No	No	Yes	Yes	No	CANON-MFP-BW-A4-IR1133	No	No	No	Recommended driver:CANON-MFP-BW-A4-IR1133 Limitations:There is a 1 second timeout after print.There is a 1 second timeout after copy. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 1133a	Image Runner	Yes	No	No	Yes	Yes	No	CANON-MFP-BW-A4-IR1133	No	No	No	Recommended driver:CANON-MFP-BW-A4-IR1133 Limitations:There is a 1 second timeout after print.There is a 1 second timeout after copy. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 1133	Image Runner	Yes	No	No	Yes	Yes	No	CANON-MFP-BW-A4-IR1133	No	No	No	Recommended driver:CANON-MFP-BW-A4-IR1133 Limitations:There is a 1 second timeout after print.There is a 1 second timeout after copy. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2570C	Image Runner	Yes	Yes	Yes	Yes	No	No	CANON-iR3100C	No	No	No	Recommended driver:CANON-iR3100C Limitations:Counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 113 (A4 B/W) Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR ADV 4051	Image Runner Advance / iR ADV	Yes	Yes	No	Yes	Yes	No	CANON-iR2520-V2	No	No	No	Recommended driver:CANON-iR2520-V2 Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR ADV 4045	Image Runner Advance / iR ADV	Yes	Yes	No	Yes	Yes	No	CANON-iR2520-V2	No	No	No	Recommended driver:CANON-iR2520-V2 Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR ADV 4035	Image Runner Advance / iR ADV	Yes	Yes	No	Yes	Yes	No	CANON-iR2520-V2	No	No	No	Recommended driver:CANON-iR2520-V2 Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR ADV 4025	Image Runner Advance / iR ADV	Yes	Yes	No	Yes	Yes	No	CANON-iR2520-V2	No	No	No	Recommended driver:CANON-iR2520-V2 Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iRC 3580	Image Runner	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iRC3580	No	No	No	Recommended driver:CANON-MFP-COL-A3-iRC3580 Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iRC 2800	Image Runner	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iRC3580	No	No	No	Recommended driver:CANON-MFP-COL-A3-iRC3580 Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR ADV 6075i	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	Yes	No	CANON-iR2520-V2	No	No	No	Recommended driver:CANON-iR2520-V2 Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR ADV 6065i	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	Yes	No	CANON-iR2520-V2	No	No	No	Recommended driver:CANON-iR2520-V2 Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR ADV 6055i	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	Yes	No	CANON-iR2520-V2	No	No	No	Recommended driver:CANON-iR2520-V2 Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR C3200 on EFI	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	No	No	CANON-iR3100C	No	No	No	Recommended driver:CANON-iR3100C Limitations: Counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 113 (A4 B/W) Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR C3200	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	Yes	No	CANON-iR3100C	No	No	No	Recommended driver:CANON-iR3100C Limitations:Counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 113 (A4 B/W) Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	J1317 connector is used for blocking
Canon	iRC 3220	Image Runner	Yes	Yes	Yes	Yes	Yes	No	CANON-iRC2620	No	No	No	Recommended driver:CANON-iRC2620 Limitation:Device state is detected over SNMP. Counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 113 (A4 B/W). Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iRC 2620	Image Runner	Yes	Yes	Yes	Yes	Yes	No	CANON-iRC2620	No	No	No	Recommended driver:CANON-iRC2620 Limitation:Device state is detected over SNMP. Counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 113 (A4 B/W). Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR-ADV C2230i	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-C22XX	No	No	No	Recommended driver:CANON-MFP-COL-A3-C22XX Limitations:Counters for copy and print are shared.Session may be closed prematurely if calibration is in progress. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	YSQC0-047-0000 Blocking Cable (use connector J1026 on the main board) If you have a Kit-A1 available, use this cable: YSQC0-041-0000 - with Kit-A1 (Canon party extension)
Canon	iR-ADV C2225i	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-C22XX	No	No	No	Recommended driver:CANON-MFP-COL-A3-C22XX Limitations:Counters for copy and print are shared.Session may be closed prematurely if calibration is in progress. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	YSQC0-047-0000 Blocking Cable (use connector J1026 on the main board) If you have a Kit-A1 available, use this cable: YSQC0-041-0000 - with Kit-A1 (Canon party extension)
Canon	iR-ADV C2220i	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-C22XX	No	No	No	Recommended driver:CANON-MFP-COL-A3-C22XX Limitations:Counters for copy and print are shared.Session may be closed prematurely if calibration is in progress. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	YSQC0-047-0000 Blocking Cable (use connector J1026 on the main board) If you have a Kit-A1 available, use this cable: YSQC0-041-0000 - with Kit-A1 (Canon party extension)
Canon	iR ADV C5035i	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iRADVC	No	No	No	Recommended driver:CANON-MFP-COL-A3-iRADVC Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	YSQC0-047-0000 Blocking Cable (use connector J1026 on the main board) If you have a Kit-A1 available, use this cable: YSQC0-041-0000 - with Kit-A1 (Canon party extension)
Canon	iR ADV C5051i	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iRADVC	No	No	No	Recommended driver:CANON-MFP-COL-A3-iRADVC Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	YSQC0-047-0000 Blocking Cable (use connector J1026 on the main board) If you have a Kit-A1 available, use this cable: YSQC0-041-0000 - with Kit-A1 (Canon party extension)
Canon	iR ADV C5030i	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iRADVC	No	No	No	Recommended driver:CANON-MFP-COL-A3-iRADVC Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	YSQC0-047-0000 Blocking Cable (use connector J1026 on the main board) If you have a Kit-A1 available, use this cable: YSQC0-041-0000 - with Kit-A1 (Canon party extension)
Canon	iR ADV C2030i	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iRADVC	No	No	No	Recommended driver:CANON-MFP-COL-A3-iRADVC Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	YSQC0-047-0000 Blocking Cable (use connector J1026 on the main board) If you have a Kit-A1 available, use this cable: YSQC0-041-0000 - with Kit-A1 (Canon party extension)
Canon	iR ADV C2025i	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iRADVC	No	No	No	Recommended driver:CANON-MFP-COL-A3-iRADVC Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	YSQC0-047-0000 Blocking Cable (use connector J1026 on the main board) If you have a Kit-A1 available, use this cable: YSQC0-041-0000 - with Kit-A1 (Canon party extension)
Canon	iR ADV C2020i	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iRADVC	No	No	No	Recommended driver:CANON-MFP-COL-A3-iRADVC Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	YSQC0-047-0000 Blocking Cable (use connector J1026 on the main board) If you have a Kit-A1 available, use this cable: YSQC0-041-0000 - with Kit-A1 (Canon party extension)
Canon	iR ADV C5045i	Image Runner Advance / iR ADV	Yes	Yes	Yes	Yes	Yes	No	CANON-MFP-COL-A3-iRADVC	No	No	No	Recommended driver:CANON-MFP-COL-A3-iRADVC Limitations:Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	YSQC0-047-0000 Blocking Cable (use connector J1026 on the main board) If you have a Kit-A1 available, use this cable: YSQC0-041-0000 - with Kit-A1 (Canon party extension)
Canon	iRC 3100	Image Runner	Yes	Yes	Yes	Yes	Yes	No	CANON-iR3100C	No	No	No	Recommended driver:CANON-iR3100C Limitations:Counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 113 (A4 B/W) Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 3245n	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW-A3-iR3245	No	No	No	Recommended driver: CANON-MFP-BW-A3-iR3245 Limitations: Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 3235n	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW-A3-iR3245	No	No	No	Recommended driver: CANON-MFP-BW-A3-iR3245 Limitations: Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 3225n	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW-A3-iR3245	No	No	No	Recommended driver: CANON-MFP-BW-A3-iR3245 Limitations: Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 3320N	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-iR2200	No	No	No	Recommended driver:CANON-iR2200 Limitations:Enhanced detection of device status. There is 5 seconds timeout after copy. Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 3320i	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-iR2200	No	No	No	Recommended driver:CANON-iR2200 Limitations:Enhanced detection of device status. There is 5 seconds timeout after copy. Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 3300EN	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-iR2200	No	No	No	Recommended driver:CANON-iR2200 Limitations:Enhanced detection of device status. There is 5 seconds timeout after copy. Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 3300E	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-iR2200	No	No	No	Recommended driver:CANON-iR2200 Limitations:Enhanced detection of device status. There is 5 seconds timeout after copy. Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 3300i	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-iR2200	No	No	No	Recommended driver:CANON-iR2200 Limitations:Enhanced detection of device status. There is 5 seconds timeout after copy. Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 3300	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-iR2200	No	No	No	Recommended driver:CANON-iR2200 Limitations:Enhanced detection of device status. There is 5 seconds timeout after copy. Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2800	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-iR2200	No	No	No	Recommended driver:CANON-iR2200 Limitations:Enhanced detection of device status. There is 5 seconds timeout after copy. Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2220N	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-iR2200	No	No	No	Recommended driver:CANON-iR2200 Limitations:Enhanced detection of device status. There is 5 seconds timeout after copy. Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2220i	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-iR2200	No	No	No	Recommended driver:CANON-iR2200 Limitations:Enhanced detection of device status. There is 5 seconds timeout after copy. Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2200	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-iR2200	No	No	No	Recommended driver:CANON-iR2200 Limitations:Enhanced detection of device status. There is 5 seconds timeout after copy. Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 4570	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW	No	No	No	Recommended driver:CANON-MFP-BW Limitations:Device state is detected over SNMP. counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 101. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 3570	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW	No	No	No	Recommended driver:CANON-MFP-BW Limitations:Device state is detected over SNMP. counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 101. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 3530	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW	No	No	No	Recommended driver:CANON-MFP-BW Limitations:Device state is detected over SNMP. counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 101. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 3045	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW	No	No	No	Recommended driver:CANON-MFP-BW Limitations:Device state is detected over SNMP. counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 101. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 3030	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW	No	No	No	Recommended driver:CANON-MFP-BW Limitations:Device state is detected over SNMP. counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 101. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 3025	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW	No	No	No	Recommended driver:CANON-MFP-BW Limitations:Device state is detected over SNMP. counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 101. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2870	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW	No	No	No	Recommended driver:CANON-MFP-BW Limitations:Device state is detected over SNMP. counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 101. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2830	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW	No	No	No	Recommended driver:CANON-MFP-BW Limitations:Device state is detected over SNMP. counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 101. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2270	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW	No	No	No	Recommended driver:CANON-MFP-BW Limitations:Device state is detected over SNMP. counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 101. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2230	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW	No	No	No	Recommended driver:CANON-MFP-BW Limitations:Device state is detected over SNMP. counters are read over HTTP. Counters for copy and print are shared. This driver is working with counters 101. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No
Canon	iR 2545	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW-A3-iR2530-V3	No	No	No	Recommended driver:CANON-MFP-BW-A3-iR2530-V3 Limitations:There is a 2 seconds timeout after print.There is a 2 seconds timeout after copy.Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	Cable supports off-line accounting A3/A4 BW.
Canon	iR 2535	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW-A3-iR2530-V3	No	No	No	Recommended driver:CANON-MFP-BW-A3-iR2530-V3 Limitations:There is a 2 seconds timeout after print.There is a 2 seconds timeout after copy.Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	Cable supports off-line accounting A3/A4 BW.
Canon	iR 2530	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW-A3-iR2530-V3	No	No	No	Recommended driver:CANON-MFP-BW-A3-iR2530-V3 Limitations:There is a 2 seconds timeout after print.There is a 2 seconds timeout after copy.Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	Cable supports off-line accounting A3/A4 BW.
Canon	iR 2525	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW-A3-iR2530-V3	No	No	No	Recommended driver:CANON-MFP-BW-A3-iR2530-V3 Limitations:There is a 2 seconds timeout after print.There is a 2 seconds timeout after copy.Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	Cable supports off-line accounting A3/A4 BW.
Canon	iR 2520	Image Runner	Yes	Yes	No	Yes	Yes	No	CANON-MFP-BW-A3-iR2530-V3	No	No	No	Recommended driver:CANON-MFP-BW-A3-iR2530-V3 Limitations:There is a 2 seconds timeout after print.There is a 2 seconds timeout after copy.Counters for copy and print are shared. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	Cable supports off-line accounting A3/A4 BW.
Canon	iR 1024iF	Image Runner	Yes	No	No	Yes	Yes	No	CANON-iR1024	No	No	No	Recommended driver:CANON-iR1024 Limitations:There is 5 seconds timeout after copy.There is 5 seconds timeout after print.Duplex copy is accounted as simplex.Duplex print is detected from print job parser. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	Possibility to scan to mail or scan to fax only
Canon	iR 1022iF	Image Runner	Yes	No	No	Yes	Yes	No	CANON-iR1024	No	No	No	Recommended driver:CANON-iR1024 Limitations:There is 5 seconds timeout after copy.There is 5 seconds timeout after print.Duplex copy is accounted as simplex.Duplex print is detected from print job parser. Post script license is required for YSoft Mobile print server.	No	No	No	No	No	No	No	No	Possibility to scan to mail or scan to fax only
Ricoh (Japan)	imagio Neo C240		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo C245		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo C285		No	Yes	Yes	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo C320		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo C325		No	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo 385		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo C385cp		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio Neo C385it		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio MP 2550B	imagio MP 3550/3550B/2550/2550B	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 7 JAVA 4.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP 2550	imagio MP 3550/3550B/2550/2550B	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 7 JAVA 4.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP 3350B	imagio MP 3550/3550B/2550/2550B	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 7 JAVA 4.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP 3350	imagio MP 3550/3550B/2550/2550B	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 7 JAVA 4.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP 2552	imagio MP 3352/2552	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 30 JAVA 7.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control) SRET affects energy saving mode behavior of these devices. If JAVA app is stopped while login to SRET, "interruption(copy)" mechanical button does not work. Requires device restart. Same as above, "Soft Off" switch does not work untill device restart. Same as above, "Off by Timer" does not work until device restart.
Ricoh (Japan)	imagio MP 3352	imagio MP 3352/2552	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 30 JAVA 7.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control) SRET affects energy saving mode behavior of these devices. If JAVA app is stopped while login to SRET, "interruption(copy)" mechanical button does not work. Requires device restart. Same as above, "Soft Off" switch does not work untill device restart. Same as above, "Off by Timer" does not work until device restart.
Ricoh (Japan)	imagio MP 4000B	imagio MP 5000/5000B/4000/4000B	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 7 JAVA 4.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP 4000	imagio MP 5000/5000B/4000/4000B	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 7 JAVA 4.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP 5000B	imagio MP 5000/5000B/4000/4000B	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 7 JAVA 4.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP 5000	imagio MP 5000/5000B/4000/4000B	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 7 JAVA 4.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP 4002	imagio MP 5002/4002	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 31 JAVA 10.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP 5002	imagio MP 5002/4002	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 31 JAVA 10.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP 6001	imagio MP 9001/7501/6001	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 18 When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP 7501	imagio MP 9001/7501/6001	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 18 When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP 9001	imagio MP 9001/7501/6001	Yes	Yes	No	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 18 When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP W5100	imagio MP W7140/W5100	No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio MP W7140	imagio MP W7140/W5100	No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Ricoh (Japan)	imagio MP C2200	imagio MP C2200	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 12 JAVA 4.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C2800	imagio MP C5000/C4000/C3300/C2800	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 12 JAVA 4.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C3300	imagio MP C5000/C4000/C3300/C2800	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 12 JAVA 4.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C4000	imagio MP C5000/C4000/C3300/C2800	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 12 JAVA 4.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C5000	imagio MP C5000/C4000/C3300/C2800	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 12 JAVA 4.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C2201	imagio MP C2201	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 24 JAVA 7.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C2801	imagio MP C3301/C2801	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 24 JAVA 7.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C3301	imagio MP C3301/C2801	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 24 JAVA 7.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C4001	imagio MP C5001/4001	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 24 JAVA 7.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C5001	imagio MP C5001/4001	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 24 JAVA 7.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C2802	imagio MP C5002/C4002/C3302/C2802	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 31 JAVA 10.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C3302	imagio MP C5002/C4002/C3302/C2802	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 31 JAVA 10.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C4002A	imagio MP C5002/C4002/C3302/C2802	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 31 JAVA 10.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C4002	imagio MP C5002/C4002/C3302/C2802	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 31 JAVA 10.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C5002A	imagio MP C5002/C4002/C3302/C2802	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 31 JAVA 10.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C5002	imagio MP C5002/C4002/C3302/C2802	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 31 JAVA 10.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C6000	imagio MP C7500/C6000	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 7 When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C7500	imagio MP C7500/C6000	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 7 When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C6001	imagio MP C7501/C6001	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 23 JAVA 7.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
Ricoh (Japan)	imagio MP C7501	imagio MP C7501/C6001	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	Yes	No	No	No	No	No	No	VM TYPE 23 JAVA 7.xx.xx When device is configured for Expansion device, remote print from the Document Box using Ridoc Desk application cannot be used (operation is denied due to Device access control)
IBM	Color 1534	Infoprint	No	No	Yes	Yes	No	No	IBM-PRN-COL-A4	No	No	No		No	No	No	No	No	No	No	No
IBM	1552	Infoprint	No	No	No	Yes	No	No	IBM-PRN-BW-A4	No	No	No		No	No	No	No	No	No	No	No
IBM	1540 MFP	Infoprint	Yes	Yes	Yes	Yes	No	No	IBM-MFP-BW-A3	No	No	No	Recommended driver:IBM-MFP-BW-A3 Limitations:Counters for copy and print are shared.	No	No	No	No	No	No	No	No
Fuji Xerox	C3055 DX	DocuPrint	No	Yes	Yes	Yes	No	No	FUJI-XEROX-PRN-COL-DP-C3055DX	No	No	No	Recommended driver:FUJI-XEROX-PRN-COL-DP-C3055DX Limitations: A3 is accounted as 1 x A4 Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Fuji Xerox	P355d	DocuPrint	No	No	No	Yes	No	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	M455df	DocuPrint	Yes	No	No	Yes	Yes	No	FUJI-XEROX-MFP-DP-M355DF	No	No	No	Recommended driver: FUJI-XEROX-MFP-DP-M355DF Limitations: Duplex copy is accounted as simplex. uplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Fuji Xerox	M355df	DocuPrint	Yes	No	No	Yes	Yes	No	FUJI-XEROX-MFP-DP-M355DF	No	No	No	Recommended driver: FUJI-XEROX-MFP-DP-M355DF Limitations: Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information. LD device from YSoft SafeQ 6 MU22.	No	No	No	Yes	No	No	No	No	LD device from YSoft SafeQ 6 MU22.
Fuji Xerox	C5005d	DocuPrint	No	No	Yes	Yes	No	No	FUJI-XEROX-COL-A3-DUP-DP-C5005D	No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	P455d	DocuPrint	No	No	No	Yes	No	No	FUJI-XEROX-DP-P455D	No	No	No	LD device from YSoft SafeQ 6 MU22.	No	No	No	Yes	No	No	No	No	LD device from YSoft SafeQ 6 MU22.
Fuji Xerox	CM405df	DocuPrint	Yes	No	Yes	Yes	Yes	No	FUJI-XEROX-MFP-COL-DP-CM405DF	No	No	No	Recommended driver:FUJI-XEROX-MFP-COL-DP-CM405DFLimitations: Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Fuji Xerox	CP405d	DocuPrint	No	No	Yes	Yes	No	No	FUJI-XEROX-PRN-COL-DP-CP405D	No	No	No	Recommended driver:FUJI-XEROX-PRN-COL-DP-CP405D Limitations: Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Fuji Xerox	CM505da	DocuPrint	Yes	No	Yes	Yes	Yes	No	FUJI-XEROX-MPF-COL-DUP-DP-CM505DA	No	No	No	Recommended driver: FUJI-XEROX-MPF-COL-DUP-DP-CM505DA	No	No	No	No	No	No	No	No
Fuji Xerox	CM305df	DocuPrint	Yes	No	Yes	Yes	No	No	FUJI-XEROX-MFP-COL-DP-CM305DF	No	No	No	Recommended driver:FUJI-XEROX-MFP-COL-DP-CM305DFLimitations: Duplex copy is accounted as simplex. Duplex print is detected by parser.	No	No	No	No	No	No	No	No
Fuji Xerox	2065	DocuPrint	No	No	No	Yes	No	No	FUJI-XEROX-2065	No	No	No	Recommended driver:FUJI-XEROX-2065 Limitations: Counters for copy and print are shared.	No	No	No	No	No	No	No	No	Same as Xerox WorkCentre M20i
Fuji Xerox	45	WorkCentre Pro	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	50	WorkCentre Pro	Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre 9000	Docu Centre	Yes	Yes	No	Yes	No	No	FUJI-XEROX-MFP-DUP-DC-9000	No	No	No	Recommended driver:FUJI-XEROX-MFP-DUP-DC-9000Limitations: There are 1 second timeouts after print and after copy. Each A3 page is accounted as A4 page.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort C5540I	ApeosPort	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort C6550I	ApeosPort	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort 7550I	ApeosPort	Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre II 6000	Docu Centre II	No	No	No	Yes	No	No	FUJI-XEROX-MFP-A3-DUP-DC-6000	No	No	No		No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre III 7000	Docu Centre III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre III 6000	Docu Centre III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre III 5000	Docu Centre III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre III 4000	Docu Centre III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre III 3010	Docu Centre III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre III 3007	Docu Centre III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre III 3005	Docu Centre III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre III 3000	Docu Centre III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre III 2007	Docu Centre III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre III 2000	Docu Centre III	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	4127 Copier & Printer	41x	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3Limtations: There is 2 seconds timeout after print. Driver is using separated duplex counters. Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	4112 Copier & Printer	41x	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3Limtations: There is 2 seconds timeout after print. Driver is using separated duplex counters. Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort 750I	ApeosPort	Yes	Yes	No	Yes	Yes	No	XEROX-MFP-BW-A3-5222	No	No	No	Recommended driver: XEROX-MFP-BW-A3-5222 Limitations: There is a 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4).	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort 650I	ApeosPort	Yes	Yes	No	Yes	Yes	No	XEROX-MFP-BW-A3-5222	No	No	No	Recommended driver: XEROX-MFP-BW-A3-5222 Limitations: There is a 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4).	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort 550I	ApeosPort	Yes	Yes	No	Yes	Yes	No	XEROX-MFP-BW-A3-5222	No	No	No	Recommended driver: XEROX-MFP-BW-A3-5222 Limitations: There is a 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4).	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort 450I	ApeosPort	Yes	Yes	No	Yes	Yes	No	XEROX-MFP-BW-A3-5222	No	No	No	Recommended driver: XEROX-MFP-BW-A3-5222 Limitations: There is a 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4).	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort 350I	ApeosPort	Yes	Yes	No	Yes	Yes	No	XEROX-MFP-BW-A3-5222	No	No	No	Recommended driver: XEROX-MFP-BW-A3-5222 Limitations: There is a 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4).	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-II 7000	ApeosPort-II	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-II 6000	ApeosPort-II	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-II 5000	ApeosPort-II	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-II 5010	ApeosPort-II	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-II 4000	ApeosPort-II	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-II 3000	ApeosPort-II	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-BW-A3-3005	No	No	No	Recommended driver:FUJI-XEROX-MFP-BW-A3-3005 Limitations: There is 1 second timeout after print. Printed/copied A3 prints/copies are accounted as A4 prints (1xA3 = 1xA4). Because of only one duplex counter for A3 and A4. A3 copies/prints are prioritized.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-II C4300	ApeosPort-II	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP	No	No	No	Recommended driver:FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP-V2 (for controller ROM version 1.42.xx or newer)FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP (for controller ROM version 1.41.xx or older) Limitations: There is a 1 second timeout after print. There is a 1 second timeout after copy. Each A3 page is accounted as A4 page. Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-II C3300	ApeosPort-II	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP	No	No	No	Recommended driver:FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP-V2 (for controller ROM version 1.42.xx or newer)FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP (for controller ROM version 1.41.xx or older) Limitations: There is a 1 second timeout after print. There is a 1 second timeout after copy. Each A3 page is accounted as A4 page. Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-II 2200	ApeosPort-II	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP	No	No	No	Recommended driver:FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP-V2 (for controller ROM version 1.42.xx or newer)FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP (for controller ROM version 1.41.xx or older) Limitations: There is a 1 second timeout after print. There is a 1 second timeout after copy. Each A3 page is accounted as A4 page. Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-II C7500	ApeosPort-II	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP	No	No	No	Recommended driver:FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP-V2 (for controller ROM version 1.42.xx or newer)FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP (for controller ROM version 1.41.xx or older) Limitations: There is a 1 second timeout after print. There is a 1 second timeout after copy. Each A3 page is accounted as A4 page. Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-II C6500	ApeosPort-II	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP	No	No	No	Recommended driver:FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP-V2 (for controller ROM version 1.42.xx or newer)FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP (for controller ROM version 1.41.xx or older) Limitations: There is a 1 second timeout after print. There is a 1 second timeout after copy. Each A3 page is accounted as A4 page. Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-II C5400	ApeosPort-II	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP	No	No	No	Recommended driver:FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP-V2 (for controller ROM version 1.42.xx or newer)FUJI-XEROX-MFP-COL-DUP-AP-II-C4300-JP (for controller ROM version 1.41.xx or older) Limitations: There is a 1 second timeout after print. There is a 1 second timeout after copy. Each A3 page is accounted as A4 page. Duplex copy is accounted as simplex. Duplex print is accounted according to parser from job information.	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-III C7600	ApeosPort-III	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-III C6500	ApeosPort-III	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-III C5500	ApeosPort-III	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-III C4400	ApeosPort-III	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	D95 Printer	Production	Yes	Yes	No	Yes	No	No	FUJI-XEROX-MFP-BW-A3-D110	No	No	No	Recommended driver: FUJI-XEROX-MFP-BW-A3-D110Limitations: There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy.	No	No	No	No	No	No	No	No
Fuji Xerox	C4430	DocuCenter-IV	Yes	No	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APIV-C4430-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APIV-C4430-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre IV 5070	Docu Centre IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-JP	No	No	No	Recommended driver:FUJI-XEROX-MFP-DCIV-XX80-JPLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Each A3 page is accounted as A4 page. When Offline copy accounting is used, each A3 page is accounted as two A4 pages. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre IV 4070	Docu Centre IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-JP	No	No	No	Recommended driver:FUJI-XEROX-MFP-DCIV-XX80-JPLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Each A3 page is accounted as A4 page. When Offline copy accounting is used, each A3 page is accounted as two A4 pages. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	7080	DocuCenter-IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-DCIV-XX80-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	6080	DocuCenter-IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-DCIV-XX80-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	5080	DocuCenter-IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-DCIV-XX80-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	3065	DocuCenter-IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-DCIV-XX80-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	3060	DocuCenter-IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-DCIV-XX80-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	2060	DocuCenter-IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-DCIV-XX80-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C7780	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C6680	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C5580	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C7775 T2	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C7775	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C6675 T2	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C6675	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C5575 T2	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C5575	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C4475 T2	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C4475	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C3375 T2	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C3375	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C3373 T2	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C3373	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C2275 T2	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C2275	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C5570	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C4470	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C3371	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C3370	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C2270	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C2265	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C2263	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C2260	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V 5070	Docu Centre V	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-JP	No	No	No	Recommended driver:FUJI-XEROX-MFP-DCIV-XX80-JPLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Each A3 page is accounted as A4 page. When Offline copy accounting is used, each A3 page is accounted as two A4 pages. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V 4070	Docu Centre V	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-JP	No	No	No	Recommended driver:FUJI-XEROX-MFP-DCIV-XX80-JPLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Each A3 page is accounted as A4 page. When Offline copy accounting is used, each A3 page is accounted as two A4 pages. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V 7080	Docu Centre V	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-DCIV-XX80-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V 6080	Docu Centre V	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-DCIV-XX80-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	D95 Light Publisher	Production	Yes	Yes	No	Yes	No	No		No	No	No		Yes	No	No	No	No	No	Yes	No	Tested FW: D125=1.104.12
Fuji Xerox	D110	Production	Yes	Yes	No	Yes	No	No	FUJI-XEROX-MFP-BW-A3-D110	No	No	No	Recommended driver: FUJI-XEROX-MFP-BW-A3-D110Limitations: There is a 2 seconds timeout after print. There is a 2 seconds timeout after copy.	No	No	No	No	No	No	No	No
Fuji Xerox	D125	Production	Yes	Yes	No	Yes	No	No		No	No	No		Yes	No	No	No	No	No	Yes	No	Tested FW: D125=1.104.12
Fuji Xerox	ApeosPort-IV C5570	ApeosPort-IV	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	Yes	Tested FW C4470(Tested for n-XCP with EPA reader only): Controller ROM: 1.120.14 SJFI: 3.0.18 SSMI: 1.16.0 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal Generation 1/2 and USB card reader are not suported on ApeosPort-IV Generation 1 models with XCP version 1.1.x and older. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-IV C4470	ApeosPort-IV	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	Yes	Tested FW C4470(Tested for n-XCP with EPA reader only): Controller ROM: 1.120.14 SJFI: 3.0.18 SSMI: 1.16.0 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal Generation 1/2 and USB card reader are not suported on ApeosPort-IV Generation 1 models with XCP version 1.1.x and older. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-IV C3371	ApeosPort-IV	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	No
Fuji Xerox	ApeosPort-IV C3370	ApeosPort-IV	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	Yes	Tested FW C4470(Tested for n-XCP with EPA reader only): Controller ROM: 1.120.14 SJFI: 3.0.18 SSMI: 1.16.0 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal Generation 1/2 and USB card reader are not suported on ApeosPort-IV Generation 1 models with XCP version 1.1.x and older. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-IV C2270	ApeosPort-IV	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	Yes	Tested FW C4470(Tested for n-XCP with EPA reader only): Controller ROM: 1.120.14 SJFI: 3.0.18 SSMI: 1.16.0 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal Generation 1/2 and USB card reader are not suported on ApeosPort-IV Generation 1 models with XCP version 1.1.x and older. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-IV C4430	ApeosPort-IV	Yes	No	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APIV-C4430-APO	No	No	No	Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	Yes	EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal Generation 1/2 and USB card reader are not suported on ApeosPort-IV Generation 1 models with XCP version 1.1.x and older. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black
Fuji Xerox	ApeosPort-IV C7780	ApeosPort-IV	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	Yes	Tested FW = 1.104.28 EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal Generation 1/2 and USB card reader are not suported on ApeosPort-IV Generation 1 models with XCP version 1.1.x and older. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black
Fuji Xerox	ApeosPort-IV C6680	ApeosPort-IV	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	Yes	EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal Generation 1/2 and USB card reader are not suported on ApeosPort-IV Generation 1 models with XCP version 1.1.x and older. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black
Fuji Xerox	ApeosPort-IV C5580	ApeosPort-IV	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	Yes	EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal Generation 1/2 and USB card reader are not suported on ApeosPort-IV Generation 1 models with XCP version 1.1.x and older. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black
Fuji Xerox	ApeosPort-IV 5070	ApeosPort-IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-JP	No	No	No	Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Each A3 page is accounted as A4 page. When Offline copy accounting is used, each A3 page is accounted as two A4 pages. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	Yes	Tested FW 4070(n XCP terminal with EPA card reader only was tested): Controller ROM: 1.120.14 SJFI: 3.0.18 SSMI: 1.16.0 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal Generation 1/2 and USB card reader are not suported on ApeosPort-IV Generation 1 models with XCP version 1.1.x and older. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-IV 4070	ApeosPort-IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-JP	No	No	No	Recommended driver:FUJI-XEROX-MFP-DCIV-XX80-JP Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Each A3 page is accounted as A4 page. When Offline copy accounting is used, each A3 page is accounted as two A4 pages. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	Yes	Tested FW 4070(n XCP terminal with EPA card reader only was tested): Controller ROM: 1.120.14 SJFI: 3.0.18 SSMI: 1.16.0 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal Generation 1/2 and USB card reader are not suported on ApeosPort-IV Generation 1 models with XCP version 1.1.x and older. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-IV 3070	ApeosPort-IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-JP	No	No	No	Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Each A3 page is accounted as A4 page. When Offline copy accounting is used, each A3 page is accounted as two A4 pages. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	Yes	Tested FW 4070(n XCP terminal with EPA card reader only was tested): Controller ROM: 1.120.14 SJFI: 3.0.18 SSMI: 1.16.0 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal Generation 1/2 and USB card reader are not suported on ApeosPort-IV Generation 1 models with XCP version 1.1.x and older. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-IV 3065	ApeosPort-IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-APO	No	No	No	Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	Yes	Tested FW 3065(Tested for n-XCP with EPA reader only): Controller ROM: 1.131.10 SJFI: 3.3.0 SSMI: 1.20.1 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal and USB interface Card reader are not supported on ApeosPort-IV generation 1 models with XCP version older than 1.2. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is suported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-IV 3060	ApeosPort-IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-APO	No	No	No	Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	Yes	Tested FW 3065(Tested for n-XCP with EPA reader only): Controller ROM: 1.131.10 SJFI: 3.3.0 SSMI: 1.20.1 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal and USB interface Card reader are not supported on ApeosPort-IV generation 1 models with XCP version older than 1.2. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is suported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-IV 2060	ApeosPort-IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-APO	No	No	No	Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	No	No	No	No	No	Yes	Yes	Tested FW 3065(Tested for n-XCP with EPA reader only): Controller ROM: 1.131.10 SJFI: 3.3.0 SSMI: 1.20.1 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal and USB interface Card reader are not supported on ApeosPort-IV generation 1 models with XCP version older than 1.2. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is suported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-IV 7080	ApeosPort-IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-APO	No	No	No	Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW: 6080=1.101.9, 7080=1.101.9 EPA interface Card reader is supported with EBW terminal using Authentication Agent. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black
Fuji Xerox	ApeosPort-IV 6080	ApeosPort-IV	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-APO	No	No	No	Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW: 6080=1.101.9, 7080=1.101.9 EPA interface Card reader is supported with EBW terminal using Authentication Agent. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black)
Fuji Xerox	ApeosPort-IV C5575	ApeosPort-IV	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW C2275 Controller ROM: 1.131.5 SJFI: 3.3.0 SSMI: 1.20.1 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal and USB interface Card reader are not supported on ApeosPort-IV generation 1 models with XCP version older than 1.2. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is suported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-IV C4475	ApeosPort-IV	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW C2275 Controller ROM: 1.131.5 SJFI: 3.3.0 SSMI: 1.20.1 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal and USB interface Card reader are not supported on ApeosPort-IV generation 1 models with XCP version older than 1.2. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is suported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-IV C3375	ApeosPort-IV	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW C2275 Controller ROM: 1.131.5 SJFI: 3.3.0 SSMI: 1.20.1 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal and USB interface Card reader are not supported on ApeosPort-IV generation 1 models with XCP version older than 1.2. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is suported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-IV C3373	ApeosPort-IV	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW C2275: Controller ROM: 1.131.5 SJFI: 3.3.0 SSMI: 1.20.1 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal and USB interface Card reader are not supported on ApeosPort-IV generation 1 models with XCP version older than 1.2. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is suported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-IV C2275	ApeosPort-IV	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW C2275: Controller ROM: 1.131.5 SJFI: 3.3.0 SSMI: 1.20.1 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. XCP Terminal and USB interface Card reader are not supported on ApeosPort-IV generation 1 models with XCP version older than 1.2. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is suported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V C7780	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW version C5580: Controller ROM: 1.3.7 SJFI: Version 3.5.0 SSMI: Version 1.21.0 RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) USB card reader is suported with XCP terminal. 2nd Gen Browser terminal is not tested. When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V C7775	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW C7775: Controller ROM: 1.3.26 SJFI: 3.5.0 SSMI: 1.21.0 RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) USB card reader is suported with XCP terminal. 2nd Gen Browser terminal is not tested. When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V C6680	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW version C5580: Controller ROM: 1.3.7 SJFI: Version 3.5.0 SSMI: Version 1.21.0 RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black). USB card reader is suported with XCP terminal. 2nd Gen Browser terminal is not tested. When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V C6675	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW C7775: Controller ROM: 1.3.26 SJFI: 3.5.0 SSMI: 1.21.0 RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) USB card reader is suported with XCP terminal. 2nd Gen Browser terminal is not tested. When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V C5580	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW version C5580: Controller ROM: 1.3.7 SJFI: Version 3.5.0 SSMI: Version 1.21.0 RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) USB card reader is suported with XCP terminal. 2nd Gen Browser terminal is not tested. When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V C5575	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW C7775: Controller ROM: 1.3.26 SJFI: 3.5.0 SSMI: 1.21.0 RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) USB card reader is suported with XCP terminal. 2nd Gen Browser terminal is not tested. When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V C4475	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW C7775: Controller ROM: 1.3.26 SJFI: 3.5.0 SSMI: 1.21.0 RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) USB card reader is suported with XCP terminal. 2nd Gen Browser terminal is not tested. When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V 3375	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW C7775: Controller ROM: 1.3.26 SJFI: 3.5.0 SSMI: 1.21.0 RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) USB card reader is suported with XCP terminal. 2nd Gen Browser terminal is not tested. When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V C3373	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes
Fuji Xerox	ApeosPort-V C2275	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW C7775: Controller ROM: 1.3.26 SJFI: 3.5.0 SSMI: 1.21.0 RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) USB card reader is suported with XCP terminal. 2nd Gen Browser terminal is not tested. When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V C7780 T2	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C5580 Controller ROM: 1.3.7 SJFI: Version 3.5.0 SSMI: Version 1.21.0 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V C7775 T2	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C7775: Controller ROM: 1.3.26 SJFI: 3.5.0 SSMI: 1.21.0 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V C6680 T2	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C5580 Controller ROM: 1.3.7 SJFI: Version 3.5.0 SSMI: Version 1.21.0 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V C6675 T2	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C7775: Controller ROM: 1.3.26 SJFI: 3.5.0 SSMI: 1.21.0 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V C5580 T2	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C5580 Controller ROM: 1.3.7 SJFI: Version 3.5.0 SSMI: Version 1.21.0 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V C5575 T2	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C7775: Controller ROM: 1.3.26 SJFI: 3.5.0 SSMI: 1.21.0 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V C4475 T2	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C7775: Controller ROM: 1.3.26 SJFI: 3.5.0 SSMI: 1.21.0 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V C3375 T2	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C7775: Controller ROM: 1.3.26 SJFI: 3.5.0 SSMI: 1.21.0 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V C3373 T2	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	SafeQ5 XCP terminal tested with the FW version 2.1.1 USB readers: USB reader for AIP6 XCP terminal EPA reader for AIP5 terminal & SafeQ4 Current version of SafeQ6 have certain limitations and defects under work. Contact Y Soft for detail.
Fuji Xerox	ApeosPort-V C2275 T2	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C7775: Controller ROM: 1.3.26 SJFI: 3.5.0 SSMI: 1.21.0 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V 4020	ApeosPort-V	Yes	No	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-JP	No	No	No	Recommended driver: FUJI-XEROX-MFP-DCIV-XX80-JP Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Each A3 page is accounted as A4 page. When Offline copy accounting is used, each A3 page is accounted as two A4 pages. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	DocuPrint M465 AP requirs optional External Access Kit to run Terminal Embedded Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is supported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	DocuPrint M465 AP	ApeosPort-V	Yes	No	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-JP	No	No	No	Recommended driver:FUJI-XEROX-MFP-DCIV-XX80-JP Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Each A3 page is accounted as A4 page. When Offline copy accounting is used, each A3 page is accounted as two A4 pages. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	DocuPrint M465 AP requirs optional External Access Kit to run Terminal Embedded Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is supported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V C3320	ApeosPort-V	Yes	No	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW: CM415AP Controller ROM: 1.2.7 SJFI: 3.7.1 SJFI: 3.7.1 Tested FW: C3320 Controller ROM: 1.2.5 DocuPrint CM415 AP requirs optional External Access Kit to run Terminal Embedded Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is supported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	DocuPrint CM415 AP	ApeosPort-V	Yes	No	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-APDCV-CXXX5-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW: CM415AP Controller ROM: 1.2.7 SJFI: 3.7.1 SJFI: 3.7.1 Tested FW: C3320 Controller ROM: 1.2.5 DocuPrint CM415 AP requirs optional External Access Kit to run Terminal Embedded Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is supported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V 5070	ApeosPort-V	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-JP	No	No	No	Recommended driver: FUJI-XEROX-MFP-DCIV-XX80-JP Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Each A3 page is accounted as A4 page. When Offline copy accounting is used, each A3 page is accounted as two A4 pages. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW version 5070: Controller ROM: 1.0.12 SJFI: Version 3.7.0 SSMI: Version 1.24.0 RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) USB card reader is suported with XCP terminal. 2nd Gen Browser terminal is not tested. When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V 4070	ApeosPort-V	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-JP	No	No	No	Recommended driver: FUJI-XEROX-MFP-DCIV-XX80-JP Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Each A3 page is accounted as A4 page. When Offline copy accounting is used, each A3 page is accounted as two A4 pages. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW version 5070: Controller ROM: 1.0.12 SJFI: Version 3.7.0 SSMI: Version 1.24.0 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is supported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V 7080	ApeosPort-V	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-DCIV-XX80-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW 6080: Controller ROM: 1.0.16 SJFI: 3.7.2 SSMI: 1.24.2 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is supported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	ApeosPort-V 6080	ApeosPort-V	Yes	Yes	No	Yes	Yes	No	FUJI-XEROX-MFP-DCIV-XX80-APO	No	No	No	Recommended driver: FUJI-XEROX-MFP-DCIV-XX80-APO Limitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Tested FW 6080: Controller ROM: 1.0.16 SJFI: 3.7.2 SSMI: 1.24.2 Tested Terminal n-XCP Generation 1: YES NON-XCP Generation 2: XCP Generation 1: YES XCP Generation 2: EPA interface Card reader is supported with EBW terminal using Authentication Agent. For XCP Terminal Generation 1 and USB card reader, FW version supporting XCP 1.2+ required. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. USB card reader is supported in combination with XCP terminal. RBE - Watermark does not work Scan in Black color with Workflow Scan generates Graycolor scan Scan to JPEG in 1 color or 2 colors with Workflow Scan generates TIFF in Black (Device does not support 1 color or 2 colors scan and JPEG in Black) When Payment system is integrated and the parameter "fujiXeroxEnableDefaultQuotaTogglingStrategy" is set to "disabled", Print All jobs after login function is not supported.
Fuji Xerox	Docu Centre V C7776	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C6676	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C5576	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C4476	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C3376	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	Docu Centre V C2276	Docu Centre V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	Recommended driver:FUJI-XEROX-MFP-APDCV-CXXX5-APOLimitations: There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	No	No	No	No	No	No	No	No
Fuji Xerox	ApeosPort-V C7776	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C2276: Controller ROM: 1.2.2 SJFI: 3.10.0 SSMI: 1.25.4 Contents: 2.0.12 Plugin: 1.0.6 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V C6676	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C2276: Controller ROM: 1.2.2 SJFI: 3.10.0 SSMI: 1.25.4 Contents: 2.0.12 Plugin: 1.0.6 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V C5576	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C2276: Controller ROM: 1.2.2 SJFI: 3.10.0 SSMI: 1.25.4 Contents: 2.0.12 Plugin: 1.0.6 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V C4476	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C2276: Controller ROM: 1.2.2 SJFI: 3.10.0 SSMI: 1.25.4 Contents: 2.0.12 Plugin: 1.0.6 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V C3376	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C2276: Controller ROM: 1.2.2 SJFI: 3.10.0 SSMI: 1.25.4 Contents: 2.0.12 Plugin: 1.0.6 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Fuji Xerox	ApeosPort-V C2276	ApeosPort-V	Yes	Yes	Yes	Yes	Yes	No	FUJI-XEROX-MFP-APDCV-CXXX5-APO	No	No	No	There is a 3 seconds timeout after print. Scan counter starts from 1. Driver can be set for offline copy accounting. Scan to storage is not accounted. (Only Scan transfered via network is accounted).	Yes	Yes	No	No	No	No	Yes	Yes	Information about the tested device C2276: Controller ROM: 1.2.2 SJFI: 3.10.0 SSMI: 1.25.4 Contents: 2.0.12 Plugin: 1.0.6 General XCP Terminal Generation 1 and USB card reader requires FW version supporting XCP 1.2+. XCP Terminal Generation 2 requires FW version supporting XCP1.4+. AIP7(FUJIFILM BI(ACTIVE)) is not supported. SafeQ5 XCP Terminal requires SafeQ5 MU65 or newer. SafeQ6 Build29 ~ 75 - XCP Terminal requires SafeQ6 MU29 or newer. Build76 and newer - Should choose FUJI XEROX XCP(Maintained) when installing Terminal Embedded. Build76 and newer - n-XCP Native Authentication Agent is still supported. Choose FUJI XEROX(Maintained) for installation. Installation and uninstallation XCP Terminal requires Signature Verification disabled. (Admin login > System > Plug-in Settings > Toggle “Signature Verification when Adding/Updating” to disabled ) If installing/reinstalling terminal fail when device takes longer than 35 seconds for rebooting, change the value of the parameter "FujiXeroxFinishRebootDelay" to longer value like 60. Color copy access control To restrict access to Full-color copy by the user access right setting, it requires the following setting. Log in to the device as Administrator -> Permissions > Permissions > Access Control and set Color Copying to Locked and click Save. Fax access control If you want to restrict access to FAX application by the user access right, it requires "850-015" to be set to "1" in the CE mode. Accounting Print job accounting requires “701-436” to be set to “0” in the CE mode. Payment System If you want to manage scan by credit/quota, it requires "850-015" to be set to "1" in the CE mode.
Savin	3224C		Yes	Yes	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	3045		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	3035		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	3030		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	3025		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	270		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2238C		Yes	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2232C		Yes	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2228C		Yes	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	220		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2105 EB-105EX		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2105		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2090 EB-105EX		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2090		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2075		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2060		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2051		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2045e		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2045		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2035e		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2035		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2032		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2027		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2022		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2020D		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2020		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2018D		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2018		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2016		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	2015		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	1515		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	1232C		Yes	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	1224C		Yes	No	Yes	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	1075		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	1060		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	1045		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	1035		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	1032		No	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	1027		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	1022		Yes	Yes	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	1018D		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No
Savin	1018		Yes	No	No	Yes	Yes	No		No	No	No		No	No	No	No	No	No	No	No

Show

Hardware compatibility list

Product version

Displayed parameters

Devices list

Vendor

Model

Family

MFD

A3

Color

Duplex

Smart cable

Online accounting

Online accounting driver

Pure Cloud Terminal

Print

Secondary Gateway Embedded Terminal

Online Accounting Driver Limitations

Payment system

USB Card Reader

Network Card Reader

LD License

Finishing Options

YSoft Universal Print Driver

SAFEQ 5 Embedded Terminal

SAFEQ 6 Embedded Terminal

Comment

Subscribe to our newsletter